1、IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications IEEE Std C37.238-2017 (Revision of IEEE Std C37.238-2011) IEEE Power and Energy Society Sponsored by the Power System Relaying Committee and the Substations Committee IEEE 3 Park Avenue New York, NY 10016
2、-5997 USAIEEE Std C37.238-2017 (Revision of IEEE Std C37.238-2011) IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications Sponsor Power System Relaying Committee and Substations Committee of the IEEE Power and Energy Society Approved 23 March 2017 IEEE-SA Sta
3、ndards BoardAbstract: An extended profile is specified for the use of Precision Time Protocol of IEEE Std 1588-2008 in power system protection, control, automation, and data communication applications utilizing an Ethernet communications architecture. Keywords: grandmaster clock, IEEE 1588, IEEE C37
4、.238, power substation, precise time synchronization, Precision Time Protocol, PTP, sample synchronization, slave-only clock, synchrophasors, transparent clock The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of E
5、lectrical and Electronics Engineers, Inc. All rights reserved. Published 19 June 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of mat
6、erial. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to p
7、roduce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments rece
8、ived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utili
9、zing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE
10、LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT L
11、IABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations Th
12、e IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed
13、 in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational cours
14、es, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any intere
15、sted party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments.
16、Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide
17、 an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE wo
18、rking group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any
19、IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in com
20、pliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. Th
21、ese include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights i
22、n copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commer
23、cial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the
24、 Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An off
25、icial IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revisio
26、n process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current
27、 edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-
28、SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is call
29、ed to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or paten
30、t applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licen
31、ses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received
32、. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assur
33、ance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtai
34、ned from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this standard was submitted to the IEEE-SA Standards Board for approval, the IEEE 1588 Profile for Power System Applications Working Group had the following membership: Galina S. Antonova, Ch
35、air William Dickerson, Vice Chair Mark Adamiak Alex Apostolov Christoph Brunner James Bougie Michael Dood Roman Graf Didier Giarratano Herb Falk Richard Harada Christopher R. Huntley David M. E. Ingram Hubert Kirrmann Bruce Muschlitz R. Jay Murphy Markus Renz Greg Rzepka Veselin Skendzic Timothy Tib
36、bals Sergiu Zimath The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Mark Adamiak Ali Al A wazi M. Victoria Alonso Galina S. Antonova Douglas Arnold Roberto Asano Philip Beaumont Rob
37、ert Beresh William Bloethe Klaus Brand Gustavo Brunello William Byrd Paul Cardinal Randall Crellin Ratan Das William Dickerson Michael Dood Neal Dowling Denis Dufournet Dan Dwyer Lee Eccles John Egan Christian Frei Fredric Friend Frank Gerleve Jalal Gohari Roman Graf Randall Groves Ajit Gwal James H
38、ackett Roger Hedding Werner Hoelzl Yi Hu Richard Hunt C. Huntley David M.E. Ingram Innocent Kamwa Piotr Karocki Yuri Khersonsky Hubert Kirrmann Jim Kulchisky Marc Lacroix Chung-Yiu Lam John Mackay Pierre Martin William McBride David Mcginn R. Murphy Bruce Muschlitz Michael Newman Lorraine Padden Cha
39、rles Petras Donald Platts Farnoosh Rahmatian Michael Roberts Silvana Rodrigues M. Sachdev Bartien Sayogo Thomas Schossig Maik Seewald Veselin Skendzic Brian Smellie John Spare Walter Struppler Stefan Svensson David Tepen Eric Thibodeau Timothy Tibbals Joe Uchiyama Eric Udren Benton V andiver John V
40、ergis Stephen Webb Karl Weber Roger Whittaker Philip Winston Oren Y uen Daidi Zhong Sergio Zimath7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this standard on 23 March 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair
41、John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member Emeritus
