1、 IEEE Standard for Local and metropolitan area networks Bridges and Bridged Networks Amendment 23: Application Virtual Local Area Network (VLAN) Type, Length, Value (TLV) Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.1Q
2、cd-2015 (Amendment to IEEE Std 802.1Q-2014) IEEE Std 802.1Qcd-2015(Amendment toIEEE Std 802.1Q-2014)IEEE Standard for Local and metropolitan area networksBridges and Bridged NetworksAmendment 23: Application Virtual Local Area Network (VLAN) Type, Length, Value (TLV)SponsorLAN/MAN Standards Committe
3、eof theIEEE Computer SocietyApproved 16 February 2015IEEE SA-Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2015 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 13 March 2015.
4、 Printed in the United States of America.IEEE and 802 are registered trademarks in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness ofmaterial. In addition, IEEE disclaims any and all conditions relating to: results; a
5、nd workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and services related
6、 tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE
7、 is not suggesting or rendering professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in
8、the exercise of reasonable care in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INC
9、LUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, U
10、SE OF, OR RELIANCE UPONANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.iv Copyright 2015 IEEE. All rights reserved.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the eventtha
11、t an IEEE standard is translated, only the English version published by IEEE should be considered theapproved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to b
12、e the official position of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should b
13、e considered the personal views of that individual rather than theformal position of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting informatio
14、n or advicepertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments a
15、nd questions also receivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. Fo
16、r the same reason, IEEE does notrespond to interpretation requests. Any person who would like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Ho
17、es Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are
18、 responsible for observing or referring to the applicableregulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards
19、are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion
20、of engineering practices and methods. By making these documents available for use andadoption by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.Copyright 2015 IEEE. All rights reserved. vPhotocopies Subject to payment of the appropriate fee, IEEE wi
21、ll grant users a limited, non-exclusive license tophotocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive,
22、 Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may
23、 be superseded at any timeby the issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata th
24、en in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. User
25、s are cautioned to check to determine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ie
26、ee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more informationabout the IEEE SA or IOWAs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the f
27、ollowing URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standa
28、rd, no position is taken by the IEEE with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/stand
29、ards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether the Submitter is willing or unwilling to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscriminatio
30、n to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope o
31、f Patents Claims, or determining whether any licensing terms orconditions provided in connection with submission of a Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any
32、 patent rights, and the risk of infringement of such rights, is entirely theirown responsibility. Further information may be obtained from the IEEE Standards Association.vi Copyright 2015 IEEE. All rights reserved.ParticipantsAt the time this standard was submitted to the IEEE-SA Standards Board for
33、 approval, the IEEE 802.1Working Group had the following membership:Glenn Parsons, Working Group ChairJohn Messenger, Working Group Vice ChairStephen Haddock, Chair, Interworking Task GroupMichael Seaman, Chair, Security Task GroupMichael Johas Teener, Chair, Time Sensitive Networking Task GroupPatr
34、icia Thaler, Chair, Data Center Bridging Task GroupMaximilian Riegel, Chair, OmniRAN Task GroupEric Gray, Recording SecretaryTing AoChristian Boiger Paul Bottorff David Chen Feng Chen Weiying Cheng Diego Crupnicoff Rodney Cummings Patrick Diamond Aboubacar Kader Diarra Janos Farkas Norman Finn Geoff
35、rey Garner Anoop Ghanwani Mark Gravel Craig Gunther Hitosh Hayakawa Jeremy Hitt Rahil Hussain Anthony Jeffree Peter Jones Hal Keen Marcel Kiessling Yongbum Kim Philippe Klein Jouni Korhonen Jeff Lynch Ben Mack-Crane Christophe Mangin James McIntosh Eric Multanen Donald Pannell Karen Randall Dan Roma
36、scanu Jessy V. Rouyer Panagiotis Saltsidis Behcet Sarikaya Daniel Sexton Johannes Specht Kevin B. Stanton Wilfried Steiner Vahid Tabatabaee Jeremy Touve Karl Weber Yuehua Wei Brian Weis Jordon Woods Juan-Carlos ZunigaCopyright 2015 IEEE. All rights reserved. viiThe following members of the individua
37、l balloting committee voted on this standard. Balloters may havevoted for approval, disapproval, or abstention. Thomas AlexanderNancy BravinWilliam ByrdJuan CarreonRodney CummingsYezid DonosoRichard EdgarYukihiro FujimotoDevon GayleAnoop GhanwaniJoel GoergenRandall GrovesMichael GundlachWerner Hoelz
38、lC. HuntleyNoriyuki IkeuchiAtsushi ItoRaj JainAnthony JeffreeShinkyo KakuPiotr KarockiStuart KerryMorteza KhodaieBruce KraemerYasushi KudohMichael LynchElvis MaculubaRichard MellitzJose MoralesEric MultanenMichael NewmanNick S.A. NikjooSatoshi ObaraJean Pierre PicardR. K. RannowAlon RegevMaximilian
39、RiegelRobert RobinsonDan RomascanuJessy V. RouyerPeter SaundersonVeselin SkendzicKapil SoodThomas StaraiEugene StoudenmireWalter StrupplerPatricia ThalerDmitri VarsanofievPrabodh VarshneyGeorge VlantisHung-Yu WeiAndreas WolfOren YuenDaidi Zhongviii Copyright 2015 IEEE. All rights reserved.When the I
40、EEE-SA Standards Board approved this standard on 16 February 2015, it had the followingmembership:John Kulick, ChairJon Walter Rosdahl, Vice ChairRichard H. Hulett, Past ChairKonstantinos Karachalios, Secretary*Member EmeritusAlso included are the following nonvoting IEEE-SA Standards Board liaisons
41、:Richard DeBlasio, DOE RepresentativeMichael Janezic, NIST RepresentativeMichelle TurnerIEEE-SA Content Production and ManagementKathryn BennettIEEE-SA Technical Program OperationsPeter BalmaFarooq BariTed BurseClint ChaplainStephen DukesJean-Phillippe FaureGary HoffmanMichael JanezicJeffrey KatzJos
42、eph L. Koepfinger*David J. LawHung LingOleg LogvinovT. W. OlsenGlenn ParsonsRon PetersonAdrian StephensPeter SutherlandYatin TrivediPhil WinstonDon WrightYu YuanCopyright 2015 IEEE. All rights reserved. ixIntroductionThis amendment specifies the protocols, procedures, and management objects for an A
43、pplication VirtualLocal Area Network (VLAN) identifier (ID) Type, Length, Value (TLV) within the Data Center BridgingeXchange protocol (DCBX) defined in IEEE Std 802.1Q. This standard also specifies minor extensions andeditorial corrections to the Application Priority TLV.This standard contains stat
44、e-of-the-art material. The area covered by this standard is undergoing evolution.Revisions are anticipated within the next few years to clarify existing material, to correct possible errors, andto incorporate new related material. Information on the current revision state of this and other IEEE 802s
45、tandards may be obtained fromSecretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854-4141USAThis introduction is not part of IEEE Std 802.1Qcd-2015, IEEE Standard for Local and metropolitan areanetworksBridges and Bridged NetworksAmendment 23: Application Virtual Local Area Network (VLAN
46、)Type, Length, Value (TLV).x Copyright 2015 IEEE. All rights reserved.Copyright 2015 IEEE. All rights reserved. xiContents2. Normative references 25. Conformance . 338. Data Center Bridging eXchange protocol (DCBX) 438.1 Overview 4Annex A (normative) PICS proformaBridge implementations . 5A.35 Data
47、Center Bridging eXchange protocol (DCBX). 5Annex B (normative) PICS proformaEnd station implementations 6B.14 Data Center Bridging eXchange protocol (DCBX). 6Annex D (normative) IEEE 802.1 Organizationally Specific TLV. 7D.1 Requirements of the IEEE 802.1 Organizationally Specific TLV sets 7D.2 Orga
48、nizationally Specific TLV definitions 8D.4 PICS proforma for IEEE 802.1 Organizationally Specific TLV extensions . 12D.5 IEEE 802.1/LLDP extension MIB. 12xii Copyright 2015 IEEE. All rights reserved.List of figuresFigure D-12Application Priority TLV format . 8Figure D-15Application VLAN TLV format 9
49、Copyright 2015 IEEE. All rights reserved. xiiiList of tablesTable D-1 IEEE 802.1 Organizationally Specific TLVs specified in this standard 7Table D-8Application Priority Table Entry format . 8Table D-9Sel field values 9Table D-12Application VLAN Table Entry format 10Table D-13Sel field values 11Table D-14IEEE 802.1 extension MIB object group conformance requirements. 12Table D-15IEEE 802.1/LLDP extension MIB object cross reference. 12Copyright 2015 IEEE. All rights reserved. 1IEEE Standard for Local and metropolitan area networksBridges and
