1、Copyright 1998 IEEE All Rights Reserved 1IEEE Std 716-1995 (R2011)(Revision of IEEE Std 716-1989)Standard Test Language for AllSystemsCommon/Abbreviated TestLanguage for All Systems (C/ATLAS)Sponsor716 C/ATLAS Subcommitteeof theIEEE Standards Coordinating Committee 20Approved March 16, 1995Reaffirme
2、d December 7, 2011IEEE-SA Standards BoardAbstract: A high order language for testing is defined. This language is designed to describe tests in terms that areindependent of any specific test system, and has been constrained to ensure that it can be implemented on automatictest equipment.Keywords: ab
3、breviated, ATLAS, C/ATLAS, common, language, test language, unit under test, UUTThe Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017-2394 USACopyright 1995 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 1995
4、. Printed in the United States of America.ISBN 1-55937-518-3No part of this publication may reproduced in any form, in an electronic retrieval system or otherwise, without theprior written permission of the publisher.IEEE Standards documents are developed within the Technical Committees of the IEEES
5、ocieties and the Standards Coordinating Committees of the IEEE Standards Board. Members ofthe committees serve voluntarily and without compensation. They are not necessarily membersof the Institute. The standards developed within IEEE represent a consensus of the broadexpertise on the subject within
6、 the Institute as well as those activities outside of IEEE that haveexpressed an interest in participating in the development of the standard.Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does notimply that there are no other ways to produce, test, measure, purchase,
7、 market, or provide othergoods and services related to the scope of the IEEE Standard. Furthermore, the viewpointexpressed at the time a standard is approved and issued is subject to change brought aboutthrough developments in the state of the art and comments received from users of the standard.Eve
8、ry IEEE Standard is subjected to review at least every five years for revision or reaffirmation.When a document is more than five years old and has not been reaffirmed, it is reasonable toconclude that its contents, although still of some value, do not wholly reflect the present stateof the art. Use
9、rs are cautioned to check to determine that they have the latest edition of anyIEEE Standard.Comments for revision of IEEE Standards are welcome from any interested party, regardless ofmembership affiliation with IEEE. Suggestions for changes in documents should be in the formof a proposed change of
10、 text, together with appropriate supporting comments.Interpretations: Occasionally questions may arise regarding the meaning of portions of standardsas they relate to specific applications. When the need for interpretations is brought to theattention of IEEE, the Institute will initiate action to pr
11、epare appropriate responses. Since IEEEStandards represent a consensus of all concerned interests, it is important to ensure that anyinterpretation has also received the concurrence of a balance of interests. For this reason IEEEand the members of its technical committees are not able to provide an
12、instant response tointerpretation requests except in those cases where the matter has previously received formalconsideration.Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAIEEE Standa
13、rds documents may involve the use of patented technology. Their apInstitute of Electrical and Electronics Engineers does not mean that using such the purpose of conforming to such standards is authorized by the patent owner.obligation of the user of such technology to obtain all necessary permission
14、s.IEEE Standards documents may involve the use of patented technology. Their approval by theInstitute of Electrical and Electronics Engineers does not mean that using such technology forthe purpose of conforming to such standards is authorized by the patent owner. It is theobligation of the user to
15、such technology to obtain all necessary permissions.IntroductionThis introduction is not part of IEEE Std 716-1995, IEEE Standard Test Language for AllSystemsCommon/Abbreviated Test Language for All Systems (C/ATLAS).IEEE Std 716 (C/ATLAS) originally was a companion language to IEEE Std 416 (ATLAS).
16、This revision of the C/ATLAS standard incorporates 16 separately balloted changes. It wasapproved by the 716 Subcommittee in November, 1993, and by the IEEE Standards Board in1995.C/ATLAS has been conceived as a widely acceptable ATLAS set, with a single and uniqueconstruct to express each language
17、facility selected to support structured programming. Majoremphasis was placed on long-term stability between C/ATLAS updates.This publication represents the culmination of numerous reviews, analyses, and assessments byrepresentatives of the major users of C/ATLAS, as well as representatives of other
18、 corporations.The work was conducted by the IEEE SCC20 ATLAS Committee and its 716 C/ATLASSubcommittee. Major users of C/ATLAS participating in this effort include the United StatesDepartment of Defense, the German Ministry of Defense, the French Ministry of Defense, theUnited Kingdom Ministry of De
19、fense, the Swedish Ministry of Defense, and the airline industryas represented by Aeronautical Radio, Inc.At the time this revised standard was completed, the 716 Subcommittee had the followingmembership:Richard Churcher, ChairGuy Adam Bernd Eichenauer Rolf LundinChristine Augeard Wolf-Dieter Erdman
20、n Michael MartinMichel Bantegnie Horst Ey Jan MeeusenJean-Yves Barbier Anthony Fitzpatrick Goran NordstromEric Bergaud Jacques Flandrois Hans ObermeierMichael Blair Ken Fox Catherine OzenfantPatrice Brard George Gohagan Richard PatrickBarry Burnage Alf Gustafsson Jean PouillyAntonius Bunsen Arthur H
21、ann Brian RaffaelliPaul Charbonnier Joachim Hannemann Johannes RehPatrice Chassard Michael Harrison Albert SansonMichael Cosslett Raymond Heather Helmut ScheibenzuberJames Cottrell Ashley Hulme Bruno SchlechtMichel Courtois Ulla Jacobsson Michael SeaveyBernard Dathy Helmuth Kaunzinger Joseph StancoB
22、ernd Dinklage Sonia Kval Jack TaylorPascal Dormal Michel Lacroix Jacques TeteBernard Dumont Lars Olav Larsson Will YoungiiiReview and comments were contributed by the following individuals:Aldo Bernal Chris Gorringe Harry McGuckinK. Ellis Brian Kett David MorrisChristine Fisher Graham Matchett David
23、 PawsonJohn Goddard Robert RolfeThe following persons were on the balloting committee:Guy Adam Jacques Flandrois Michael MartinMichel Bantegnie John Goddard Robert McGarveyEric Bergaud George Gohagan Neil McKinnonMichael Blair Michael Gooding David MorrisPatrice Brard Chris Gorringe Thomas MurphyAla
24、n Bridges James Graves Goran NordstromRonald Brooks Arnold Greenspan Hans ObermeierAntonius Bunsen Winston Griffin Leslie OrlidgeWilliam Byrnes Alf Gustafsson M. C. OserPaul Charbonnier Arthur Hahn Catherine OzenfantRichard Churcher Damon Hart Richard PatrickFrank Conforti Raymond Hasentab John Pfla
25、zJames Cottrell Robert Hayes Jean PouillyMichel Courtois Raymond Heather Brian RaffaelliRobert Crawford John Heiser Narayanan RamachandranJack Cross Ashley Hulme James ReederBernard Dathy Ulla Jacobsson Robert RolfeWarren DeCamp Gary Jenkins Albert SansonGeorge Diab Helmut Kaunzinger Helmut Scheiben
26、zuberBernd Dinklage Kerry Kugler Michael SeaveyPascal Dormal Michel Lacroix Philip SmithBernard Dumont Lars Olov Larsson Joseph StancoMarcie Emas Fred Liguori William TaylorWolf-Dieter Erdmann Alfred Lowenstein Vince TerpstraHorst Ey Linda Lund Richard WegerAnthony Fitzpatrick Rolf Lundin Kenneth Wi
27、lkinsonChristine Fisher Will YoungivWhen the IEEE Standards Board approved this standard on March 16, 1995, it had the followingmembership:E. G. “Al” Kiener, Chair Donald C. Loughry, Vice ChairAndrew G. Salem, SecretaryGilles A. Baril Richard J. Holleman Marco W. MigliaroClyde R. Camp Jim Isaak Mary
28、 Lou PadgettJoseph A. Cannatelli Ben C. Johnson John W. PopeStephen L. Diamond Sonny Kasturi Arthur K. ReillyHarold E. Epstein Lorraine C. Kevra Gary S. RobinsonDonald C. Fleckenstein Ivor N. Knight Ingo RuschJay Forster* Joseph L. Koepfinger* Chee Kiow TanDonald N. Heirman D. N. “Jim” Logothetis Le
29、onard L. TrippL. Bruce McClung*Member EmeritusAlso included are the following nonvoting IEEE Standards Board liaisons:Satish K. AggarwalRichard B. EngelmanRobert E. HebnerChester C. TaylorStephen J. HuffmanIEEE Standards Project EditorvTable of ContentsCLAUSE PAGE1.0 Scope and purpose . . . . . . .
30、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1 Language processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2 Document control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.0 Referenc
31、e information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.1 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.2 Document precedence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32、 . . . . . . 32.3 Document organization and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.3.1 Extensibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.3.2 Organization of syntax specification . . . . . . . . . . . . . . . . . . . . . . .
33、 . . 32.3.3 Guide to the use of the C/ATLAS language . . . . . . . . . . . . . . . . . . . . 43.0 Complete C/ATLAS test program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.1.1 . . . . . . . . . . . . . . . . . .
34、. . . . . . . . . . . . . . 53.1.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.1.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.2 Basic statement elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2.1 Flag field . . . . . . .
35、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2.2 Statement number field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2.3 Verb field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2.4 Field separator . . . . .
36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2.5 Remainder of statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.2.6 Statement terminator ($) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.0 Structure delimiter statements . .
37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.1 BEGIN/TERMINATE statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.1.1 BEGIN, ATLAS PROGRAM statement . . . . . . . . . . . . . . . . . . . . . . 94.1.2 TERMINATE, ATLAS PROGRAM statement . . . . .
38、 . . . . . . . . . . . . 94.1.3 BEGIN, ATLAS MODULE statement . . . . . . . . . . . . . . . . . . . . . . 104.1.4 TERMINATE, ATLAS MODULE statement . . . . . . . . . . . . . . . . . . 115.0 Reserved for future use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
39、6.0 Preamble statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136.1 Main preamble structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136.1.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136.1.2 . . . . . . .
40、. . . . . . . . . . . . . . . . . . . . . 146.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156.3 DECLARE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166.4 DEFINE statements definition . . . . . . . . . . . . . . . . . . . . . . . .
41、 . . . . . . . . 276.5 DEFINE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28viCLAUSE PAGE6.6 PROCEDURE definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326.6.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326.6.2 DEFINE P
42、ROCEDURE statement . . . . . . . . . . . . . . . . . . . . . . . . . 336.6.3 PROCEDURE body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346.6.4 LEAVE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . 356.6.5 END PROCEDURE statement . . . . . . . . . . . . . . .
43、. . . . . . . . . . . . 366.7 REQUIRE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366.8 INCLUDE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416.9 IDENTIFY statements . . . . . . . . . . . . . . . . . . . . . . .
44、. . . . . . . . . . . . . . . 426.10 IDENTIFY TIMER statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436.11 IDENTIFY SIGNAL BASED EVENT statement . . . . . . . . . . . . . . . . . . . . 436.12 IDENTIFY EVENT BASED EVENT statement . . . . . . . . . . . . . . . . . . . . . 4
45、66.13 IDENTIFY EVENT INTERVAL statement . . . . . . . . . . . . . . . . . . . . . . . . 476.14 IDENTIFY EVENT INDICATOR statement . . . . . . . . . . . . . . . . . . . . . . . 496.15 IDENTIFY TIME BASED EVENT statement . . . . . . . . . . . . . . . . . . . . . . 506.16 DIGITAL CONFIGURATION definiti
46、on . . . . . . . . . . . . . . . . . . . . . . . . . 506.16.1 . . . . . . . . . . . . . . . . . . . . . . 506.16.2 DEFINE DIGITAL CONFIGURATION statement . . . . . . . . . . . . . . 516.16.3 DEFINE DIGITAL SOURCE statement . . . . . . . . . . . . . . . . . . . . . 526.16.4 DEFINE DIGITAL SENSOR stat
47、ement . . . . . . . . . . . . . . . . . . . . . 616.16.5 END DIGITAL CONFIGURATION statement . . . . . . . . . . . . . . . . . 666.17 EXTEND statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 676.18 ESTABLISH PROTOCOL statement . . . . . . . . . . . . . . . . . .
48、 . . . . . . . . . . 736.19 DEFINE EXCHANGE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 806.20 DEFINE DIGITAL TIMING statement . . . . . . . . . . . . . . . . . . . . . . . . . . . 846.21 COMPLEX SIGNAL definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49、. 866.21.1 DEFINE COMPLEX SIGNAL structure . . . . . . . . . . . . . . . . . . . . . 866.21.2 DEFINE COMPLEX SIGNAL statement . . . . . . . . . . . . . . . . . . . . 926.21.3 SPECIFY COMPLEX SIGNAL CHARACTERISTICS statement . . . 926.21.4 SPECIFY COMPLEX FUNCTION statement . . . . . . . . . . . . . . . . . 936.21.5 SPECIFY COMPONENT SIGNAL statement . . . . . . . . . . . . . . . . . 976.21.6 SPECIFY SIGNAL CONDITIONING statement . . . . . . . . . . . . . . . 986.21.7 END COMPLEX SIGNAL statement . . . . . . . . . . . . . . . . . . . . . . . 1006.22 DEFINE EXCHANGE-CONFIGURATION s
