1、 IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules Sponsored by the Standards Development Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Electromagnetic Compatibility Society IEEE Std 1688-2015 IEEE Std 1688-20
2、15 IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules Sponsor Standards Development Committee of the IEEE Electromagnetic Compatibility Society Approved 11 June 2015 IEEE-SA Standards Board Abstract: Electromagnetic performanc
3、e requirements for replaceable electronic modules (REMs) are specified. This standard is suitable for items that have the following features: removable/replaceable electronic circuit modules that plug into an equipment rack or frame, with electrical interconnections primarily through edge connectors
4、 that interface directly with a backplane, and electrical power input derived from the backplane power sources. This standard is based on MIL-STD-461E system/equipment level electromagnetic interference (EMI) controls. The conducted and radiated requirements, limits, and test methods were adapted to
5、 provide risk reduction of REM EMI before integration in a system/equipment. Keywords: electromagnetic compatibility, electromagnetic emission, electromagnetic interference, electromagnetic susceptibility, electrostatic discharge, EMC, EMI, ESD, IEEE 1688, REM, replaceable electronic module, test li
6、mits The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 30 September 2016. Printed in the United States of America. IEEE is a registered t
7、rademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS”
8、and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint exp
9、ressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services
10、for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances o
11、r, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GO
12、ODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISE
13、D OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be cons
14、idered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to
15、be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of
16、 IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in doc
17、uments should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this r
18、eason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any per
19、son who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Stan
20、dards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory
21、requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright la
22、ws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these document
23、s available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for c
24、ompany or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard
25、 for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time th
26、rough the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a docu
27、ment is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard
28、. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/Xplore/home.jsp or contact IEEE at the address listed previously. For more informa
29、tion about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged t
30、o check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any
31、 patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whe
32、ther the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may ex
33、ist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions pr
34、ovided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely t
35、heir own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2016 IEEE. All rights reserved. 6 Participants At the time this IEEE standard was completed, the Replaceable Electronic Module Working Group had the following membership: Frederick Heather, Ch
36、air Kanaiya Mahendra, Vice Chair Dennis Barberi Stu Benner Robert Berkovitz John Birkland Ron Brewer David Brumbaugh Joe Calabria Paul Emery H. R. (Bob) Hofmann Doug Howard Howard Jordan Matt Juszczyk Cathy Lewis Fin OConnor Jack Parwica Beverly Persons Kermit Phipps Jacques Rollin Jack Sargeant Noe
37、l Sargent Walter Scott Dale Svetanoff Donald Sweeney Joe Tannehill Tesfahunei Tecle Richard Worley The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Bill Brown William Bush Suresh Channarasappa Keith
38、 Chow Ernest Duckworth Alistair Duffy Randall Groves Donald Heirman Werner Hoelzl Daniel Hoolihan Sergiu Iordanescu Yuri Khersonsky Chad Kiger Joseph L. Koepfinger George Kyle Arthur H. Light Greg Luri Edward Mccall Michael Newman Charles Ngethe David Nichols Bansi Patel Ronald Petersen Ghery Pettit
39、 Michael Roberts Jack Sargeant Bartien Sayogo Thomas Starai Walter Struppler Donald Sweeney Shinji Tanabe David Tarrant Thomas Tullia John Vergis Barry Wallen Daidi ZhongWhen the IEEE-SA Standards Board approved this standard on 11 June 2015, it had the following membership: John Kulick, Chair Jon W
40、alter Rosdahl, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Phillippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David J. Law Hung Ling Oleg Logvinov Ted Olsen Glenn Parsons
41、 Ron Peterson Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Copyright 2016 IEEE. All rights reserved. 7 Introduction This introduction is not part of IEEE Std 1688-2015, IEEE Standard Requirements for the Control of Electromagnetic Interference Chara
42、cteristics of Replaceable Electronic Modules. This standard is for use in the specification of electromagnetic performance requirements for replaceable electronic modules (REMs). This standard has been developed in response to changes in the technology used to implement functions and/or subsystems i
43、nto larger, more complicated integrated systems. The architecture for complex systems and system platforms has evolved in recent years from a collective of stand-alone federated subsystems that each performs a set of functions to a highly integrated rack system that incorporate a backplane and multi
44、ple subordinate modules that perform the required functions. Some of the modules are designed for a particular purpose, such as power supply or power distribution, whereas others will provide maximum flexibility by being programmable to perform one or more functions. These modules have become items
45、that are often procured independently from the system rack or frame in which they are designed to reside. For this reason, the module specification requirements have also had to mature to include not only descriptions of the functionality and interfaces required but also operational environment cond
46、itions. This standard addresses the module electromagnetic environments, by way of adaptation of the test requirements of MIL-STD-461E.1Since MIL-STD-461E is intended for use with electronic systems or subsystems, it is not appropriate to apply that standard directly to REMs. However, many of the en
47、vironments simulated by MIL-STD-461E tests are relevant for REMs and have been used as the basis for the tests described in this standard. Beneficial comments (recommendations, additions, and deletions) and any pertinent data that may be of use in improving this document should be addressed to: IEEE
48、, Electromagnetic Compatibility (EMC) Society, Standards Development Committee, PAR-1688 Working Group. The stated requirements are considered necessary to provide reasonable confidence that a particular REM that complies with these requirements will function within its designated design tolerances
49、when within the electromagnetic operating environment of a designated rack, frame, enclosure, or modular system. The procuring activity should consider tailoring the individual requirements to be more or less severe based on the design features of the intended rack host and its mission in concert with personnel knowledgeable about electromagnetic compatibility issues affecting platform integration. An annex is included that provides the rationale and background for each requirement and verification section. A committee consisting of representatives of government and industry pr