1、 Copyright 2007 IEEE. All rights reserved.1ISO/IEC 14764, 2006(E)IEEE Std 14764-2006(Revision of IEEE Std 1219-1988)Secretariat: Standards Council of CanadaDate 2005-06-29Corrections toStandard for Software EngineeringSoftware Life Cycle ProcessesMaintenanceNorme pour ingnierie du logiciel Processus
2、 de cycle de vie du logiciel MaintenanceSponsorSoftware & Systems Engineering Standards Committee of the IEEE Computer SocietyCorrection SheetIssued 15 December 2007Copyright 2007 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 2007. Printed in the United
3、 States of America.This correction sheet may be freely reproduced and distributed in order to maintainthe utility and currency of the underlying Standard. This correction sheet may notbe sold, licensed, or otherwise distributed for any commercial puposes whatsoever.The content of this correction she
4、et may not be modified.CORRECTIONS TO ISO/IEC 14764: 2006(E) IEEE Std 14764-20062Copyright 2007 IEEE. All rights reserved.5.1 Process ImplementationChange this subclause as follows:During Process Implementation, the maintainer establishes the plans and procedures which that are to beexecuted during
5、the Maintenance Process. The Maintenance Plan (see subclause 8.3.2 7.3.2 of this Interna-tional Standard) should be developed in parallel with the Development Plan. The maintainer should alsoestablish needed organizational interfaces during this activity.6.7 Early involvement in developmentChange th
6、e last paragraph as follows:Planning is discussed in detail in subclause 8.3 7.3 of this International Standard. Early involvement inprojects by the maintainer can help in stating, establishing, and clarifying the maintainability requirementsof the software. ISO/IEC 9126 should be used to explicitly
7、 define maintainability and other software qualitycharacteristics. Maintainability can be improved by maintainer participation in the quality assurance, verifi-cation, and validation supporting life cycle processes of ISO/IEC 12207. The maintainer should: 6.8.1 Maintainability and the development pr
8、ocessChange the last paragraph as follows:A software maintenance strategy should also be established prior to design. Early maintainer involvement ina software project has the potential to reduce maintenance costs. There are many actions, including softwaremaintenance planning, to be performed durin
9、g the development process. These actions should be docu-mented in the maintenance plan (subclause 8.3.2 7.3.2 of this International Standard).CORRECTIONS TO ISO/IEC 14764: 2006(E) IEEE Std 14764-2006Copyright 2007 IEEE. All rights reserved.3Annex A(informative) Cross-reference between ISO/IEC/IEEE 1
10、4764 andISO/IEC 12207 and ISO/IEC 12207 Amd 1Change the table in Annex A as follows:Clause in ISO/IEC/IEEE 14764 Clause in ISO/IEC 12207Clause in ISO/IEC 12207, Amd 11.2 1.24.2 3.2 3.55.1 4.1 4.1.1.1/4.1.1.2/ 4.1.1.3F.3.4/F.3.4.2 6 5 5.56.1 5.1 5.5.16.1.2.1 5.1.2.1 5.5.1.16.1.2.2 5.1.2.2 5.5.1.26.1.
11、2.3 5.1.2.3 5.5.1.36.1.3 5.1.3 6.66.2 5.2 5.5.26.2.2.1 5.2.2.1 5.5.2.1 F.1.56.2.2.2 5.2.2.2 5.5.2.26.2.2.3 5.2.2.3 5.5.2.36.2.2.4 5.2.2.4 5.5.2.4 F.1.56.2.2.5 5.2.2.5 5.5.2.56.2.3 5.2.3 6.66.3 5.3 5.5.36.3.2.1 5.3.2.1 5.5.3.16.3.2.2 5.3.2.2 5.3/5.5.3.2 F.1.3/F.1.3.1F.1.3.11 6.3.3 5.3.3 6.66.4 5.4 5.
12、5.46.4.2.1 5.4.2.1 5.5.4.16.4.2.2 5.4.2.2 5.5.4.2 F.3.4CORRECTIONS TO ISO/IEC 14764: 2006(E) IEEE Std 14764-20064Copyright 2007 IEEE. All rights reserved.6.4.3 5.4.3 6.66.5 5.5 5.5.56.5.2 5.5.2 5.5.5.4 F.3.46.5.2.1 5.5.2.1 5.5.5.16.5.2.2 5.5.2.2 5.5.5.2 F.1.56.5.2.3 5.5.2.3 5.5.5.36.5.2.4 5.5.2.4 5.
13、5.5.4 F.1.5/F.3.46.5.2.5 5.5.2.5 5.5.5.56.5.2.6 5.5.2.6 5.5.5.66.5.2.7 5.5.2.7 5.5.5.76.5.3 5.5.3 6.66.5.4 5.5.4 5.5.5.4 F.3.46.6 5.6 5.5.66.6.2.1 5.6.2.1 5.5.6.1 F.1.56.6.2.2 5.6.2.2 5.5.6.26.6.2.3 5.6.2.3 5.5.6.3 F.1.5/F.3.46.6.2.4 5.6.2.4 5.5.6.46.6.2.5 5.6.2.5 5.5.6.56.6.3 5.6.3 6.67.1 6.1 5.5/6.2/6.8 F.1.57.3 6.3 5.1.37.5 6.5 F.3.1.68.1 7.1 5.5.1.1 F.1.58.2.1 7.2.1 5.5.1.1 F.3.4.28.2.3 7.2.3 5.1/5.28.2.4 7.2.4 5.5.1.1 F.3.4.2 8.3.3 7.3.3 5.5.1.1 F.3.4Clause in ISO/IEC/IEEE 14764 Clause in ISO/IEC 12207Clause in ISO/IEC 12207, Amd 1
