1、IEEE Std 1217-2001IEEE StandardsIEEE Guide for PreservativeTreatment of Wood Distribution andTransmission Line StructuresPublished by The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USA22 October 2001IEEE Power Engineering SocietySponsored by theTra
2、nsmission and Distribution CommitteeIEEE StandardsPrint: SH94943PDF: SS94943Authorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York,
3、NY 10016-5997, USACopyright 2001 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 22 October 2001. Printed in the United States of America.Print: ISBN 0-7381-2932-1 SH94943PDF: ISBN 0-7381-2933-X SS94943No part of this publication may be reproduced in any
4、form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.IEEE Std 1217-2001(R2009)IEEE Guide for Preservative Treatment of Wood Distribution and Transmission Line StructuresSponsorTransmission and Distribution Committeeof theIEEE Power Engineering S
5、ocietyReaffirmed 9 December 2009Approved 14 June 2001IEEE-SA Standards BoardAbstract: This guide discusses the preservative treatment of both distribution and transmissionwood poles. The guide includes definitions, descriptions of equipment, methods of treatment,information about preservatives, and
6、preparation and specifications for treatment.Keywords: overhead distribution lines, overhead transmission lines, preservative treatment, wooddistribution structures, wood transmission structuresAuthorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from
7、 IEEE Xplore. Restrictions apply. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop-ment process, approved by the American
8、National Standards Institute, which brings together volunteers representing variedviewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve with-out compensation. While the IEEE administers the process and establishes rules to promote fa
9、irness in the consensus devel-opment process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information containedin its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other dam-age, of an
10、y nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resultingfrom the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, an
11、d expressly disclaimsany express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard
12、 does not imply that there are no other ways to produce, test, measure, purchase, market,or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through develop
13、ments in the state of the art andcomments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revi-sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to concludethat its contents,
14、although still of some value, do not wholly reflect the present state of the art. Users are cautioned to checkto determine that they have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other servicesfo
15、r, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person orentity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com-petent professional in determining the exercise of reasonable
16、 care in any given circumstances.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specificapplications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepareappropriate re
17、sponses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that anyinterpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Committees are not able to provid
18、e an instant response to interpretation requestsexcept in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation withIEEE. Suggestions for changes in documents shou
19、ld be in the form of a proposed change of text, together with appropriatesupporting comments. Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854USAAuthorization to photocopy portions of any individual stan
20、dard for internal or personal use is granted by the Institute ofElectrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive
21、,Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementation of this standard may require use of subject ma
22、t-ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence orvalidity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patentsfor which a license may be required by an IEEE standard or for conduct
23、ing inquiries into the legal validity orscope of those patents that are brought to its attention.Authorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. Copyright 2001 IEEE. All rights reserved. iiiIntroduction(This
24、introduction is not part of IEEE Std 1217-2001, IEEE Guide for Preservative Treatment of Wood Distribution andTransmission Line Structures.)The most common material used for the construction of distribution and transmission lines, especially in the 69kVthrough 345 kV range, is wood. In order to prot
25、ect wood from decay and insects, it must be treated with preservatives.There are several different types of preservatives and different methods of treatment. This guide provides the engineerwith technical information on preservatives and how to properly specify them when purchasing preservative trea
26、tedwood poles and crossarms.At the time this guide was being drafted, the IEEE Wood Structure Working Group had the followingparticipants and/or contributors:Robert C. Peters, ChairThe following members of the balloting committee voted on this standard. Balloters may have voted forapproval, disappro
27、val, or abstention.Oscar C. AmrhynNelson G. Bingel, IIIGary BoosTom BozemanMichael BrucatoBill CalhounSam ClutsLen ConsalvoGlen DavidsonFrank DenbrockEd DziedzicDale EasleyWilliam G. EisingerJames S. GrahamGeorge GreenJerome G. HansonSteve HarrisonDonald G. HealdRichard W. HenselBruce HessMagdi F. I
28、shacNunnally JohnsonBob KlugeSamy KrishnasamyHong-To LamJim LarkeyRobert LashRobert LathamArny MilbrightRussell C. MoodyHarry W. NgDean OskvigOrville J. PlumJoe PohlmanSteve PowellPatrick D. QuinnKaren RoweSteve SmithAndrew H. StewartNevins H. WilburnJames E. ApplequistNelson G. BingelGernot K. Bran
29、dtJoseph F. BuchJames F. ChristensenF. Leonard ConsalvoGlenn A. DavidsonFrank A. DenbrockNicholas J. DeSantisJon M. FergusonFrank FerracaneEdwin J. GoodwinJerome G. HansonRichard W. HenselMagdi F. IshacRalph O. JonesGeorge G. KaradyLeon KempnerRobert O. KlugeDonald E. KoonceDaleep C. MohlaYakov Motl
30、isGeorge B. NilesRobert G. OswaldRobert C. PetersOrville J. PlumPatrick D. QuinnRon RandleDonald R. RuthmanDonald SandellNeil P. SchmidtStephen F. SmithDaniel J. WardAuthorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions a
31、pply. iv Copyright 2001 IEEE. All rights reserved.When the IEEE-SA Standards Board approved this standard on 14 June 2001, it had the followingmembership:Donald N. Heirman, ChairJames T. Carlo, Vice ChairJudith Gorman, Secretary*Member EmeritusAlso included is the following nonvoting IEEE-SA Standar
32、ds Board liaison:Alan Cookson, NIST RepresentativeDonald R. Volzka, TAB RepresentativeJennifer McClain LongmanIEEE Standards Project EditorSatish K. AggarwalMark D. BowmanGary R. EngmannHarold E. EpsteinH. Landis FloydJay Forster*Howard M. FrazierRuben D. GarzonJames H. GurneyRichard J. HollemanLowe
33、ll G. JohnsonRobert J. KennellyJoseph L. Koepfinger*Peter H. LipsL. Bruce McClungDaleep C. MohlaJames W. MooreRobert F. MunznerRonald C. PetersenGerald H. PetersonJohn B. PoseyGary S. RobinsonAkio TojoDonald W. ZipseAuthorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,201
34、0 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. Copyright 2001 IEEE. All rights reserved. vContents1. Overview 11.1 Scope 11.2 Purpose. 12. References 13. Definitions . 24. Wood preservation by pressure process and thermal process 34.1 Pressure process. 34.2 Thermal process. 54.3 Wood preser
35、vatives 55. Preparation for treatment . 85.1 Peeling . 85.2 Incising and boring 85.3 Conditioning prior to treatment . 96. Specifications for treatment . 107. Inspection and quality control 12Annex A (informative) Bibliography 13Authorized licensed use limited to: IHS Stephanie Dejesus. Downloaded o
36、n June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. Authorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. Copyright 2001 IEEE. All rights reserved. 1IEEE Guide for Preservative Treatment of Wood Di
37、stribution and Transmission Line Structures1. OverviewWood is one of the most common structural materials used in the U.S. for distribution and high-voltagetransmission structures. To date, there has been limited guidance to the design engineer on preservativesystems and treatment methods used for w
38、ood structures.Wood can be protected from the attack of decay fungi, harmful insects, or marine borers by properapplication of selected wood preservatives. Obtaining prolonged service life of treated wood utility productsrequires careful control of all aspects of the conditioning and treating proces
39、s. Effective treatment willsignificantly increase the service life of wood structures.1.1 ScopeThis guide is intended to provide practical information to be used in conjunction with technical informationprovided in the AWPA 2001 Book of Standards,1ANSI 05.1-1992 (for wood poles), ANSI 05.2-1989 (for
40、wood products such as structural glued laminated timber for utility structures), and ANSI 05.3-1989 (forwood products such as solid sawn wood crossarms and braces). These voluntary product standards are usedworldwide and are modified as necessary by users for their specific needs. 1.2 PurposeThe pur
41、pose of this guide is to provide the design engineer with information on treatment of wood poles andcrossarms for distribution and overhead transmission lines.2. ReferencesThis guide shall be used in conjunction with the following publications. When the following standards aresuperseded by an approv
42、ed revision, the revision shall apply.1Information on references can be found in Clause 2.Authorized licensed use limited to: IHS Stephanie Dejesus. Downloaded on June 16,2010 at 16:53:07 UTC from IEEE Xplore. Restrictions apply. IEEE Std 1217-2001 IEEE GUIDE FOR PRESERVATIVE TREATMENT OF 2 Copyrigh
43、t 2001 IEEE. All rights reserved.American Wood-Preservers Association (AWPA) Book of Standards, 2001.2ANSI 05.1-1992, American National Standard Specifications and Dimensions for Wood Poles.3ANSI 05.2-1989, American National Standard Specifications for Structural Glued Laminated Timber forUtility St
44、ructures.ANSI 05.3-1989, American National Standard for Solid Sawn Wood Crossarms and BracesSpecificationsand Dimensions.Federal Specification TT-W-571 (1977), Wood Preservation Treating Practices 1997.4Rural Utilities Service (RUS) Bulletin 1728F-700, RUS Specification for Wood Poles, Stubs and Anc
45、horLogs, September 1993.53. DefinitionsFor the purposes of this guide, the following terms and definitions apply. The IEEE 100, The AuthoritativeDictionary of IEEE Standards Terms, Seventh Edition B5 should be referenced for terms not defined inthis clause.3.1 carrier: Medium that is used to carry t
46、he preservative into the wood.3.2 empty-cell process: Treating process where air pressure is used to force excess preservative out of thewood at the end of the process.3.3 full-cell process: Treating process where preservative is forced by pressure into the wood.3.4 fungi: Organisms that can decay w
47、ood.3.5 Lowry: A specific type of empty-cell treating process.3.6 oilborne: Dissolved in oil.3.7 pressure treatment: Preservative treatment where wood is placed in a pressure vessel and preservativeis forced into the wood.3.8 seasoned: Term used for wood that has the moisture content reduced enough
48、to receive preservativetreatment.3.9 thermal treatment: Preservative treatment in open tanks where temperature differential causespreservative movement into wood.3.10 treating cylinder: Cylindrical pressure vessel used in the treating process, ranging in length to over36 m.63.11 waterborne: Dissolve
49、d in water.2AWPA publications are available from the American Wood-Preservers Association, P.O. Box 5690, Granbury, TX 76049, USA(http:/).3ANSI publications are available from the Sales Department, American National Standards Institute, 25 West 43rd Street, 4th Floor, New York, NY 10036, USA (http:/www.ansi.org/).4Federal Specification TT-W-571 has been superceded by the AWPA 2001 Book of Standards, however, copies can be obtained fromGlobal Engineering, 15 Inverness Way East, Englewood, CO 80112-5704, USA, tel. (303) 792-2181 (http:/ Uti
