1、 IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility Sponsored by the Substations Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 1127-2013 (Revision of IEEE Std
2、1127-1998) IEEE Std 1127-2013 (Revision of IEEE Std 1127-1998) IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility Sponsor Substations Committee of the IEEE Power and Energy Society Approved 11 December 2013 IE
3、EE-SA Standards Board Acknowledgements Table 2 of this standard is printed with permission from BBN Corporation. Abstract: Significant community acceptance and environmental compatibility items to be considered during the planning and design phases, the construction period, and the operation of elec
4、tric supply substations are identified, and ways to address these concerns to obtain community acceptance and environmental compatibility are documented. On-site generation and telecommunication facilities are not considered. Keywords: A-weighted sound level, commercial zone, community involvement,
5、hazardous material, IEEE 1127, industrial zone, noise, permitting process, residential zone, wetlands The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reser
6、ved. Published 24 January 2014. Printed in the United States of America. IEEE, National Electrical Safety Code, and NESC are registered trademarks in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In ad
7、dition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test
8、, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from us
9、ers of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEE
10、E Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR A
11、NY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
12、 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review
13、 of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operatio
14、ns Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standar
15、ds shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IE
16、EE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned
17、interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in
18、those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted t
19、o the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any
20、 applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may no
21、t be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulati
22、ons, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to pay
23、ment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
24、 Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents
25、 should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together w
26、ith any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not who
27、lly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata,
28、 visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standa
29、rds can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter
30、covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the
31、statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and condi
32、tions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be requir
33、ed, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standa
34、rd are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the Co
35、mmunity Acceptance Working Group had the following membership: Diane Watkins, Chair Joseph Gravelle, Vice Chair Michael Chavis W. Bruce Dietzman Alan Gaetz Charles Haahr David Harris Charles McShane Donnie Moreau Mike Noori John Randolph Hamid Sharifnia James Sosinski The following members of the in
36、dividual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Ali Al Awazi Thomas Barnes W. J. (Bill) Bergman Wallace Binder Michael Bio William Byrd Thomas Callsen Robert Christman Randy Clelland Ray Davis W. Bruce Dietzman Gary Donner David Gi
37、egel Jalal Gohari James Graham Joseph Gravelle Randall C. Groves Charles Haahr Charles Hand David Harris Lee Herron Gary Heuston Gael Kennedy Yuri Khersonsky James Kinney Hermann Koch Jim Kulchisky Saumen Kundu Chung-Yiu Lam Benjamin Lanz Debra Longtin Jorge Marquez Charles McShane Daleep Mohla Geor
38、ges Montillet Donnie Moreau Kimberly Mosley Jerry Murphy Michael Newman Joe Nims Gearoid OhEidhin Lorraine Padden Thomas Proios Moises Ramos John Randolph Michael Roberts Anne-Ma Sahazizian Bartien Sayogo Hamid Sharifnia Devki Sharma David Singleton James Smith Jerry Smith John Spare Gary Stoedter M
39、ichael Swearingen Malcolm Thaden John Toth John Vergis Jane Verner Diane Watkins Yingli Wen Donald Wengerter Kenneth White Jonathan Woodworth Roland Youngberg Luis Zambrano Daidi Zhong Copyright 2014 IEEE. All rights reserved. viWhen the IEEE-SA Standards Board approved this guide on 11 December 201
40、3, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Micha
41、el Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael J
42、anezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Standards Program Manager, Technical Program Development Copyright 2014 IEEE. All rights reserved. viiIntroduction This introduction is not part of IEEE Std 1127-2013, IEEE Guide for the De
43、sign, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility. IEEE Std 1127-2013 was revised by members of Working Group E1 and is under the sponsorship of the Transmission and Distribution Substations Operations Subcommittee of the Substat
44、ions Committee of the IEEE Power and Energy Society. This guide provides guidance and information to substation engineers on factors to consider for the public acceptance and environmental compatibility of electric substations. Major changes in this revision include reformatting of the document so t
45、hat community involvement is discussed under each phase of project development instead of a stand-alone clause. The site-selection clause (Clause 4) has also been significantly expanded. Finally, a separate design clause (Clause 6) has been added. Copyright 2014 IEEE. All rights reserved. viiiConten
46、ts 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 1.3 Organization 2 2. Normative references 2 3. Definitions 2 4. Site selection. 3 4.1 General 3 4.2 Community considerations 9 5. Permits 10 5.1 General 10 5.2 Public involvement 12 6. Design. 12 6.1 Aesthetics 12 6.2 Noise 17 6.3 Electric and magnetic f
47、ields. 26 6.4 Environmental considerations . 30 7. Construction . 30 7.1 Site preparation 30 7.2 Noise 32 7.3 Physical site security . 32 7.4 Traffic control 32 7.5 Site housekeeping 33 7.6 Hazardous material 33 7.7 Oil containment . 33 7.8 Community involvement . 33 8. Operations and maintenance. 3
48、4 8.1 Site housekeeping 34 8.2 Noise 35 8.3 Physical site security . 35 8.4 Fire protection 35 8.5 Hazardous material 36 Annex A (informative) Bibliography . 37 Copyright 2014 IEEE. All rights reserved. ixIEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Commun
49、ity Acceptance and Environmental Compatibility IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and dis