1、The Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017-2394, USACopyright 1998 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 18 December 1998. Printed in the United States of America.Print: ISBN 0-7381-1449-9
2、 SH94691PDF: ISBN 0-7381-1450-2 SS94691No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.IEEE Std 1101.1-1998 (R2008)(Revision ofIEEE Std 1101-1991)IEEE Standard for Mechanical Core Specifi
3、cations for Microcomputers Using IEC 60603-2 ConnectorsSponsorMicroprocessor and Microcomputer Standards Subcommitteeof theIEEE Computer SocietyReaffirmed 31 January 2008Approved 30 September 1998IEEE-SA Standards BoardAbstract: The basic dimensions of a range of modular subracks conforming to IEC 6
4、0297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) andANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units,printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensuremech
5、anical function compatibility are provided. This standard offers total system integration guide-lines with attendant advantages, such as reduction in design and development time, manufacturingcost savings, and distinct marketing advantages.Keywords: compatibility, mechanical interchangeability, plug
6、-in units, subracksIEEE Standardsdocuments are developed within the IEEE Societies and the Standards Coordinat-ing Committees of the IEEE Standards Association (IEEE-SA) Standards Board. Members of thecommittees serve voluntarily and without compensation. They are not necessarily members of theInsti
7、tute. The standards developed within IEEE represent a consensus of the broad expertise on thesubject within the Institute as well as those activities outside of IEEE that have expressed an inter-est in participating in the development of the standard.Use of an IEEE Standard is wholly voluntary. The
8、existence of an IEEE Standard does not implythat there are no other ways to produce, test, measure, purchase, market, or provide other goods andservices related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change b
9、rought about through developments inthe state of the art and comments received from users of the standard. Every IEEE Standard is sub-jected to review at least every ve years for revision or reafrmation. When a document is morethan ve years old and has not been reafrmed, it is reasonable to conclude
10、 that its contents,although still of some value, do not wholly reect the present state of the art. Users are cautioned tocheck to determine that they have the latest edition of any IEEE Standard.Comments for revision of IEEE Standards are welcome from any interested party, regardless ofmembership af
11、liation with IEEE. Suggestions for changes in documents should be in the form of aproposed change of text, together with appropriate supporting comments.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards asthey relate to specic applications. When the nee
12、d for interpretations is brought to the attention ofIEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards rep-resent a consensus of all concerned interests, it is important to ensure that any interpretation hasalso received the concurrence of a balance of in
13、terests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Committees are not able to provide an instant response tointerpretation requests except in those cases where the matter has previously received formalconsideration. Comments on standards and requests for interp
14、retations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAAuthorization to photocopy portions of any individual standard for internal or personal use isgranted by the Institute of Electrical and Electronics Engineers, Inc., provided that
15、 the appropriatefee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contactCopyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA;(978) 750-8400. Permission to photocopy portions of any individual standard for educational class-
16、room use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementation of this standard mayrequire use of subject matter covered by patent rights. By publication of this standard,no position is taken with respect to the existence or vali
17、dity of any patent rights inconnection therewith. The IEEE shall not be responsible for identifying patents forwhich a license may be required by an IEEE standard or for conducting inquiries intothe legal validity or scope of those patents that are brought to its attention.Copyright 1998 IEEE. All r
18、ights reserved.iiiIntroduction(This introduction is not a part of IEEE Std 1101.1-1998, IEEE Standard for Mechanical Core Specications for Micro-computers Using IEC 60603-2 Connectors.)With the introduction of international (IEC) microcomputer architectures based on the Euroboard form fac-tor, the I
19、EEE Computer Society Technical Committee on Microprocessors and Microcomputers found itappropriate to form a separate IEEE standard to expand upon the IEC 60297 series of standards, Dimensionsof mechanical structures of the 482.6 mm (19 in) series. (See Clause 3 of this standard.)This standard provi
20、des design engineers with the dimensions and tolerances necessary to ensure mechanicalfunction compatibility. This standard also provides environmental specications as an addendum to IEC60297-3 (1984-01).This mechanical standard offers total system integration guidelines. It offers advantages such a
21、s reduction indesign and development time, manufacturing cost savings, and distinct marketing advantages.This standard covers standardized dimensions of a range of modular subracks and a compatible range ofplug-in units, printed boards, backplanes, and connectors.This standard was revised from IEEE
22、Std 1101.1-1991.At the time that the revision was completed, the P1101.1 Working Group had the following membership:Eike Waltz,ChairFrank Hom, Secretary The following persons were on the balloting committee that approved this document for submission to theIEEE-SA Standards Board:Ralf BehrensMartin B
23、lakeRobert DowningJean-Jacques DumontWayne P. FischerTad KubicPaul MazuraMichael MunroeJoe P. NorrisElwood T. ParsonsHolly ShernskyMichael G. ThompsonSue WongGhassan A. AbbasMalcolm J. AirstRay S. AldermanKeith D. AnthonyEdmund H. BaulsirMartin BlakeRalf BokaemperDavid BrearleyCharles BrillC. H. Che
24、nJean-Jacques DumontJean Paul EmardWayne P. FischerKenneth C. HeckRoger HinsdaleFrank HomJing KwokConrad A. LaurvickGerald E. LawsRollins LinserGary S. ManchesterJoseph R. MarshallThanos MentzelopoulosGene E. MilliganKlaus-Dieter MuellerMichael MunroeJoe P. NorrisPeter G. OdellElwood T. ParsonsHerma
25、nn H. StrassMichael G. ThompsonRobert C. TripiBruce WallaceDavid L. WrightivCopyright 1998 IEEE. All rights reserved.The nal conditions for approval of this standard were met on 28 September 1998. This standard was condi-tionally approved by the IEEE-SA Standards Board on 16 September 1998, with the
26、 following membership:Richard J. Holleman,ChairDonald N. Heirman,Vice ChairJudith Gorman,Secretary*Member EmeritusCatherine BergerIEEE Standards Project EditorSatish K. AggarwalClyde R. CampJames T. CarloGary R. EngmannHarold E. EpsteinJay Forster*Thomas F. GarrityRuben D. GarzonJames H. GurneyJim D
27、. IsaakLowell G. JohnsonRobert KennellyE. G. Al KienerJoseph L. Koepnger*Stephen R. LambertJim LogothetisDonald C. LoughryL. Bruce McClungLouis-Franois PauRonald C. PetersenGerald H. PetersonJohn B. PoseyGary S. RobinsonHans E. WeinrichDonald W. ZipseCopyright 1998 IEEE. All rights reserved.vContent
28、s1. Scope 11.1 Basic dimensions of subracks 11.2 Dimensions of plug-in units. 11.3 Environmental requirements of subracks. 12. Purpose. 13. References 14. General arrangement 35. Euroboard matrix . 46. Euroboard sizes 56.1 Euroboard height 56.2 Euroboard depth. 56.3 Euroboard thickness. 56.4 Conduct
29、ive elements and guide rails . 57. Position of plug-in unit mounted connectors, board-type and box-type 98. Plug-in unit description 129. Plug-in unit dimensions . 129.1 Board-type plug-in units 129.2 Box-type, box/board-type plug-in units. 1210. Backplane design and mounting positions. 1310.1 Rigid
30、ity 1310.2 Dimensions 1311. Subracks. 3412. Environmental specifications. 4212.1 Introduction 4212.2 Climatic tests 4212.3 Mechanical load. 4212.4 Vibration 4412.5 Shock 4412.6 Safety tests . 44Annex A (informative) Bibliography 47Copyright 1998 IEEE. All rights reserved.1IEEE Standard for Mechanica
31、l Core Specications for Microcomputers Using IEC 60603-2 Connectors1. Scope1.1 Basic dimensions of subracksThis standard covers the basic dimensions of a range of modular subracks conforming to IEC 60297-3(1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09
32、) andANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printedboards, and backplanes.1.2 Dimensions of plug-in unitsThis standard will give the dimensions of associated plug-in units and connector-mounting details togetherwith applicable detail dimension
33、s of the subrack.1.3 Environmental requirements of subracksThis standard will state environmental requirements of subracks and their associated plug-in units.2. PurposeThe purpose of this standard is the specication of dimensions that will ensure the mechanical interchange-ability and environmental
34、requirements of subracks and of plug-in units.3. ReferencesThe following publications shall be used in conjunctions with this standard. When they are superseded by anapproved revision, the revision shall apply.ANSI/EIA 310-D-1992: Racks, Panels, and Associated Equipment.11ANSI publications are avail
35、able from the Sales Department, American National Standards Institute, 11 West 42nd Street, 13th Floor,New York, NY 10036, USA (www.ansi.org/).IEEEStd 1101.1-1998 IEEE STANDARD FOR MECHANICAL CORE SPECIFICATIONS2Copyright 1998 IEEE. All rights reserved.CFR (Code of Federal Regulations), Title 47: Te
36、lecommunications, Part 15J, published by Ofce of the Fed-eral Register (FCC Rules and Regulations are contained within this document).2IEC 60068-2-1 (1990-05), Environmental testingPart 2: Tests. Tests A: Cold.3IEC 60068-2-2 (1974-01), Environmental testingPart 2: Tests. Test B: Dry Heat.IEC 60068-2
37、-6 (1995-03), Environmental testingPart 2: Tests. Test Fc: Vibration (sinusoidal).IEC 60068-2-11 (1981-01), Environmental testingPart 2: Tests. Test Ka: Salt mist.IEC 60068-2-27 (1987-06), Environmental testingPart 2: Tests. Test Ea and guidance: Shock.IEC 60097 (1991-05), Grid systems for printed c
38、ircuits.IEC 60249-2-1 (1985-01), Base materials for printed circuits. Part 2: Specications. Specication No. 1:Phenolic cellulose paper copper-clad laminated sheet, high electrical quality.IEC 60249-2-2 (1985-01), Base materials for printed circuits. Part 2: Specications. Specication No. 2:Phenolic c
39、ellulose paper copper-clad laminated sheet, economic quality.IEC 60249-2-3 (1987-04), Base materials for printed circuits. Part 2: Specications. Specication No. 3:Epoxide cellulose paper copper-clad laminated sheet of dened ammability (vertical burning test).IEC 60249-2-4 (1987-06), Base materials f
40、or printed circuits. Part 2: Specications. Specication No. 4:Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade.IEC 60249-2-5 (1987-06), Base materials for printed circuits. Part 2: Specications. Specication No. 5:Epoxide woven glass fabric copper-clad laminated sheet of d
41、ened ammability (vertical burning test).IEC 60297-1 (1986-09), Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panelsand racks.IEC 60297-3 (1984-01), Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 3: Sub-racks and associated plug-in units.IEC 602
42、97-4 (1995-03), Mechanical structures of electronic equipmentDimensions of mechanical struc-tures of the 482.6 mm (19 in) series. Part 4: Subracks and associated plug-in unitsAdditional dimensions.IEC 60603-2 (1995-09), Connectors for frequencies below 3 MHz for use with printed boardsPart 2:Detail
43、specication for two-part connectors with assessed quality, for printed boards, for basic grid of2.54 mm (0.1 in), with common mounting features.IEC 60651 (1979-01), Sound level meters.IEC 60707 (1981-01), Methods of test for the determination of the ammability of solid electrical insulatingmaterials
44、 when exposed to an igniting source.IEC 61010-1 (1990-09), Safety requirements for electrical equipment for measurement, control, and labora-tory usePart 1: General requirements.42CFR publications are available from the Superintendent of Documents, U.S. Government Printing Ofce, P.O. Box 37082, Wash
45、ing-ton, DC 20013-7082, USA.3IEC publications are available from the Sales Department of the International Electrotechnical Commission, Case Postale 131, 3, ruede Varemb, CH-1211, Genve 20, Switzerland/Suisse (www.iec.ch/). IEC publications are also available from the Sales Department,American Natio
46、nal Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036, USA (www.ansi.org/).4IEC 61010-1 (1990-09) replaces withdrawn standard IEC 60348 (1978).IEEEFOR MICROCOMPUTERS USING IEC 60603-2 CONNECTORS Std 1101.1-1998Copyright 1998 IEEE. All rights reserved.3IEEE Std 1101.10-1996, IE
47、EE Standard for Additional Mechanical Specications for MicrocomputersUsing the IEEE 1101.1-1991 Equipment Practice.5IEEE 1101.11-1998, IEEE Standard for Mechanical Rear Plug-in Units Specications for MicrocomputersUsing the IEEE 1101.1 and the IEEE 1101.10 Equipment Practice.4. General arrangementSu
48、bracks may be mounted one above another or in combination with suitable instruments and panels inequipment complying with the rack and panel dimensions given in IEC 60297-1 (1986-09) and ANSI/EIA310-D-1992. See Figure 1.5IEEE publications are available from the Institute of Electrical and Electronic
49、s Engineers, 445 Hoes Lane, P.O. Box 1331, Piscataway,NJ 08855-1331, USA (www.standards.ieee.org/).SubrackBox-TypePlug-In UnitsBoard-TypeBox-TypePlug-in UnitsFront PanelRack/CabinetVertical MemberNOTES1Generally, subracks are equipped with printed board or rack-and-panel-type connectors at the rear side, and haveguides for locating or supporting, or both, printed boards or plug-in units.2In principle, the connector is mounted on the right side of the printed board as viewed from the front of the sub-rack.3Table 5 denes the di