1、 IECQ 04-1 Edition 1.0 2010-07IECQ PUBLICATION Standard Training Part 1: IECQ Training Body Requirements and Process for IECQ Acceptance IECQ 04-1:2010(E) IEC Quality Assessment System for Electronic Components (IECQ System) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzer
2、land All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country
3、of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switze
4、rland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of
5、IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (referenc
6、e number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and
7、 also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabula
8、ry online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IECQ 04-1 Edition 1.0 2010-0
9、7IECQ PUBLICATION Standard Training Part 1: IECQ Training Body Requirements and Process for IECQ Acceptance INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Quality Assessment System for Electronic Components (IECQ Scheme) ZZ PRICE CODE 2 IECQ 04-1 IEC:2010(E) CONTENTS FOREWORD.3 INTRODUCTION.4 1 Scope
10、.5 2 Normative references .5 3 Terms and definitions .5 4 Acceptance of IECQ Training Bodies (IECQ TB).5 4.1 Description5 4.2 Responsibilities .6 4.3 Acceptance of training bodies6 4.3.1 Conditions for acceptance .6 4.4 Application to become an IECQ Training Body 6 4.5 Acceptance by IECQ CABC/MC.6 4
11、.5.1 Notification to IECQ Secretariat.6 4.5.2 Notification to IECQ Training Body 7 4.5.3 Withdrawal acceptance7 4.6 IECQ Training Body wishing to withdraw from the IECQ System7 5 Complaints .7 6 Subcontract training .7 7 Other languages.7 IECQ 04-1 IEC:2010(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMIS
12、SION _ Standard Training Part 1: IECQ Training Body Requirements and Process for IECQ Acceptance FOREWORD This publication has been prepared by the Management Committee (MC) of the IECQ. The IECQ has undertaken a major revision of its system and scheme documentation, which now utilize the following
13、document structure. IECQ 01, IEC Quality Assessment System for Electronic Components (IECQ System) Basic Rules IECQ 02, IECQ System General Requirements for the Acceptance of IECQ Certification Bodies into the IECQ System IECQ 03 IECQ Rules of Procedure IECQ 03-1, Rules of Procedure Part 1: General
14、Requirements for all IECQ Schemes IECQ 03-2, Rules of Procedure Part 2: IECQ Approved Process Scheme IECQ 03-3, Rules of Procedure Part 3: IECQ Approved Component Products, Related Materials b) the training body shall maintain a quality management system compliant with ISO 9001 or equivalent. c) the
15、 competence of the training body to comply with these Rules shall be demonstrated by RABQSA certification. 4.4 Application to become an IECQ Training Body The candidate training body, via an IECQ National Authorized Institution (NAI) of the IECQ System, shall make an application for acceptance to op
16、erate as an IECQ Training Body under the applicable IECQ System as defined by their application. Contact RABQSA Coordinator Certification Services, Ms. Cindy McHenry at the following e-mail address to obtain a TPECS application package: . The application package shall be submitted to RABQSA. 4.5 Acc
17、eptance by IECQ CABC/MC 4.5.1 Notification to IECQ Secretariat IECQ Secretariat shall receive notification from RABQSA of certification of a candidate training body. The IECQ Secretariat will circulate this notification to the IECQ CABC/MC for acceptance. IECQ 04-1 IEC:2010(E) 7 4.5.2 Notification t
18、o IECQ Training Body The candidate training body shall be notified of its acceptance as an IECQ Training Body and an IECQ Certificate of Acceptance issuer. The IECQ Training Body shall be informed of its username and password for the IECQ On-Line Training Certificate System. 4.5.3 Withdrawal accepta
19、nce Upon loss of RABQSA certification the IECQ Training Body will no longer be accepted as an IECQ Training Body by IECQ and all rights will be removed. Any subsequent request from the IECQ TB to be re-admitted to the IECQ System shall be regarded as a new application. 4.6 IECQ Training Body wishing
20、 to withdraw from the IECQ System An IECQ Training Body wishing to withdraw from the IECQ System shall notify the IECQ Secretariat. This notification to be at least 6 months in advance and shall indicate the reason for the withdrawal and the date from which the withdrawal will become effective. 5 Co
21、mplaints If there are complaints concerning the actions of an IECQ Training Body that the IECQ CABC and or IECQ MC cannot resolve, the IECQ MC or the complainant shall have the right to request the IEC CAB to take appropriate action. 6 Subcontract training Subcontracting is not permitted although us
22、e of contracted resources under the full control of the IECQ Training Body is permitted. 7 Other languages English is the international language used within the IECQ System. Training material may be delivered in other languages provided that the level of training is consistent with the IECQ Standard Training material. _ INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varemb PO Box 131 CH-1211 Geneva 20 Switzerland Tel: + 41 22 919 02 11 Fax: + 41 22 919 03 00 infoiec.ch www.iec.ch
