1、Designation: F2456 04 (Reapproved 2016)F2456 19Standard Specification forYouth-Resistant Firearms Containers (YRFCs)1This standard is issued under the fixed designation F2456; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the yea
2、r of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis specification is intended to establish means of determining whether Youth Resistant FirearmsContainers (YRFC
3、s) adequately serve the purpose of deterring the unauthorized access to and use offirearms by youths. Subcommittee F15.55 on Youth-Resistant Firearms Containers (YRFCs) firstissued the standard in 2004 at the request of the U.S. Consumer Product Safety Commission (CPSC)and others that ASTM publish a
4、 standard for Youth-Resistant Firearms Containers (YRFCs).The subcommittee defined the scope of their work to develop a standard for those products. Asingle, minimum performance standard for all devices, as opposed to defining several “grades” orperformance levels. Finally, the subcommittee focused
5、on test methods that were objective, realistic,reliable, and repeatable.1. Scope1.1 This specification covers youth-resistant firearms containers (YRFCs), which are lockable containers that completelycontain firearm(s) (2.2.1) to prevent unauthorized access to firearm(s). These containers can be mec
6、hanical, electromechanical, orcombination thereof. This specification:1.1.1 Establishes a moderate security level for firearms storage intended to prevent youths from gaining unauthorized access tofirearm(s); and1.1.2 Establishes a consistent standard for testing and compliance certification.1.2 Thi
7、s specification contains functional, operational, safety, and performance requirements for YRFCs.1.3 This specification does not apply to transport-type weaponsfirearm carrying cases (WCCs), cases, full-sized light guncabinets (LGCs), gun safes (GSs), or cabinets, gun safes, high security gun safes
8、(HSGSs). safes, or container for firearms thatexceed a length of 508 mm (20 in.).1.4 This specification is intended to prevent unauthorized access to children up to and including age eleven.1.5 This specification is not intended to:1.5.1 Ensure theft resistance of the YRFC or the contents of the YRF
9、C; or1.5.2 Ensure quick access to a firearm or assure long-term reliability of theYRFC operation to provide quick access to a firearm.1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.7 The following precautionary caveat pertai
10、ns only to the test method portions of this specification: This standard does notpurport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard toestablish appropriate safety practices and to determine the applicability of regula
11、tory limitations prior to use.1.7 The following precautionary caveat pertains only to the test method portions of this specification: This standard does notpurport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard toestablis
12、h appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations priorto use.1.8 This international standard was developed in accordance with internationally recognized principles on standardizationestablished in the Decision on Principles for the D
13、evelopment of International Standards, Guides and Recommendations issuedby the World Trade Organization Technical Barriers to Trade (TBT) Committee.1 This specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.55 on Fir
14、earm SecurityContainers.Current edition approved Oct. 1, 2016Jan. 15, 2019. Published October 2016January 2019. Originally approved in 2004. Last previous edition approved in 20092016 asF2456 04 (2009).(2016). DOI: 10.1520/F2456-04R16.10.1520/F2456-19.This document is not an ASTM standard and is int
15、ended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the curr
16、ent versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States12. Terminology2.1 Definitions:2.1.1 action, ncombination of the receiver or frame and breech bol
17、t together with the parts of the mechanism by which afirearm is loaded, fired, and unloaded.2.1.2 barrel, nfirearm component through which a projectile travels. May be rifled or bore.2.1.3 combination lock, locking device, nmechanical locking device designed to provide controlled opening of an YRFC
18、byentry of a combination known only by an authorized user(s).2.1.4 compromised, adjcircumstance in which the opening element of the YRFC may not be disabled, yet allows removal ofthe firearm block from the container by hand without the use of tools.2.1.5 digital lock, locking device, nelectromechani
19、cal lock that provides controlled opening of a YRFC by entry of acombination known only by an authorized user(s), or provides a means to read and validate a unique user attribute (as in biometricrecognition devices), or both.2.1.6 disable, vdefeating and opening the YRFC so as to allow removal of th
20、e firearm block, which is classified as a failureto comply. block.2.1.7 fail secure, firearm, advnrendering theYRFC inoperable (unable to open) as a result of damage caused by testing, thuspreventing access to the firearm(s).a barrel and action from which a projectile is propelled through a deflagra
21、tion (burning) ofpropellant.2.1.8 key, nan object intended by the manufacturer to be inserted into the keyway as a means to lock or unlock the container.locking device.2.1.9 key lock, locking device, nmechanical or electromechanical locking device that requires a unique key or token to providecontro
22、lled opening of a YRFC.2.1.10 keyway, nopening in a lock cylinder key locking device that is shaped to accept a key bit, blade, or other unique deviceused to lock or unlock the device.key.2.1.11 locking device, na device that is integral to the YRFC that locks and unlocks the YRFC.2.1.12 manipulatio
23、n, nprocess of code testing a combination-locking device combination in an attempt to cause the locklocking device to open.2.1.12.1 DiscussionManipulation can represent random or methodical code entry attempts or mechanical interpretation of lock reaction to code entry,or both, in which the lock may
24、 provide measurable or tactile feedback to code input.2.1.13 opening element, ncomponent of the containerYRFC that is opened (door, lid, and so forth) to access and remove thefirearm contained inside.2.1.11 plug, npart of a lock cylinder that contains the keyway.2.1.12 properly installed, vYRFC is i
25、nstalled according to the instructions that accompany the YRFC and are provided by themanufacturer.2.1.14 token, nsmall portable key-like electronic device that provides a unique digital serial number or signature and acts asa suitable secure substitute for conventional mechanical keys.2.1.14.1 Disc
26、ussionTokens can transmit a signature by direct electrical connection or via wireless communications techniques (light transmission,radio frequency transmission, vibration, magnets, and so forth).2.1.15 youth, nchild eleven years old or younger.2.1.16 youth-resistant firearms container (YRFC), nlock
27、able security container designed to contain firearm(s) completely andto prevent youths from gaining access to firearm(s).2.2 Definitions of Terms Specific to This Standard:2.2.1 firearm, nlimited to firearms not to exceed a length of 508 mm (20 in.).2.2.2 youth, nchild eleven years old or younger.3.
28、 Calibration and Standardization3.1 All tests shall be conducted within the following tolerances as applicable:3.1.1 All tests shall be conducted at temperatures between 16 and 27F (61 and 81F).F2456 1923.1.2 All tests shall be conducted with relative humidity between 30 and 95 %.3.2 Test specimens
29、shall mechanically represent the exact product intended for sale to the public.3.2.1 Cosmetic product modifications or changes are allowed, provided they do not alter the products mechanical attributes.3.3 One technician conducts testing for any single test.3.4 The testing technician or laboratory s
30、taff, or both, shall not open the test specimens for inspection before any testing.3.5 The testing technician shall not consult with other laboratory staff or observers as it relates to the techniques and methodsused in the testing.3.6 Test specimens shall not be anchored, clamped, or otherwise immo
31、bilized to conduct testing, except where specified.3.7 A wooden firearm block shall be used to represent a firearm for placement inside the YRFC. The YRFC manufacturer shallproduce and install these blocks in each specimen before submission for testing.3.8 Test specimens shall be delivered to the te
32、sting laboratory in a locked condition with a firearm block inside each specimen.3.9 Forces to cause the YRFC to be disabled or compromised shall be limited to not more than 220 N (50 lb).3.10 If a test results in disabling or compromising a test specimen, the testing technician shall not inspect th
33、e failed specimento gain knowledge for use in subsequent tests.3.11 Retesting of a single failed test is allowed to complete a certification of compliance. Retesting does not require rerunningtests previously resulting in a passing result.4. General Qualification and Testing Requirements4.1 Removal
34、of the contents of the YRFC shall be prevented, except by use of a qualified lockkey, combination, or other uniquequalified methods, or both, method, or a combination thereof, as defined by the instructions accompanying the YRFC.3.2 All YRFC locks shall meet the following minimum requirements and pa
35、ss the testing section of this specification (seeSection 4).4.2 Key locks locking devices shall be constructed to operate when the intended key(s) or token(s) are used and pass testingprocedures described in Section shall meet the following additional requirements:4.4.2.1 Key locking devices that us
36、e a key shall have a minimum of 130 actualunique key codes. configurations4.2.2 Key locking devices that use a token shall provide a minimum of 10 000 possible serial numbers or signatures.4.2.3 The operability of each YRFC shall be limited to only one key code.configuration or token.4.2.4 Master ke
37、ying Creating a key or token that unlocks all key locking devices is prohibited, as it provides more than one keycode or token to operate the key lock. locking device.4.3 Acombination lock locking device or digital lock locking device shall meet the following additional requirements and passtesting
38、procedures in Section requirements:4.4.3.1 A qualified combination lock dialing or input of a combination shall provide a minimum of 1000 possible combinationswith at least three numbers or keys. characters or input steps in a combination.4.3.2 Aqualified digital lock that requires digital locking d
39、evice shall require the dialing or input of a combination shall provideproviding a minimum of 1000 possible combinations with at least four numbers or keys. characters or input steps in a combination.4.3.2.1 Digital locks locking devices that support multiple users shall provide 1000 possible combin
40、ations per user.4.3.2.2 Digital locks locking devices shall provide a penalty lockout feature to prevent rapid code testing. The minimum penaltylockout period is 2 minminutes for every five incorrect entry attempts.3.4.2.3 Token locks shall provide a minimum of 10 000 possible codes or signatures.4.
41、3.2.3 Biometric recognition locks shall provide ample identification data points or resolution to allow access to no more than1 in 10 000 possible users.4.3.2.4 Digital locks may provide a “back door” for service, but this combination shall provide a minimum of 1 in 100 000possible combinations.3.5
42、When used in the manner designed and intended by the manufacturer, the YRFC shall be capable of repeated use and shallpass the cycle testing procedures described in this specification.3.6 All tests shall be conducted within the following tolerances as applicable:3.6.1 All tests shall be conducted at
43、 temperatures between 16 and 27C (61 and 81F).3.6.2 All tests shall be conducted with relative humidity between 30 and 95 %.3.7 Test specimens shall mechanically represent the exact product intended for sale to the public.3.7.1 Cosmetic product modifications or changes are allowed, provided they do
44、not alter the products mechanical attributes.3.8 One technician conducts testing for any single test.3.9 The testing technician or laboratory staff, or both, shall not open the test specimens for inspection before any testing.F2456 1933.10 The testing technician shall not consult with other laborato
45、ry staff or observers as it relates to the techniques and methodsused in the testing.3.11 Test specimens shall not be anchored, clamped, or otherwise immobilized to conduct testing, except where specified.3.12 A wooden firearm block shall be used to represent a firearm for placement inside the YRFC.
46、 The manufacturer shallproduce and install these blocks in each specimen before submission for testing.3.13 Test specimens shall be delivered to the testing laboratory in a locked condition with a firearm block inside each specimen.3.14 Forces to cause the YRFC to be disabled or compromised shall be
47、 limited to not more than 220 N (50 lb).3.15 If a test results in disabling or compromising a test specimen, the testing technician shall not inspect the failed specimento gain knowledge for use in subsequent tests.3.16 Retesting of a single failed test is allowed to complete a certification of comp
48、liance. Retesting does not require rerunningtests previously resulting in a passing result.5. Performance Requirements5.1 Cycle Requirements:5.1.1 The YRFC shall be subjected to the cycle testing in 6.1.5.1.2 Failure occurs if the YRFC does not open or lock according to the manufacturers intended me
49、ans of operation.5.2 Picking Requirements:5.2.1 The YRFC shall be subjected to the picking testing in 6.2.5.2.2 Failure occurs if the locking device is disabled, causing the YRFC to open and allowing removal of the firearm block.5.2.3 This test does not apply if the YRFC does not have a keyway or access point(s) that provide tool insertion.5.3 Torque Test for Keyway YRFC:5.3.1 The YRFC shall be subjected to the torque testing in 6.3.5.3.2 Failure occurs if the locking device is disabled, causing the YRFC to open and allowing removal of the firearm blo
