1、 IEC 62330-3 Edition 1.0 2003-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 3: Data stream format Systme de magntoscope numrique cassette balayage hlicodal sur bande magntique de 12,65 mm (0
2、,5 in) Format HD-D5 Partie 3: Format de flux de donnes IEC 62330-3:2003 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2003 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic o
3、r mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact
4、the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris
5、la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit nat
6、ional de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publi
7、shes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published.
8、Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec
9、.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 0
10、00 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance,
11、 please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A prop
12、os des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous pe
13、rmet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de
14、 la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais
15、et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-n
16、ous: csciec.ch. IEC 62330-3 Edition 1.0 2003-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 3: Data stream format Systme de magntoscope numrique cassette balayage hlicodal sur bande magntique
17、 de 12,65 mm (0,5 in) Format HD-D5 Partie 3: Format de flux de donnes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 33.160.40; 35.240.99 PRICE CODE CODE PRIX ISBN 978-2-83220-314-9 Registered trademark of the International Electrotechnical Commission Marq
18、ue dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62330-3 IEC:2003 CONTENTS FOREWORD . 3 1 Scope . 5 2 Norm
19、ative references 5 3 DIF block mapping 5 3.1 DIF block and DIF slice 5 3.2 Mapping of DIF blocks over SDI . 6 4 Audio Data 9 Bibliography 10 Figure 1 DIF block 5 Figure 2 DIF slice structure 6 Figure 3 Slice sell structure over SDI 7 Figure 4 DIF area type and byte allocation of DIF blocks . 8 Figur
20、e 5 Bit allocation . 9 62330-3 IEC:2003 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING SYSTEM USING 12,65 mm (0,5 in) MAGNETIC TAPE FORMAT HD-D5 Part 3: Data stream format FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide orga
21、nization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activit
22、ies, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
23、participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as
24、 possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical
25、specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regi
26、onal standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity wi
27、th one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62330 has been prepared by T
28、echnical Area 6: Higher data rate storage media and equipment of IEC technical committee 100: Audio, video and multimedia systems and equipment. This bilingual version (2012-12) corresponds to the monolingual English version, published in 2003-05. It was submitted to the national committees for voti
29、ng under the Fast Track Procedure as the following documents: CDV Report on voting 100/506/FCDV 100/605/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon.
30、 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until 2008. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 4 62330-3 I
31、EC:2003 IEC 62330-3 consists of the following parts, under the general title Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5. Part 1: VTR specifications Part 2: Compression format Part 3: Data stream format Part 1 describes the VTR specificatio
32、ns which are tape, magnetization, helical recording, modulation method and basic system data for high definition video compressed data on 29,97 or 59,94 frame rate. Part 2 describes the specifications for encoding process and data format for 1080i and 720p systems. This part 3 describes the specific
33、ations for transmission of HD-D5 compressed video and audio data stream over 360 Mb/s serial digital interface. 62330-3 IEC:2003 5 HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING SYSTEM USING 12,65 mm (0,5 in) MAGNETIC TAPE FORMAT HD-D5 Part 3: Data stream format 1 Scope This part of IEC 62330 defines
34、 the data stream used for synchronous transmission of HD-D5 compressed video and audio data over 360 Mb/s serial digital interface (SDI) for the 525/60 system as defined in SMPTE 259M. This practice does not define data stream structure applicable for transmission over the serial data transport inte
35、rface (SDTI), SMPTE 305M. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
36、ANSI/SMPTE 259M, Television 10-bit 4:2:2 Component and 4fsc NTSC Composite Digital Signals Serial Digital Interface ANSI/SMPTE 272M, Television Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data Space 3 DIF block mapping HD-D5 compressed digital video data, assembled as a
37、DIF block stream, are mapped onto an SDI video field for transmission. 3.1 DIF block and DIF slice One field of 1 080/60i, or one frame of 720/60p compressed video is represented by 5 760 DIF Blocks defined in Part 2 as shown in Figure 1. 0 1 2 3 - - - - - - - - - - - - - - - - - 5 756 5 757 5 758 5
38、 759 8 bits 0, 1, 2, 83, 84 Bytenumberin DIF block i : DIF blockFigure 1 DIF block 5 760 DIF blocks are divided into 480 DIF slices, each DIF slice comprising of 12 DIF blocks. DIF blocks in one field (1 080i), or one frame (720p) of video are numbered from 0 through 5 759. Likewise, DIF slices are
39、numbered from 0 through 479. 6 62330-3 IEC:2003 The relationship between DIF block number (BN) and DIF slice number (SN) within the video field or frame is as shown below: SN = int (BN / 12) where BN = 0 to 5 759 DIF Slice structure is shown in Figure 2. BN = 0 to 5 759 12 13 14 15 16 17 18 19 20 21
40、 22 23 5 748 5 749 5 750 5 751 5 752 5 753 5 754 5 755 5 756 5 757 5 758 5 759 SN = 0 SN = 1 SN = 479 0 1 2 3 4 5 6 7 8 9 10 11Figure 2 DIF slice structure 3.2 Mapping of DIF blocks over SDI DIF Blocks shall be mapped into 360 Mb/s SDI that is specified in ANSI/SMPTE 259M. One 1 080i field or one 72
41、0p frame of 5 760 DIF blocks, containing 489 600 words, are mapped into a rectangular area of 1 920 word columns (from sample number 0 to 1 919 horizontally) by 255 word rows (from line number 9 to 263 in the first field or from line number 271 to 525 in the second field vertically) on SDI. In the c
42、ase of 1 080i, DIF blocks of the 1st field compressed video data shall be mapped into the first field of SDI and DIF Blocks of the second field compressed video data shall be mapped into the second field of SDI respectively. One field contains 480 slice cells. One slice cell is composed of 4 word co
43、lumns by 255 word rows. The slice cell structure over SDI is shown in Figure 3. Each DIF slice (see Figure 2) is allocated into each slice cell according to the following expression: CN = (SN 4) mod 480 + int (SN / 120) where SN: DIF slice number CN: Slice cell number Each slice cell is divided into
44、 12 DIF areas. The DIF area, consisting of 85 words, has four different area configurations; i.e. type A through D as shown in Figure 4. Each DIF area is identified by a DIF area number (AN). The DIF block number (BN), DIF area number (AN), and slice cell number (CN) are correlated through the follo
45、wing expressions: CN = int (BN / 12) 4 mod 480 + int (BN / 1 440) AN = BN mod 12 where BN = 0 to 5 759 62330-3 IEC:2003 7 255 words 4 words 1 920 words 0 1 2 3 4 5 6 7 8 - - - - - - - - - - - - - - - - - - - - - - 476 477 478 479 SN SN SN SN SN SN SN SN SN SN SN SN SN 0 120 240 360 1 121 241 361 2 -
46、 - - - - - - - - - 119 239 359 479 EAV SAV Ancillary data space Sample number 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 919 Slicecell Line number (1st field/2nd field) - - - 9 / 271 - - 263 / 525 SDI video
47、field AN : DIF area number (0 to 11) BN : DIF block number (0 to 5 759) CN : Slice cell number (0 to 479) SN : DIF slice number (0 to 479) CN AN 0 1 2 3 4 5 9 10 11 6 0 1 2 3 4 5 10 11 2 880 2 881 2 882 2 883 2 884 4 320 4 321 4 322 4 323 12 13 14 15 1 452 1 453 1 454 2 892 2 893 2 894 4 332 4 333 2
48、4 25 1 428 1 429 2 868 2 869 2 870 4 308 4 309 4 310 4 311 5 748 5 749 5 750 5 751 5 752 5 758 5 759 4 319 1 440 1 441 1 442 1 443 1 444 1 451Figure 3 Slice sell structure over SDI 8 62330-3 IEC:2003 255 words 4 words Slice cell AN = 0 Type A 0 1 2 3 4 5 6 7 80 81 82 83 84 Byte numberin a DIF block 0 1 2 3 4 5 6 79 80 81 82 83 84 0 1 2 3 4 5 78 79 80 81 82 83 84 0 1 2 3 4 77 78 79 80 81 82 83 84 DIF area type A AN : DIF area number 85 words / DIF area AN = 1 Type B AN = 2 Type C AN = 3 Type D AN = 4 Type A AN = 5 Type B AN = 6 Type C
