1、INTERNATIONAL STANDARD IEC 62330-1 First edition 2003-05 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 1: VTR specifications Reference number IEC 62330-1:2003(E)Publication numbering As from 1 January 1997 all IEC publications are issued
2、 with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publicatio
3、n incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this
4、publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, a
5、s well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fut.htm) enables you to search by a variety of criteria including text searches, technica
6、l committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (http:/www.iec.ch/online_news/ justpub/jp_entry.htm) is also availa
7、ble by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 9
8、19 03 00INTERNATIONAL STANDARD IEC 62330-1 First edition 2003-05 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 1: VTR specifications IEC 2003 Copyright - all rights reserved No part of this publication may be reproduced or utilized in an
9、y form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-ma
10、il: inmailiec.ch Web: www.iec.ch XB For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 62330-1 IEC:2003(E) CONTENTS FOREWORD 5 1 Scope 7 2 Normative references. 9 3 Environment and test conditions 9 3.1 Environment . 9 3
11、.2 Reference tape. 9 3.3 Calibration tape 9 4 Video tape 10 4.1 Base10 4.2 Width.10 4.3 Width fluctuation10 4.4 Tape thickness 10 4.5 Transmissivity10 4.6 Offset yield strength 10 4.7 Magnetic coating .10 4.8 Coating coercivity10 4.9 Particle orientation.10 5 Helical recordings .11 5.1 Tape speed .1
12、1 5.2 Record location and dimensions 11 5.3 Helical track record tolerance zones 14 5.4 Relative positions of recorded information .15 5.5 Gap azimuth 15 5.6 Transport and scanner.16 6 Programme track data.19 6.1 Introduction .19 6.2 Labelling convention19 6.3 Sector details 19 6.4 Edit gaps .27 6.5
13、 Channel code 27 6.6 Magnetization 39 7 Video interface .40 8 Audio interface .40 8.1 Encoding parameters.40 8.2 Digital signal interface .40 9 Video processing 40 9.1 Introduction .40 9.2 Recorded data.40 9.3 Channel and video block distribution42 9.4 Word data arrangement .42 9.5 Video randomize43
14、 9.6 Outer error protection 43 9.7 Field data array .43 9.8 Order of transmission to inner coding 4562330-1 IEC:2003(E) 3 10 Audio processing 45 10.1 Introduction .45 10.2 Source coding45 10.3 Source processing.48 10.4 Auxiliary words 52 10.5 Outer error protection 56 10.6 Inner protection .57 10.7
15、Order of transmission to inner coding 57 10.8 Channel code 57 10.9 Allocation of audio sectors.57 11 Longitudinal tracks58 11.1 Relative timing.58 11.2 Control track58 11.3 Cue record.59 11.4 Time and control code record 59 Annex A (normative) Tape tension .60 Annex B (normative) Cross-tape track me
16、asurement technique61 Annex C (normative) Track pattern during insert editing .65 Bibliography66 Figure 1 Record block diagram 8 Figure 2 Playback block diagram. 8 Figure 3 Location and dimensions of recorded tracks.12 Figure 4 Location of cue and time and control code track record 13 Figure 5 Locat
17、ion and dimensions of tolerance zones of helical track record 15 Figure 6 A possible scanner configuration17 Figure 7 A possible longitudinal head location and tape wrap.18 Figure 8 Sector arrangement on helical track .19 Figure 9 Sync block format.20 Figure 10 Sync block identification format 21 Fi
18、gure 11 Track, segment and field numbers22 Figure 12 Sync block number .23 Figure 13 Sector preamble and postamble .26 Figure 14 Reconfigured data 41 Figure 15 Channel and video block distribution 42 Figure 16 Field data array 44 Figure 17 Audio data block field array 47 Figure 18 Audio data block l
19、ayout 50 Figure 19 Audio data block arrangement 51 Figure 20 Digital audio word to byte conversion .52 Figure 21 Audio data block auxiliary data .53 Figure 22 Audio channel arrangement57 Figure 23 Recorded control record waveform timing.58 4 62330-1 IEC:2003(E) Figure B.1 Correction factors (actual
20、tape speed and tension)63 Figure B.2 Cross-tape measurement technique 63 Figure B.3 Track location error plot (example)64 Figure C.1 A typical pattern during insert editing 65 Table 1 Record location and dimensions 14 Table 2 Parameters for a possible scanner design .16 Table 3 8-14 modulation (CDS0
21、) 29 Table 4 8-14 modulation (CDS0) 34 Table 5 Priority of modulation code selection (end DSV = 2) 39 Table 6 Priority of modulation code selection (end DSV = +2) 39 Table 7 Data rate and wavelength39 Table 8 Signal format information.41 Table 9 AES status data (Byte 0) .48 Table 10 AES status data
22、(Byte 1)48 Table 11 Audio data word mode .51 Table 12 Channel use control word 54 Table 13 Pre-emphasis control word 54 Table 14 Word mode control word55 Table 15 FNCT mode .55 Table B.1 Nomenclature and calculation of track location error 6262330-1 IEC:2003(E) 5 INTERNATIONAL ELECTROTECHNICAL COMMI
23、SSION _ HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING SYSTEM USING 12,65 mm (0,5 in) MAGNETIC TAPE FORMAT HD-D5 Part 1: VTR specifications FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committe
24、es (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted
25、 to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the Interna
26、tional Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects sinc
27、e each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the Natio
28、nal Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding
29、national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of
30、 the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62330-1 has been prepared by Technical Area 6: Higher data rate storage media and equipment of IEC technic
31、al committee 100: Audio, video and multimedia systems and equipment. It was submitted to the national committees for voting under the Fast Track Procedure as the following documents: CDV Report on voting 100/504/CDV 100/603/RVC Full information on the voting for the approval of this standard can be
32、found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until 2008. At this date, the publication will be reconfirmed; withdr
33、awn; replaced by a revised edition, or amended. 6 62330-1 IEC:2003(E) IEC 62330 consists of the following parts, under the general title Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5. Part 1: VTR specifications Part 2: Compression format Part
34、 3: Data stream format This part 1 describes the VTR specifications which are tape, magnetization, helical recording, modulation method and basic system data for high definition video compressed data on 29,97 or 59,94 frame rate. Part 2 describes the specifications for encoding process and data form
35、at for 1080i and 720p systems. Part 3 describes the specifications for transmission of HD-D5 compressed video and audio data stream over 360 Mb/s serial digital interface.62330-1 IEC:2003(E) 7 HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING SYSTEM USING 12,65 mm (0,5 in) MAGNETIC TAPE FORMAT HD-D5 Par
36、t 1: VTR specifications 1 Scope This part of IEC 62330 specifies the content, format, and recording method of the data blocks containing HD compressed video data defined in part 2, audio, and associated data which form the helical records on 12,65 mm (0,5 in) tape in cassettes as specified in IEC 61
37、835. In addition, this standard specifies the content, format, and recording method of the longitudinal record containing tracking information for the scanning head associated with the helical records, and also the longitudinal cue audio, and time and control code. One video channel of HD compressed
38、 video data and four independent audio channels are recorded in the digital format. Each of these channels is designed to be capable of independent editing. The HD compressed video data are derived from the following HD video signal: 1080 line / 59,94 Hz field frequency interlace system 720 line / 5
39、9,94 Hz frame frequency progressive system Figure 1 and Figure 2 show block diagrams of the processes involved in the recorder. 8 62330-1 IEC:2003(E) ANALOG/ DIGITAL INTERFACE INTRA- FIELD SHUFFLE BLOCK SHUFFLE AUDIO(ANALOG) (DIGITAL AES/EBU) VIDEO OUTER ECC ENCODER COMPRESSED HD DIGITAL DATA HELICA
40、L TRACK RECORD DRIVER AND HEAD CHANNEL CODER INNER ECC ENCODER DATA MUX SYNC/ ID GEN. CONTROL TRACK INFORMATION CONTROL TRACK GEN. TIME AND CONTROL CODE EXT T.C. TIME CODE GEN. CUE (ANALOG) REC. AMP RECORD DRIVERS AND HEADS CHANNEL DEMUX SWITCH OUTER ECC ENCODER INTRA- FIELD SHUFFLE Figure 1 Record
41、block diagram AUDIO(ANALOG) DIGITAL/ ANALOG INTERFACE INTRA- FIELD DESHUFFLE (DIGITAL AES/EBU) AUDIO ERROR CONCEAL OUTER ECC DECODER BLOCK DESHUFFLE VIDEO VIDEO ERROR CONCEAL HELICAL TRACK PLAYBACK HEAD PRE AMP AND EQ. CONTROL TRACK INFORMATION CONTROL TRACKP.B. TIME AND CONTROL CODE T.C. TIME CODER
42、EADER CUE (ANALOG) P.B. AMP HEADS AND PLAYBACK INTERFACE SYNC DETEC CHANNEL DECODER INNER ECC DECODER DATA DEMUX INTRA- FIELD DESHUFFLE CHANNEL MUX SWITCH OUTER ECC DECODER COMPRESSED HD DIGITAL DATA Figure 2 Playback block diagram62330-1 IEC:2003(E) 9 2 Normative references The following referenced
43、 documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60461:2001, Time and control code for video tape recorders IEC 60958,
44、 Digital audio interface IEC 61835, Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnet tape Format D-5 ITU-R BS. 647 A digital audio interface for broadcasting studios SMPTE RP 155:1995, Audio levels and Indicators for Digital Audio Records on Digital Telev
45、ision Tape Recorders 3 Environment and test conditions 3.1 Environment Tests and measurements made on the system to check the requirements of this standard shall be carried out under the following conditions: Temperature 20 C 1 C Relative humidity (50 2) % Barometric pressure from 86 kPa to 106 kPa
46、Tape conditioning not less than 24 h Centre tape tension 0,31 N 0,05 N (see Annex A) 3.2 Reference tape Blank tape for reference recordings should be available from any source meeting the tape characteristics as portrayed by this standard. 3.3 Calibration tape The calibration tapes meeting the requi
47、rements of 3.3.1 and Clause 4 should be available from manufacturers who produce DTTRs and players in accordance with this standard. 3.3.1 Record locations and dimensions Tolerances shown in Table 1 will be reduced by 50 %. 3.3.2 Calibration signals Two sets of signals should be recorded on the cali
48、bration tape: a) Video: 100 % colour bars Audio: 1 kHz tone at 20 dB below full scale on each of audio channels Cue: 1 kHz tone at reference level; 10 kHz tone at reference level 10 62330-1 IEC:2003(E) b) A signal of constant recorded frequency (i.e. one-half the Nyquist frequency) shall be recorded
49、 only on tracks of field 0, segment 0 for the purpose of mechanical alignment. Recording level should conform to 6.6.3. 4 Video tape 4.1 Base The base material shall be polyester or equivalent. 4.2 Width The tape width shall be 12,650 mm 0,008 mm. The tape, covered with glass, is measured without tension at a minimum of five different pos
