1、 IEC 62319-1-1 Edition 1.0 2005-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Polymeric thermistors Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification Current limiting application Thermistances polymres Coefficient de temprature positif de fonction c
2、helon chauffage direct Partie 1-1: Spcification particulire cadre Application de la limitation de courant IEC 62319-1-1:2005 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2005 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
3、or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining a
4、dditional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et
5、 par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, util
6、isez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is th
7、e leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a c
8、orrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and with
9、drawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of elec
10、tronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your fee
11、dback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit
12、, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications C
13、EI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpubl
14、ished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il con
15、tient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette
16、publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62319-1-1 Edition 1.0 2005-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Polymeric thermistors Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification Current limiting application Th
17、ermistances polymres Coefficient de temprature positif de fonction chelon chauffage direct Partie 1-1: Spcification particulire cadre Application de la limitation de courant INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 31.040.30 PRICE CODE CODE PRIX ISBN
18、 978-2-83220-726-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette pub
19、lication via un distributeur agr. 2 62319-1-1 IEC:2005 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POLYMERIC THERMISTORS DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT Part 1-1: Blank detail specification Current limiting application FOREWORD 1) The International Electrotechnical Com
20、mission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
21、 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee
22、 interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accord
23、ance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inte
24、rested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held respons
25、ible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence
26、between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All
27、 users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or
28、 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publicati
29、on. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such p
30、atent rights. International Standard IEC 62319-1-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This bilingual version (2013-05) corresponds to the monolingual English version, published in 2005-02. The text of this standard is based on the foll
31、owing documents: FDIS Report on voting 40/1506/FDIS 40/1535/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 62319-1-1 IEC:2005 3 The French version of this standard has not been voted upon. This publication has b
32、een drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this
33、date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 4 62319-1-1 IEC:2005 POLYMERIC THERMISTORS DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT Part 1-1: Blank detail specification Current limiting application INTRODUCTION Blank detail speci
34、fication A blank detail specification is a supplementary document to the generic specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with
35、IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 4.1 of the generic specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position
36、indicated. Identification of the detail specification 1 The “International Electrotechnical Commission” or the National Organisation under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any other information
37、required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the thermistor 5 A short description of the type of thermistor. 6 Information on typical construction (if applicable). NO
38、TE When the thermistor is not designed for use on printed boards, this should be stated in the detail specification in this position. 7 Outline drawing with main dimensions which are important for the interchangeability and/or reference to the national or international documents for outlines. Altern
39、atively, this drawing may be given in the annex to the detail specification. 8 Application or group of applications covered and/or assessment level. 9 Reference data on the most important properties, to allow comparison between the various thermistor types. 62319-1-1 IEC:2005 5 Information on the av
40、ailability of components qualified to this detail specification is given in IEC QC 001005. 1 IEC 62319-1-1-XXX 2 QC XXXXXX-XXX ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3 IEC 62319-1-1 4 QC XXXXXX POLYMERIC POSITIVE TEMPERATURE COEFFICIENT 5 THERMISTORS FOR CURRENT LIMITING APPLI
41、CATION Outline drawing: (see Table 1) ( angle projection) 7 (Other shapes are permitted within the dimensions given) 6 Assessment level(s): EZ 8 NOTE For 1 to 9 see preceding page. 9 1 General data 1.1 Method(s) of mounting (to be inserted) See 4.9 of IEC 62319-1. 1.2 Dimensions All dimensions are i
42、n millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging. Dimensional drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Normative references The followi
43、ng referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068, Environmental testing IEC 60410, Sampling plans a
44、nd procedures for inspection by attributes IEC 62319-1; Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification 1_ 1To be published. 6 62319-1-1 IEC:2005 1.4 Coating The detail specification shall state (if applicable): a) whether the coatin
45、g is insulating or non-insulating; b) the material; c) the colour, if applicable. 1.5 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.6
46、 Flammability The detail specification shall state whether the thermistor is actively or passively flammable, if applicable. 1.7 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant, if applicable. 1.8 Packaging The d
47、etail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages;
48、 d) methods of disposal of the packaging material. 1.9 Electrical data/ratings and characteristics The detail specification shall give the units and tolerances or limiting values for the following parameters, if applicable. If necessary, electrical data may be listed in tabular form, with reference
49、to style and codes. Operating temperature range Maximum voltage (U max ) Zero power resistance (R t ) Isolation voltage (insulated thermistors only) Insulation resistance (insulated thermistors only) Trip current (I t ) Hold current (I h ) Residual current at U max(I res ) Maximum current (I max ) Time-to-trip (t trip ) Fault current (I fault ) Power dissipation (P d