1、 IEC 62149-3 Edition 2.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems Composants et dispositifs actifs fibres opti
2、ques Normes de performances Partie 3: Emetteurs diodes laser modulateur intgr pour des systmes de transmission fibres optiques de 2,5 Gbit/s 40 Gbit/s IEC 62149-3:2014-05(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise spec
3、ified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions abo
4、ut IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre re
5、produite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des dr
6、oits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The Internat
7、ional Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please ma
8、ke sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports an
9、d other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and with
10、drawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of elect
11、ronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical termino
12、logy entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback
13、on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectr
14、onique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application a
15、utonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance p
16、ermet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications I
17、EC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais,
18、 ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinition
19、s des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch.
20、IEC 62149-3 Edition 2.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems Composants et dispositifs actifs fibres optiq
21、ues Normes de performances Partie 3: Emetteurs diodes laser modulateur intgr pour des systmes de transmission fibres optiques de 2,5 Gbit/s 40 Gbit/s INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1585-2 Regis
22、tered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distribu
23、teur agr. 2 IEC 62149-3:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and symbols . 7 3.1 Terms and definitions 7 3.2 Symbols 7 4 Product parameters . 7 4.1 Absolute limiting ratings 7 4.2 Operating environment 8 4.3 Functional specifica
24、tion 8 4.4 Diagrams 10 5 Testing 10 5.1 General . 10 5.2 Characterization testing 10 5.3 Performance testing 11 6 Environmental specifications . 13 6.1 General safety 13 6.2 Laser safety 13 Bibliography 14 Figure 1 Schematic diagram 10 Table 1 Absolute limiting ratings 8 Table 2 Operating environmen
25、t 8 Table 3 Operating conditions for functional specification 8 Table 4 Functional specification . 9 Table 5 Characterization tests . 11 Table 6 Performance test plan . 12 Table 7 Recommended performance test failure criteria . 13 IEC 62149-3:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26、 _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compri
27、sing all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standa
28、rds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepar
29、atory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organiza
30、tions. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of
31、recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
32、by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regiona
33、l publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
34、independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for
35、 any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Norm
36、ative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held respo
37、nsible for identifying any or all such patent rights. International Standard IEC 62149-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics This second edition cancels and replaces the first edition published in 2004 and constit
38、utes a technical revision. The significant technical change with respect to the previous edition is as follows: The performance standards covered by this standard are now extended to a 40 Gb/s-class system from their original 2,5 Gb/s. 4 IEC 62149-3:2014 IEC 2014 The text of this standard is based o
39、n the following documents: CDV Report on voting 86C/1157/CDV 86C/1230/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of
40、 all parts of the IEC 62149 series, published under the general title Fibre optic active components and devices Performance standards, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC
41、web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 62149-3:2014 IEC 2014 5 INTRODUCTION Fibre optic transmitters are used to convert electrical signals in
42、to optical signals. This part of IEC 62149 covers the performance standard for optical modulators monolithically integrated with laser diodes for 2,5 Gbit/s to 40 Gbit/s multi-channel optical telecommunication systems. 6 IEC 62149-3:2014 IEC 2014 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE
43、 STANDARDS Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems 1 Scope This part of IEC 62149 covers the performance specification for optical modulators monolithically integrated with laser diodes for 2,5 Gbit/s to 40 Gbit/s multi-chann
44、el fibre optic transmission systems. This performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities and pass/fail criteria. The tests are intended to be run as an initial des
45、ign verification to prove any products ability to satisfy the performance standards requirements. This standard is only applicable for on-off keying format. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard
46、, but should then be controlled by a quality assurance program. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, th
47、e latest edition of the referenced document (including any amendments) applies. IEC 60068-2-1, Environmental testing Part 2: Tests Tests A: Cold IEC 60068-2-2, Basic environmental testing procedures Part 2: Tests Tests B: Dry heat IEC 60068-2-6, Environmental testing Part 2: Tests Test Fc: Vibration
48、 (sinusoidal) IEC 60068-2-14, Basic environmental testing procedures Part 2: Tests Test N: Change of temperature IEC 60068-2-27, Basic environmental testing procedures Part 2: Tests Test Ea and guidance: Shock IEC 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state I
49、EC 60749-7, Semiconductor devices Mechanical and climatic test methods Part 7: Internal moisture content measurement and the analysis of other residual gases IEC 60749-26, Semiconductor devices Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing Human body model (HBM) IEC 60825-1, Safety of laser products Par
