1、 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE61300-2-50First editionPremire dition2007-06Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-50: Tests Fibre optic connector proof test with static load Singlemode and multimode Dispositifs dinte
2、rconnexion et composants passifs fibres optiques Mthodes fondamentales dessais et de mesures Partie 2-50: Essais Essai de rsistance des connecteurs fibres optiques sous charge statique Unimodal et multimodal Reference number Numro de rfrence IEC/CEI 61300-2-50:2007 THIS PUBLICATION IS COPYRIGHT PROT
3、ECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs
4、member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduct
5、ion rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du dem
6、andeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerla
7、nd Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC
8、 publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference n
9、umber, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and al
10、so by email. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Comm
11、ission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est consta
12、mment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (n
13、umro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publica
14、tions parues. Disponible en-ligne et aussi par email. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22
15、919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE61300-2-50First editionPremire dition2007-06Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-50: Tests Fibre optic connector proof test with static load Singlemode
16、and multimode Dispositifs dinterconnexion et composants passifs fibres optiques Mthodes fondamentales dessais et de mesures Partie 2-50: Essais Essai de rsistance des connecteurs fibres optiques sous charge statique Unimodal et multimodal H Commission Electrotechnique InternationaleInternational Ele
17、ctrotechnical Commission PRICE CODE CODE PRIX For price, see current cataloguePour prix, voir catalogue en vigueur 2 61300-2-50 IEC:2007 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references5 3 General description.5 4 Apparatus.5 5 Procedure.6 5.1 General .6 5.2 Preparation of specimen 7 5.3 Precondi
18、tioning7 5.4 Initial measurements .7 5.5 Test method 7 5.6 Recovery.7 5.7 Final measurements 7 6 Details to be specified.8 Figure 1 Proof test apparatus .6 Figure 2 Application of the load in the case of duplex cordage 6 61300-2-50 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC I
19、NTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES Part 2-50: Tests Fibre optic connector proof test with static load Singlemode and multimode FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising a
20、ll national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, T
21、echnical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory
22、work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
23、 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomm
24、endations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any
25、 end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publ
26、ication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication.
27、 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
28、costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct app
29、lication of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61300-2-50 has been prepared by su
30、bcommittee 86b Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/2509/FDIS 86B/2543/RVD Full information on the voting for the approval of this standard can
31、 be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61300-2-50 IEC:2007 A list of all parts of the IEC 61300 series, published under the general title Fibre optic interconnecting devices and passive co
32、mponents Basic test and measurement procedures, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific pub
33、lication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. _ NOTICE This document contains material that is Copyright 2006, Telcordia Technologies, Inc. (“Telcordia“). All rights reserved. The reader is advised that this IEC document and Telcor
34、dia source(s) may differ, and the context and use of said material in this IEC document may differ from that of Telcordia. TELCORDIA MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION CONTAINED HEREIN. ANY USE
35、OF OR RELIANCE UPON SAID INFORMATION OR OPINION IS AT THE RISK OF THE USER. TELCORDIA SHALL NOT BE LIABLE FOR ANY DAMAGE OR INJURY INCURRED BY ANY PERSON ARISING OUT OF THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION CONTAINED HEREIN. 61300-2-50 IEC:2007 5 FIBRE OPTIC INTERCONNEC
36、TING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES Part 2-50: Tests Fibre optic connector proof test with static load Singlemode and multimode 1 Scope This part of IEC 61300 describes a test to quantitatively assess the capability of connector terminated patchcord cable assemb
37、lies to withstand static loads without uncoupling of the connector, physical damage to the assembly or permanent degradation of optical performance. This test is intended to apply to terminated reinforced jacketed cable of any diameter, both singlemode and multimode. 2 Normative references The follo
38、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-1, Fibre optic interconnecting devices and passi
39、ve components Basic test and measurement procedures Part 1: General and guidance IEC 61300-3-1, Fiber optic interconnecting devices and passive components Basic test and measurement procedures Part 3-1: Examinations and measurements Visual examination IEC 61300-3-6, Fiber optic interconnecting devic
40、es and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return Loss IEC 61300-3-34, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random ma
41、ted connectors 3 General description Static loads are applied to the cable of a patchcord assembly at 0 (straight pull) and at 90 (side pull) to the connector axis and held for a fixed time, while the mated connector assembly is held fixed by the adapter. The sample is examined and measured for atte
42、nuation and return loss before and after each load is applied. 4 Apparatus The apparatus for this test is shown in Figure 1. The patchcord tension is applied with weights through a capstan. The patchcord is flexed at the point of entrance to the connector plug by rotating the test arm. The position
43、of the connector assembly along the test arm should be adjusted so that, when the arm is at 90, the centerline along which the cable hangs passes through the test point. The fixture is to be designed to allow the capstan to be rotated about the axis of the section of cable under tension. 6 61300-2-5
44、0 IEC:2007 The bracket on which the adapter is mounted is to have provision for mounting the adapter at angles of 0 and 90 to the axis of the connector. Test arm For proof, angle is 0 and 90 (only 90 shown) Pivot point of test arm Connector Guides Weights 20 cm-28 cm Capstan 7,5 cm Jumper cableIEC 9
45、53/07 Figure 1 Proof test apparatus In the case of duplex cordage, the loads shall not be doubled and the cordage shall be bent in the minor axis direction as shown in Figure 2. Load Duplex cordage IEC 954/07Figure 2 Application of the load in the case of duplex cordage 5 Procedure 5.1 General The f
46、ollowing procedure shall be used in this test. The loads to be applied are those designated in the relevant specification at a rate of 5 N/s for reinforced cables. If these are not specified the following preferred loads may be used: For small form factor connectors the preferred load at 90 is 2/3 o
47、f the specified values. Straight pull, 0: 44,5 N 61300-2-50 IEC:2007 7 Side pull, 90: 22,6 N All optical measurements shall be made for singlemode at 1 310 nm and 1 550 nm wavelengths and multimode at 850 nm and 1 300 nm wavelengths. Optional: singlemode at 1 625 nm, or as specified for the appropri
48、ate technology (for example, multimode at 650 nm). 5.2 Preparation of specimen Prepare and clean the specimen in accordance with the manufacturers instructions. 5.3 Preconditioning Pre-condition the specimen for 2 h at the standard test conditions as defined in IEC 61300-1, unless otherwise specifie
49、d in the relevant specification. 5.4 Initial measurements Complete initial examinations and measurements on the specimen as required by the relevant specification. 5.5 Test method 5.5.1 Mount the specimen in the apparatus shown in Figure 1. 5.5.2 Measure attenuation and return loss as described in IEC
