1、 IEC 61169-54 Edition 1.0 2016-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 , series 4,3-10 Connecteurs pour frquences radiolectrique
2、s Partie 54: Spcification intermdiaire relative aux connecteurs coaxiaux avec diamtre intrieur du conducteur extrieur de 10 mm, impdance caractristique nominale de 50 , srie 4,3-10 IEC 61169-54:2016-09(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerla
3、nd All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of
4、 the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucu
5、ne partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyr
6、ight de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Swit
7、zerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kep
8、t under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, T
9、echnical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also giv
10、es information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org
11、The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000
12、 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish
13、to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a
14、 trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.c
15、h/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/search
16、pub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les
17、 nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en angla
18、is et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et
19、Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: cs
20、ciec.ch. IEC 61169-54 Edition 1.0 2016-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 , series 4,3-10 Connecteurs pour frquences radiol
21、ectriques Partie 54: Spcification intermdiaire relative aux connecteurs coaxiaux avec diamtre intrieur du conducteur extrieur de 10 mm, impdance caractristique nominale de 50 , srie 4,3-10 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 33.120.30 ISBN 978-2-8
22、322-3629-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication
23、 via un distributeur agr. colour inside 2 IEC 61169-54:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Mating face and gauge information . 7 3.1 Dimensions General connectors Grade 2 . 7 3.1.1 Connector with pin-centre contact (see Figure 1) 7 3.1.2 Connect
24、or with socket-centre contact (see Figure 2) . 10 3.1.3 Presentation of possible coupling mechanisms . 12 3.2 Gauges . 15 3.2.1 Gauge pins for socket-centre contact (see Figure 6) . 15 3.2.2 Test procedure . 15 3.2.3 Gauge rings for plug outer contact (see Figure 7) . 16 3.2.4 Test procedure . 16 3.
25、3 Dimensions Standard test connectors Grade 0 . 17 3.3.1 Connector with pin-centre contact (see Figure 8) 17 3.3.2 Connector with socket-centre contact (see Figure 9) . 19 4 Quality assessment procedure . 20 4.1 General . 20 4.2 Ratings and characteristics . 21 4.3 Test schedule and inspection requi
26、rements 24 4.3.1 Acceptance tests 24 4.3.2 Periodic tests . 25 4.4 Procedures for quality conformance . 26 4.4.1 Quality conformance inspection 26 4.4.2 Quality conformance and its maintenance . 26 4.5 Test and measurement procedures 26 4.5.1 General . 26 4.5.2 Schedule of basic test groupings for a
27、cceptance and periodic tests . 26 4.6 Specifications . 27 4.6.1 Specification structures 27 4.6.2 Sectional specification (SS) 27 4.6.3 Detail specification (DS) . 27 4.6.4 Blank detail specification 27 4.6.5 Blank detail specification pro-forma for 50 type 4,3-10 connectors . 28 5 Marking . 33 5.1
28、Marking of component . 33 5.2 Marking and contents of package 34 Figure 1 Connector with pin-centre contact (for dimensions and key, see Table 1) . 8 Figure 2 Connector with socket-centre contact (for dimensions and key, see Table 2) . 10 Figure 3 Screw type . 12 Figure 4 Hand screw type. 13 Figure
29、5 Quick lock type . 14 Figure 6 Gauge pins for socket-centre contact (for dimensions, see Table 3). 15 IEC 61169-54:2016 IEC 2016 3 Figure 7 Gauge rings for socket outer contact (for dimensions see Table 4) 16 Figure 8 Connector with pin-centre contact (for dimensions and key, see Table 5) . 17 Figu
30、re 9 Connector with socket-centre contact (for dimensions and key, see Table 6) . 19 Table 1 Dimensions of connector with pin-centre contact 9 Table 2 Dimensions of connector with socket-centre contact . 11 Table 3 Dimensions of gauge pins for socket-centre contact . 15 Table 4 Dimensions of gauge r
31、ings for socket outer contact 16 Table 5 Dimensions of connector with pin-centre contact 18 Table 6 Dimensions of connector with socket-centre contact . 20 Table 7 Climatic categories 21 Table 8 Ratings and characteristics 22 Table 9 Acceptance tests . 24 Table 10 Periodic tests 25 4 IEC 61169-54:20
32、16 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 , series 4 ,3-10 FOREWORD 1) The International Electrotechnical Commission (IEC
33、) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
34、 to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
35、in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with co
36、nditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC N
37、ational Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the
38、 way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any
39、IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity
40、. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
41、 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any
42、other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be
43、the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-54 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, RF connectors, RF a
44、nd microwave passive components and accessories. The text of this standard is based on the following documents: FDIS Report on voting 46F/348/FDIS 46F/354/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publ
45、ication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61169-54:2016 IEC 2016 5 A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication
46、will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the
47、cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 61169-54:2016 IEC 2016 INTRODUCTION The International Electrotechnical Commissio
48、n (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the design of these connectors given in 3.1.2. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right
49、has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. More detailed Information may be obtained from: Mrs. Julia Mayer Mrs. Katrin Groeger eMail: julia.mayerkathrein.de eMa
