1、 INTERNATIONAL STANDARD IEC 60939-2Second edition 2005-02Passive filter units for electromagnetic interference suppression Part 2: Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements Reference number IEC 60939-2:2005(E) Publicatio
2、n numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2
3、 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the
4、content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken
5、 by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a varie
6、ty of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_
7、news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +
8、41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 60939-2Second edition 2005-02Passive filter units for electromagnetic interference suppression Part 2: Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements IEC 2005 C
9、opyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box
10、131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch X For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 60939-2 IEC:2005(E) CONTENTS FOREWORD.4
11、1 General6 1.1 Scope6 1.2 Normative references 6 1.3 Information to be given in a detail specification 7 1.4 Definitions.8 1.5 Marking.9 2 Preferred ratings and characteristics.10 2.1 Preferred characteristics10 2.2 Preferred values of ratings.10 3 Quality assessment procedures 11 3.1 Primary stage
12、of manufacture 11 3.2 Structurally similar filters .11 3.3 Certified records of released lots11 3.4 Approval testing.11 3.5 Quality conformance inspection .13 4 Test and measurement procedures .18 4.1 Earth inductors incorporated in filters.18 4.2 Capacitance and tan measurements18 4.3 Visual examin
13、ation and check of dimensions18 4.4 Voltage proof.19 4.5 Insulation resistance20 4.6 DC line resistance or voltage drop at rated current .20 4.7 Insertion loss.21 4.8 Discharge resistance .21 4.9 Robustness of terminations22 4.10 Resistance to soldering heat22 4.11 Solderability 22 4.12 Rapid change
14、 of temperature.22 4.13 Vibration23 4.14 Bump 23 4.15 Shock24 4.16 Container sealing 24 4.17 Climatic sequence .25 4.18 Damp heat, steady state 26 4.19 Temperature rise .26 4.20 Impulse voltage .28 4.21 Endurance.29 4.22 Charge and discharge31 4.23 Passive flammability 32 4.24 Current overload32 4.2
15、5 Solvent resistance of the marking 32 4.26 Component solvent resistance .33 4.27 Active flammability.33 60939-2 IEC:2005(E) 3 Annex A (normative) Test schedule for qualification approval Assessment level D / DZ 34 Annex B (normative) Test schedule for safety requirements only.38 Annex C (normative)
16、 Circuit for the impulse voltage test .40 Annex D (normative) Circuit for the endurance test.42 Annex E (normative) Declaration of design.43 Figure 1 Impulse wave form .29 Figure C.1 Impulse voltage test circuit40 Table 1 Classification of class X capacitors 8 Table 2 Classification of class Y capac
17、itors 9 Table 3 Tests concerning safety requirements only.14 Table 4 Sampling plan Safety and performance tests qualification approval Assessment level D / DZ.15 Table 5 Lot-by-lot-tests Assessment level D / DZ.16 Table 6 Lot-by-lot test Safety tests only approval.16 Table 7 Periodic tests Assessmen
18、t level D / DZ .17 Table 8 Creepage distances and clearances.18 Table 9 Voltage proof.19 Table 10 Insulation resistance20 Table 11 Preferred severities .24 Table 12 Measurements and requirements after charge and discharge31 Table A.1 Test schedule for qualification approval Assessment level D / DZ.3
19、4 Table B.1 Test schedule for safety requirements only .38 Table C.1 Values of C X , C T , R P , R S , C P .40 Table C.2 Values and tolerances of C x , t r , t d .41 4 60939-2 IEC:2005(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION Pa
20、rt 2: Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nat
21、ional Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publ
22、icly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- gover
23、nmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC o
24、n technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepte
25、d by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international
26、 uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latte
27、r. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its dir
28、ectors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arisi
29、ng out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is d
30、rawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60939-2 has been prepared by IEC technical committee 40: Capacitors and resistors
31、 for electronic equipment. This second edition cancels and replaces the first edition published in 1988. This second edition constitutes a technical revision. The major changes that have been made between the first and the second edition are : Capacitance and tan measurements, d.c. line resistance o
32、r voltage drop at rated current, impulse voltage, passive flammability, current overload, solvent resistance of marking, component solvent resistance and active flammability have been added to Clause 4, test and measurement procedures. 60939-2 IEC:2005(E) 5 The text of this standard is based on the
33、following documents: FDIS Report on voting 40/1510/FDIS 40/1537/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60939 consi
34、sts of the following parts, under the general title Passive filter units for electromagnetic interference suppression Part 1: Generic specification Part 2: Sectional specification: Test methods and general requirements Part 2-1: Blank detail specification Passive filter units for electromagnetic int
35、erference suppression Filters for which safety tests are required (Assessment level D / DZ) Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (Safety tests only) The committee has decided that the conten
36、ts of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilin
37、gual version of this publication may be issued at a later date. 6 60939-2 IEC:2005(E) PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION Part 2: Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements 1 General 1.1 Scop
38、e This Sectional specification applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. Th
39、is implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety t
40、ests are required. This Sectional specification applies to passive filter units which will be connected to an a.c. mains or other supply with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 000 V d.c. 1.2 Normative references The following referenced
41、 documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Components other than inductors and capacitors in the filter unit sh
42、ould fulfil requirements in the relevant IEC Standard. IEC 60060-1, High-voltage test techniques Part 1: General definitions and test requirements IEC 60062, Marking codes for resistors and capacitors IEC 60068-1, Environmental testing Part 1: General and guidance IEC 60068-2-17, Basic environmental
43、 testing procedures Part 2: Tests Test Q: Sealing IEC 60085, Thermal evaluation and classification of electrical insulation IEC 60335-1, Safety of household and similar electrical appliances Part 1: General requirements IEC 60384-9, Fixed capacitors for use in electronic equipment Part 9: Sectional
44、specification: Fixed capacitors of ceramic dielectric, Class 2 IEC 60384-14, Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains 60939-2 IEC:2005(E) 7 IEC 60664 (all parts)
45、, Insulation coordination for equipment within low-voltage systems IEC 60938-1, Fixed inductors for electromagnetic interference suppression Part 1: Generic specification IEC 60939-1, Passive filter units for electromagnetic interference suppression Part 1: Generic specification IEC 60940, Guidance
46、information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression IEC 61140, Protection against electric shock Common aspects for installation and equipment 1.3 Information to be given in a detail specification 1.3.1 General The detail sp
47、ecifications shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements are included, they shall be listed in 1.9 of the detail specificat
48、ion, and indicated in the test schedules, for example by an asterisk. NOTE The information given in 1.3.2 may, for convenience, be presented in tabular form. The following information shall be given in each detail specification and the values quoted shall preferably be selected from the appropriate
49、clause of this sectional specification. 1.3.2 Outline drawing and dimensions There shall be an illustration of the filter as an aid to easy recognition and for comparison of the filter with others. Dimensions and their associated tolerances, which affect inter- changeability and mounting, shall be given in the detail specification. All dimensions shall preferably be stated in
