1、 IEC 60684-3-280 Edition 1.1 2013-12 CONSOLIDATED VERSION VERSION CONSOLIDE Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking Gaines isolantes souples Partie 3: Spcifications pour types particuliers de
2、gaines Feuille 280: Gaines thermortractables, en polyolfine, anti-cheminement IEC60684-3-280:2010+A1:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or util
3、ized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining addition
4、al rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par au
5、cun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez le
6、s coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leadi
7、ng global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigen
8、da or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn p
9、ublications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic
10、and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback o
11、n this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llect
12、ronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - ww
13、w.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished R
14、estez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient p
15、lus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publica
16、tion ou si vous avez des questions contactez-nous: csciec.ch. IEC 60684-3-280 Edition 1.1 2013-12 CONSOLIDATED VERSION VERSION CONSOLIDE Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking Gaines isolante
17、s souples Partie 3: Spcifications pour types particuliers de gaines Feuille 280: Gaines thermortractables, en polyolfine, anti-cheminement INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.035.20 ISBN 978-2-8322-1312-4 Registered trademark of the Internation
18、al Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinsideIEC 60684-3-
19、280 Edition 1.1 2013-12 REDLINE VERSION VERSION REDLINE Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking Gaines isolantes souples Partie 3: Spcifications pour types particuliers de gaines Feuille 280:
20、Gaines thermortractables, en polyolfine, anti-cheminement IEC60684-3-280:2010+A1:2013 colourinside 2 60684-3-280 IEC:2010+A1:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 INTRODUCTION TO THE AMENDMENT 6 1 Scope . 7 2 Normative references . 7 3 Designation 8 4 Conditions of test . 8 5 Requirements . 8
21、6 Sleeving conformance 8 Annex A (informative) Guidance on the available sizes and wall thicknesses . 12 Table 1 Property requirements . 9 Table 2 Requirements for dielectric strength 10 Table 3 Resistance to selected fluids . 10 Table 4 Additional property requirements . 11 Table A.1 Guidance on th
22、e available sizes and wall thicknesses 12 60684-3-280 IEC:2010+A1:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FLEXIBLE INSULATING SLEEVING Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking FOREWORD 1) The International Elect
23、rotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.
24、To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nat
25、ional Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (
26、ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation
27、 from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot b
28、e held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. A
29、ny divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access
30、to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individ
31、ual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, th
32、is IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of th
33、is IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This Consolidated version of IEC 60684-3-280 bears the edition number 1.1. It consists of the first edition (2010) documents 15/562/FDIS and 15/585/RVD and its ame
34、ndment 1 (2013) documents 15/686/CDV and 15/703/RVC. The technical content is identical to the base edition and its amendment. In this Redline version, a vertical line in the margin shows where the technical content is modified by amendment 1. Additions and deletions are displayed in red, with delet
35、ions being struck through. A separate Final version with all changes accepted is available in this publication. This publication has been prepared for user convenience. 4 60684-3-280 IEC:2010+A1:2013 International Standard IEC 60684-3-280 has been prepared by IEC technical committee 15: Solid electr
36、ical insulating materials. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60684 series, published under the general title Flexible insulating sleeving, can be found on the IEC website. The committee has decided that the content
37、s of the base publication and its amendment will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amen
38、ded. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 60684-3-280 IEC:2010+A1:2013 5 INTRO
39、DUCTION This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1) Part 2: Methods of test (IEC 60684-2) Part 3: Specifications for individual typ
40、es of sleeving (IEC 60684-3) This standard comprises one of the sheets of Part 3 as follows: Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking 6 60684-3-280 IEC:2010+A1:2013 INTRODUCTION TO THE AMENDMENT This amendment changes the test method for resistance to weathering since it is quo
41、ted incorrectly as ISO 4892-3 method 1 .This method does not exist in the 2006 edition of ISO 4892-3. Also after consulting with users of these types of sleevings, it was decided that a period of 3 000 hours exposure to this method was adequate. 60684-3-280 IEC:2010+A1:2013 7 FLEXIBLE INSULATING SLE
42、EVING Part 3: Specifications for individual types of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking 1 Scope This part of IEC 60684 gives the requirements for heat-shrinkable, polyolefin sleeving, anti-tracking with a nominal shrink ratio of 3:1. This sleeving has been found
43、suitable for use at temperatures up to 100 C. Typically: medium wall, internal diameter up to 110 mm. These sleevings are normally supplied in the colours red or brown. Since these types of sleevings cover a significantly large range of sizes and wall thicknesses, Table A.1 in this standard provides
44、 guidance on the range of sizes available. The actual size shall be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual
45、requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance must be proven as part of the assembly. Examples of this are described in HD 629
46、and IEC 60502 series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC
47、60296:2003, Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 60502 (all parts), Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) IEC 60684-1:2003, Flexible insula
48、ting sleeving Part 1: Definitions and general requirements IEC 60684-2:1997, Flexible insulating sleeving Part 2: Methods of test Amendment 1 (2003) Amendment 2 (2005) IEC 60757:1983, Code for designation of colours ISO 846:1997, Plastics Evaluation of the action of micro-organisms 8 60684-3-280 IEC
49、:2010+A1:2013 ISO 4892-3:2006, Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps HD 629, Test requirements on accessories for use on power cables of rated voltages from 3,6/6(7,2)kV up to 20,8/36 (42)kV Part 1: Cables with extruded insulation 3 Designation The sleeving shall be identified by the following designation: Description IEC publication nu
