1、 IEC 60603-7-2 Edition 2.0 2010-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz Connecteurs pour quipements lectroniques Partie 7-
2、2: Spcification particulire pour les fiches et les embases non blindes 8 voies pour la transmission de donnes des frquences jusqu 100 MHz IEC 60603-7-2:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of thi
3、s publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or h
4、ave an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise s
5、ous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmenta
6、ires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is t
7、he leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a
8、corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publication
9、s. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electr
10、ical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this pu
11、blication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes
12、internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir
13、 t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retire
14、s ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire e
15、n ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/
16、custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60603-7-2 Edition 2.0 2010-04 INTERNATIONAL STANDARD NO
17、RME INTERNATIONALE Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz Connecteurs pour quipements lectroniques Partie 7-2: Spcification particulire pour les fiches et les embases n
18、on blindes 8 voies pour la transmission de donnes des frquences jusqu 100 MHz INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 31.220.10 PRICE CODE CODE PRIX ISBN 978-2-88910-229-7 Registered trademark of the International Electrotechnical Commission Marque
19、dpose de la Commission Electrotechnique Internationale 2 60603-7-2 IEC:2010 CONTENTS FOREWORD.4 INTRODUCTION.6 1 General 7 1.1 Scope7 1.2 Normative references 7 2 Terms and definitions .8 3 Common features and isometric view .8 4 Cable terminations and internal connections Fixed and free connectors
20、8 5 Gauges 8 6 Characteristics .8 6.1 General .8 6.2 Pin and pair grouping assignment. 8 6.3 Classification into climatic category.8 6.4 Electrical characteristics8 6.4.1 Creepage and clearance distances8 6.4.2 Voltage proof.8 6.4.3 Current-temperature derating 9 6.4.4 Initial contact resistance Int
21、erface only (separable fixed and free contact) .9 6.4.5 Input to output d.c. resistance .9 6.4.6 Input to output d.c. resistance unbalance.9 6.4.7 Initial insulation resistance 9 6.4.8 Transfer impedance.9 6.4.9 Coupling attenuation9 6.5 Transmission characteristics .9 6.5.1 General .9 6.5.2 Inserti
22、on loss.9 6.5.3 Return loss10 6.5.4 Propagation delay .10 6.5.5 Delay skew10 6.5.6 NEXT 10 6.5.7 Power sum NEXT (for information only) .10 6.5.8 FEXT.10 6.5.9 Power sum FEXT (for information only) .11 6.5.10 Transverse conversion 11 6.5.11 Transverse conversion transfer .11 6.6 Mechanical11 7 Tests
23、and test schedule11 7.1 General .11 7.2 Arrangement for contact resistance test: .11 7.3 Arrangement for vibration test .11 7.4 Test procedures and measuring methods 11 7.5 Preconditioning .12 7.6 Wiring and mounting of specimens 12 7.6.1 Wiring12 7.6.2 Mounting .12 60603-7-2 IEC:2010 3 7.7 Test sch
24、edules 12 7.7.1 Basic (minimum) test schedule 12 7.7.2 Full test schedule 12 Bibliography14 Table 1 Test Group EP 13 4 60603-7-2 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, f
25、or data transmissions with frequencies up to 100 MHz FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operati
26、on on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “I
27、EC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this prepar
28、ation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consen
29、sus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts ar
30、e made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications tr
31、ansparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independen
32、t certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liabil
33、ity shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (includ
34、ing legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of t
35、his publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60603-7-2 has been prepared by subcommittee 48B
36、: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This second edition of IEC 60603-7-2 cancels and replaces the first edition issued in 2007, and constitutes a technical revision. The main technical changes with regard to th
37、e previous edition are as follows: Removal of test methods that are now referenced to IEC 60512-27-100. Addition of TCL and TCTL requirements. Removal of the electrical, mechanical, dimensional, environmental conditioning tests by reference to IEC 60603-7. 60603-7-2 IEC:2010 5 The text of this stand
38、ard is based on the following documents: FDIS Report on voting 48B/2135/FDIS 48B/2176/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, P
39、art 2. A list of all parts of IEC 60603 series, under the general title Connectors for electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webs
40、tore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60603-7-2 IEC:2010 INTRODUCTION IEC 60603-7 is the base specification of the whole series. Subsequent specifications do not duplica
41、te information given in the base document, but list only additional requirements. For complete specification regarding a component of a higher number document all lower numbered documents shall be considered as well. The following diagram shows the interrelation of the documents: Indicates reference
42、 for transmission performance (backward compatibility) Indicates reference for dimensions, mechanical and electrical characteristics, tests and test schedules. Unshielded Shielded 3 MHz 100 MHz 250 MHz 600 MHz IEC 60603-7 IEC 60603-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500 MHz
43、IEC 60603-7-41 IEC 60603-7-51 1 000 MHz IEC 60603-7-71 IEC 60603-7-2 60603-7-2 IEC:2010 7 CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz 1 General 1.1 Scope This part of IEC 60
44、603 covers 8-way, unshielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7, and specifies electrical transmission requirements for frequencies up to 100 MHz. These connectors are typically used as category 5 conn
45、ectors in class D cabling systems specified in ISO/IEC IS 11801. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors. NOTE Transmission p
46、erformance categories: in this IEC standard, the term “category”, when used in reference to transmission performance, refers to those categories defined by ISO/IEC 11801. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated ref
47、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60512-1-100, Connectors for electronic equipment Part 1-100: General Applicable publications IEC 60512-2-1, Connectors for electronic equipment Tests
48、 and measurements Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contact resistance Millivolt level method IEC 60512-27-100, Connectors for electronic equipment Tests and measurements Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors Tests 27a
49、to 27g 1IEC 60603-7:2008, Connectors for electronic equipment Part 7: Detail specification for 8- way, unshielded, free and fixed connectors IEC 61156 (all parts): Multi-core and symmetrical pair/quad cables for digital communications IEC 62153-4-12: 2009, Metallic communication cable test methods Part 4-12: Electromagnetic compatibility (EMC) Coupling attenuation or sc
