1、 IEC 60384-4 Edition 5.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 4: Sectional specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte Condensateurs fixes utiliss dans les quipements lectroni
2、ques Partie 4: Spcification intermdiaire Condensateurs lectrolytiques laluminium, lectrolyte solide (MnO 2 ) et non solide IEC 60384-4:2016-08(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publi
3、cation may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an
4、enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous que
5、lque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cett
6、e publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commi
7、ssion (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the la
8、test edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available
9、 for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just
10、 Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms c
11、ontaining 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted fro
12、m the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance,
13、please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos
14、des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements b
15、ibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisa
16、nt diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publica
17、tions parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additio
18、nnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres
19、 antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60384-4 Edition 5.0 2016-08 INTERNATIONAL STANDARD NORME INT
20、ERNATIONALE Fixed capacitors for use in electronic equipment Part 4: Sectional specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte Condensateurs fixes utiliss dans les quipements lectroniques Partie 4: Spcification intermdiaire Condensateurs lectrolyti
21、ques laluminium, lectrolyte solide (MnO 2 ) et non solide INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.060.50 ISBN 978-2-8322-3552-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Int
22、ernationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60384-4:2016 IEC 2016 CONTENTS FOREWORD . 6 1 General . 8 1.1 Scope . 8 1.2 Object . 8 1.3 Normativ
23、e references 8 1.4 Information to be given in a detail specification 9 1.4.1 General . 9 1.4.2 Outline drawing and dimensions . 9 1.4.3 Mounting 9 1.4.4 Ratings and characteristics 9 1.4.5 Marking . 10 1.5 Terms and definitions 10 1.6 Marking . 10 1.6.1 General . 10 1.6.2 Information for marking 10
24、1.6.3 Marking on capacitors 11 1.6.4 Marking on packaging 11 2 Preferred ratings and characteristics 11 2.1 Preferred characteristics . 11 2.2 Preferred values of ratings 11 2.2.1 Nominal capacitance (C N ) 11 2.2.2 Tolerance on nominal capacitance 12 2.2.3 Rated voltage (U R ) 12 2.2.4 Category vol
25、tage (U C ) 12 2.2.5 Ripple voltage 12 2.2.6 Reverse voltage . 12 2.2.7 Surge voltage ratio . 12 2.2.8 Rated ripple current . 12 3 Quality assessment procedures . 13 3.1 Primary stage of manufacture 13 3.2 Structurally similar components . 13 3.3 Certified test records of released lots 13 3.4 Qualif
26、ication approval (QA) procedures . 13 3.4.1 General . 13 3.4.2 Qualification approval on the basis of the fixed sample size procedure 13 3.4.3 Tests . 14 3.5 Quality conformance inspection . 26 3.5.1 Formation of inspection lots 26 3.5.2 Test schedule 26 3.5.3 Delayed delivery 26 3.5.4 Assessment le
27、vels . 26 4 Test and measurement procedures 27 4.1 Pre-conditioning (for non-solid electrolyte capacitors only) . 27 4.2 Visual examination and check of dimensions . 28 4.2.1 General . 28 4.2.2 Visual examination and check of dimensions 28 IEC 60384-4:2016 IEC 2016 3 4.2.3 Requirements 28 4.3 Electr
28、ical tests 28 4.3.1 Leakage current . 28 4.3.2 Capacitance . 28 4.3.3 Tangent of loss angle (tan ) or equivalent series resistance (ESR) 29 4.3.4 Impedance (if required) 29 4.3.5 Insulation resistance of the external insulation (if required) . 30 4.3.6 Voltage proof of the external insulation (if re
29、quired) 30 4.4 Robustness of terminations . 31 4.4.1 General . 31 4.4.2 Initial inspection . 31 4.4.3 Final inspection 31 4.5 Resistance to soldering heat . 31 4.5.1 General . 31 4.5.2 Test conditions 31 4.5.3 Recovery . 31 4.5.4 Final inspection and requirements 31 4.6 Solderability 31 4.6.1 Genera
30、l . 31 4.6.2 Test conditions 31 4.6.3 Final inspection 32 4.7 Rapid change of temperature 32 4.7.1 General . 32 4.7.2 Initial inspection . 32 4.7.3 Test conditions 32 4.7.4 Recovery . 32 4.7.5 Final inspections and requirements 32 4.8 Vibration . 32 4.8.1 General . 32 4.8.2 Test conditions 32 4.8.3
31、Final inspections and requirements 33 4.9 Bump (if required) . 33 4.9.1 General . 33 4.9.2 Test conditions 33 4.9.3 Final inspections and requirements 33 4.10 Shock (if required) . 33 4.10.1 General . 33 4.10.2 Test conditions 33 4.10.3 Final inspections and requirements 34 4.11 Climatic sequence .
32、34 4.11.1 General . 34 4.11.2 Initial inspection . 34 4.11.3 Dry heat . 34 4.11.4 Damp heat, cyclic, test Db, first cycle . 34 4.11.5 Cold . 34 4.11.6 Low air pressure (if required) 34 4.11.7 Damp heat, cyclic, test Db, remaining cycles 35 4.11.8 Sealing (if required) . 35 4.11.9 Final inspections a
33、nd requirements 35 4 IEC 60384-4:2016 IEC 2016 4.12 Damp heat, steady state 35 4.12.1 General . 35 4.12.2 Initial inspection . 35 4.12.3 Test conditions 35 4.12.4 Recovery . 35 4.12.5 Final inspections and requirements 35 4.13 Endurance 36 4.13.1 General . 36 4.13.2 Initial inspection . 36 4.13.3 Te
34、st conditions 36 4.13.4 Recovery . 36 4.13.5 Final inspections and requirements 36 4.14 Surge voltage 36 4.14.1 General . 36 4.14.2 Initial inspection . 36 4.14.3 Test conditions 37 4.14.4 Recovery . 37 4.14.5 Final inspections and requirements 37 4.15 Reverse voltage (if required) . 37 4.15.1 Initi
35、al inspection . 37 4.15.2 Test conditions 37 4.15.3 Recovery . 38 4.15.4 Final inspections and requirements 38 4.16 Pressure relief (if required) 38 4.17 Storage at high temperature 38 4.17.1 General . 38 4.17.2 Initial inspection . 38 4.17.3 Test conditions 38 4.17.4 Recovery . 38 4.17.5 Final insp
36、ections and requirements 38 4.18 Storage at low temperature (if required) . 38 4.18.1 General . 38 4.18.2 Initial inspection . 38 4.18.3 Test conditions 38 4.18.4 Recovery . 38 4.18.5 Final inspections and requirements 39 4.19 Characteristics at high and low temperature . 39 4.19.1 General . 39 4.19
37、.2 Inspections and requirements . 39 4.20 Charge and discharge (if required) 39 4.20.1 General . 39 4.20.2 Initial inspection . 39 4.20.3 Test conditions 39 4.20.4 Final inspections and requirements 39 4.21 High surge current (if required) 40 4.21.1 General . 40 4.21.2 Final inspections and requirem
38、ents 40 4.22 Voltage transient overload (if required) 40 4.22.1 General . 40 IEC 60384-4:2016 IEC 2016 5 4.22.2 Initial inspection . 40 4.22.3 Final inspections and requirements 40 Bibliography . 41 Table 1 Preferred values of tolerances . 12 Table 2 Sampling plan for qualification approval, assessm
39、ent level EZ 15 Table 3 Test schedule for qualification approval (1 of 10) 16 Table 4 Lot-by-lot inspection 27 Table 5 Periodic inspection 27 Table 6 Amplitude and acceleration options 33 Table 7 Preferred severities . 34 6 IEC 60384-4:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED
40、CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4: Sectional specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national ele
41、ctrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specif
42、ications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internati
43、onal, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal
44、 decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for
45、international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)
46、In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall
47、be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certific
48、ation bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury
49、, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of thi
