1、 IEC 60384-21 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 21: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Condensateurs fixes utiliss dans les quipements lectroniques Partie
2、 21: Spcification intermdiaire Condensateurs multicouches fixes dilectriques en cramique pour montage en surface, de Classe 1 IEC60384-21:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry
4、 about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque fo
5、rme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette
6、 publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading glo
7、bal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Pu
9、blished: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms con
10、taining more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or n
11、eed further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationale
12、s pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Cata
13、logue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces
14、. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au mon
15、de de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custs
16、erv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60384-21 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATION
17、ALE Fixed capacitors for use in electronic equipment Part 21: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Condensateurs fixes utiliss dans les quipements lectroniques Partie 21: Spcification intermdiaire Condensateurs multicouches fixes dilectriqu
18、es en cramique pour montage en surface, de Classe 1 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 31.060.10 PRICE CODE CODE PRIX ISBN 978-2-88912-822-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele
19、ctrotechnique Internationale 2 60384-21 IEC:2011 CONTENTS FOREWORD . 5 1 General 7 1.1 Scope 7 1.2 Object . 7 1.3 Normative references 7 1.4 Information to be given in a detail specification . 7 1.4.1 Outline drawing and dimensions 8 1.4.2 Mounting . 8 1.4.3 Rating and characteristics . 8 1.4.4 Mark
20、ing . 9 1.5 Terms and definitions 9 1.6 Marking . 10 1.6.1 Information for marking 10 1.6.2 Marking on the body 10 1.6.3 Requirements for marking 10 1.6.4 Marking of the packaging . 10 1.6.5 Additional marking . 10 2 Preferred ratings and characteristics 10 2.1 Preferred characteristics . 10 2.1.1 P
21、referred climatic categories . 10 2.2 Preferred values of ratings 11 2.2.1 Rated temperature (TR) . 11 2.2.2 Rated voltage (UR) 11 2.2.3 Category voltage (UC) . 11 2.2.4 Preferred values of nominal capacitance and associated tolerance values . 11 2.2.5 Temperature coefficient () . 12 2.2.6 Dimension
22、s . 14 3 Quality assessment procedures 14 3.1 Primary stage of manufacture 14 3.2 Structurally similar components . 14 3.3 Certified records of released lots . 14 3.4 Qualification approval 14 3.4.1 Qualification approval on the basis of the fixed sample size procedures 14 3.4.2 Tests . 15 3.5 Quali
23、ty conformance inspection . 19 3.5.1 Formation of inspection lots . 19 3.5.2 Schedule . 20 3.5.3 Delayed delivery 20 3.5.4 Assessment levels . 20 4 Test and measurement procedures . 21 4.1 Preliminary drying . 21 4.2 Measuring conditions 22 4.3 Mounting . 22 4.4 Visual examination and check of dimen
24、sions . 22 4.4.1 Visual examination 22 60384-21 IEC:2011 3 4.4.2 Requirements 22 4.5 Electrical tests . 24 4.5.1 Capacitance 24 4.5.2 Tangent of loss angle (tan ) . 24 4.5.3 Insulation resistance 24 4.5.4 Voltage proof . 25 4.6 Temperature coefficient () and temperature cycle drift . 26 4.6.1 Prelim
25、inary drying 26 4.6.2 Measuring conditions . 26 4.6.3 Requirements 26 4.7 Shear test . 26 4.8 Substrate bending test 27 4.8.1 Initial measurement . 27 4.8.2 Final inspection . 27 4.9 Resistance to soldering heat . 27 4.9.1 Initial measurement . 27 4.9.2 Test conditions 27 4.9.3 Recovery . 28 4.9.4 F
26、inal inspection, measurements and requirements 28 4.10 Solderability 29 4.10.1 Test conditions 29 4.10.2 Recovery . 30 4.10.3 Final inspection, measurements and requirements 30 4.11 Rapid change of temperature 30 4.11.1 Initial measurement . 30 4.11.2 Number of cycles . 30 4.11.3 Recovery . 30 4.11.
27、4 Final inspection, measurements and requirements 30 4.12 Climatic sequence . 31 4.12.1 Initial measurement . 31 4.12.2 Dry heat 31 4.12.3 Damp heat, cyclic, Test Db, first cycle . 31 4.12.4 Cold 31 4.12.5 Damp heat, cyclic, Test Db, remaining cycles 31 4.12.6 Final inspection, measurements and requ
28、irements 31 4.13 Damp heat, steady state 32 4.13.1 Initial measurement . 32 4.13.2 Conditions of test 32 4.13.3 Recovery . 33 4.13.4 Final inspection, measurements and requirements 33 4.14 Endurance . 33 4.14.1 Initial measurement . 33 4.14.2 Conditions of test 33 4.14.3 Recovery . 34 4.14.4 Final i
29、nspection, measurements and requirements 34 4.15 Robustness of terminations (only for capacitors with strip termination) 34 4.15.1 Test conditions 34 4.15.2 Final inspection and requirements . 34 4.16 Component solvent resistance (if required) 35 4 60384-21 IEC:2011 4.17 Solvent resistance of the ma
30、rking (if required) . 35 4.18 Accelerated damp heat, steady state (if required) 35 4.18.1 Initial measurement . 35 4.18.2 Conditioning 35 4.18.3 Recovery . 36 4.18.4 Final measurements 36 Annex A (normative) Guidance for the specification and coding of dimensions of fixed surface mount multilayer ca
31、pacitors of ceramic dielectric, Class 1 37 Annex B (informative) Combination of temperature coefficient and tolerance for the reference temperature of 25 C . 38 Bibliography 39 Figure 1 Fault: crack or fissure 22 Figure 2 Fault: crack or fissure 22 Figure 3 Separation or delamination 23 Figure 4 Exp
32、osed electrodes 23 Figure 5 Principal faces . 23 Figure 6 Reflow temperature profile . 28 Figure A.1 Dimensions . 37 Table 1 Preferred tolerance on nominal capacitance 11 Table 2 Nominal temperature coefficient and tolerance 12 Table 3 Combination of temperature coefficient and tolerance . 13 Table
33、4 Fixed sample size test plan for qualification approval Assessment level EZ 16 Table 5 Tests schedule for qualification approval . 17 Table 6a Lot-by-lot inspection 21 Table 6b Periodic tests 21 Table 7 Tangent of loss angle limits . 24 Table 8 Test voltages. 26 Table 9 Temperature cyclic drift lim
34、its 26 Table 10 Reflow temperature profiles for Sn-Ag-Cu alloy . 28 Table 11 Maximum capacitance change . 29 Table 12 Maximum capacitance change . 31 Table 13 Number of damp heat cycles . 31 Table 14 Final inspection measurements and requirements . 32 Table 15 Test conditions for damp heat, steady s
35、tate . 32 Table 16 Final inspection measurements and requirements . 33 Table 17 Endurance test conditions (UC= UR) . 33 Table 18 Endurance test conditions (UC UR) . 34 Table 19 Final inspection measurements and requirements . 34 Table 20 Initial requirements 35 Table 21 Conditioning 35 Table B.1 Com
36、bination of temperature coefficient and tolerance for the reference temperature of 25 C 38 60384-21 IEC:2011 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 21: Sectional specification Fixed surface mount multilayer capacitors of ceramic dielectric
37、, Class 1 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizat
38、ion in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is e
39、ntrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Int
40、ernational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects sinc
41、e each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content
42、of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible i
43、n their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity as
44、sessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, em
45、ployees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of
46、the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to th
47、e possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-21 has been prepared by IEC technical committee 40: Capacitors and resistors for elec
48、tronic equipment. This second edition cancels and replaces the first edition published in 2004 and contains the following significant technical changes with respect to the previous edition: The test voltage of 1,2 URat UR 1 000 V has been added in 4.5.4 Voltage proof. Detail test conditions have bee
49、n added in 4.7 Shear test and 4.8 Substrate bending test. Test conditions applying lead free solder alloy (Sn-Ag-Cu) have been included in 4.9 Resistance to soldering heat and 4.10 Solderability. A selection of the test conditions according to marketing needs have been stated in 4.13 Damp heat, steady state. The dimensions of 0402 M in Annex A have been ad
