1、 IEC 60384-2 Edition 4.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 2: Sectional specification Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors Condensateurs fixes utiliss dans les quipements lectroniques Parti
2、e 2: Spcification intermdiaire Condensateurs fixes pour courant continu dilectrique en film de trphtalate de polythylne mtallis IEC60384-2:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication
3、 may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquir
4、y about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque f
5、orme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cett
6、e publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading gl
7、obal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、 an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just P
9、ublished: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms co
10、ntaining more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or
11、need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes international
12、es pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Cat
13、alogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplace
14、s. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au mo
15、nde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/cust
16、serv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60384-2 Edition 4.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATION
17、ALE Fixed capacitors for use in electronic equipment Part 2: Sectional specification Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors Condensateurs fixes utiliss dans les quipements lectroniques Partie 2: Spcification intermdiaire Condensateurs fixes pour courant continu d
18、ilectrique en film de trphtalate de polythylne mtallis INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 31.060.30 PRICE CODE CODE PRIX ISBN 978-2-88912-828-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission
19、Electrotechnique Internationale 2 60384-2 IEC:2011 CONTENTS FOREWORD . 4 1 General 6 1.1 Scope 6 1.2 Object . 6 1.3 Normative references 6 1.4 Information to be given in a detail specification . 6 1.5 Terms and definitions 7 1.6 Marking . 8 2 Preferred ratings and characteristics 9 2.1 Preferred cha
20、racteristics . 9 2.2 Preferred values of ratings 9 3 Quality assessment procedures 10 3.1 Primary stage of manufacture 10 3.2 Structurally similar components . 10 3.3 Certified records of released lots . 10 3.4 Qualification approval 10 3.5 Quality conformance inspection . 17 4 Test and measurement
21、procedures . 19 4.1 Visual examination and check of dimensions . 19 4.2 Electrical tests . 19 4.3 Robustness of terminations . 22 4.4 Resistance to soldering heat . 22 4.5 Solderability 22 4.6 Rapid change of the temperature 23 4.7 Vibration 23 4.8 Bump 23 4.9 Shock 24 4.10 Climatic sequence . 24 4.
22、11 Damp heat, steady state 25 4.12 Endurance . 26 4.13 Charge and discharge . 26 4.14 Component solvent resistance . 27 4.15 Solvent resistance of the marking 27 Bibliography 28 Table 1 Sampling plan together with numbers of permissible non-conformance for qualification approval test . 12 Table 2 Te
23、st schedule for qualification approval. 13 Table 3 Lot-by-lot inspection 18 Table 4 Periodic inspection 19 Table 5 Test points and voltages . 19 Table 6 Tangent of loss angle requirements . 20 Table 7 Insulation resistance requirements 21 Table 8 Correction factors 22 Table 9 Preferred severities .
24、24 60384-2 IEC:2011 3 Table 10 Test conditions 26 Table 11 Lead spacing . 27 4 60384-2 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 2: Sectional specification Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors FOR
25、EWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the el
26、ectrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to t
27、echnical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Or
28、ganization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each techni
29、cal committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Public
30、ations is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their natio
31、nal and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment serv
32、ices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, serv
33、ants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicati
34、on, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility
35、 that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-2 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipme
36、nt. This fourth edition cancels and replaces the third edition published in 2005 and contains the following significant technical changes with respect to the previous edition. Table 1, Sampling plan together with numbers of permissible non-conformance for qualification approval test, has been adjust
37、ed. Table 3, Lot-by-lot inspection, has been changed, highlighting assessment level EZ only. Table 4, Periodic inspection, has been changed, highlighting assessment level EZ only. The preferred values of rated voltages have been updated in conformance with the basic series of preferred values R5 and
38、 R10 given in ISO 3. 60384-2 IEC:2011 5 The text of this standard is based on the following documents: FDIS Report on voting 40/2129/FDIS 40/2142/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication h
39、as been drafted in accordance with the ISO/IEC directives, Part 2. A list of all the parts of the IEC 60384 series, under the general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain u
40、nchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60384-2 IEC:2011 FIXED CAPACITORS FOR USE IN ELECT
41、RONIC EQUIPMENT Part 2: Sectional specification Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors 1 General 1.1 Scope This part of IEC 60384 applies to fixed capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in elect
42、ronic equipment. These capacitors may have “self-healing properties” depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application a
43、nd Grade 2 for general application. Capacitors for electromagnetic interference suppression and surface mount fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors are not included, but are covered by IEC 60384-14 and IEC 60384-19 respectively. 1.2 Object The object of this sta
44、ndard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods, and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specif
45、ications referring to this sectional specification should be of equal or higher performance level, because lower performance levels are not permitted. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the ed
46、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60384-1:2008, Fixed capacitors for use in electronic equipment
47、 Part 1: General specification IEC 61193-2:2007, Quality assessment systems Part 2: Selection and use of sampling plans for inspection of electronic components and packages ISO 3:1973, Preferred numbers Series of preferred numbers 1.4 Information to be given in a detail specification Detail specific
48、ations shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements are included, they shall be 60384-2 IEC:2011 7 listed in 1.9 of the deta
49、il specification and indicated in the test schedules, for example by an asterisk. NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form. The following information shall be given in each detail specification and the values quoted shall preferably be selected from those given in the appropriate clause of this sectional specification
