1、 IEC 60216-8 Edition 1.0 2013-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrical insulating materials Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures Matriaux isolants lectriques Proprits dendurance thermique Part
2、ie 8: Instructions pour le calcul des caractristiques dendurance thermique en utilisant des procdures simplifies IEC 60216-8:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reprod
3、uced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtain
4、ing additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce so
5、it et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication,
6、 utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC)
7、is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition
8、, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and
9、 withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of
10、 electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us you
11、r feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llect
12、ricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publicati
13、ons CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/jus
14、tpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. I
15、l contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur c
16、ette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60216-8 Edition 1.0 2013-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrical insulating materials Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified p
17、rocedures Matriaux isolants lectriques Proprits dendurance thermique Partie 8: Instructions pour le calcul des caractristiques dendurance thermique en utilisant des procdures simplifies INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 17.220.99; 29.035.01 PR
18、ICE CODE CODE PRIX ISBN 978-2-83220-679-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vou
19、s avez obtenu cette publication via un distributeur agr. 2 60216-8 IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations 7 3.1 Terms and definitions 7 3.2 Symbols and abbreviations 8 4 Thermal endurance test procedure .
20、 9 4.1 General . 9 4.2 Number of test specimens . 9 4.3 Preparation of test specimens . 10 4.4 Preparation of ageing processes . 11 5 Simplified numerical and graphical evaluation procedures 12 5.1 Outline description of procedures 12 5.2 Simplified calculation procedures 13 5.2.1 Validity of simpli
21、fied calculations . 13 5.2.2 Times to end-point . 13 5.2.3 Calculation of the regression line . 14 5.2.4 Calculation of deviation from linearity 15 5.2.5 Temperature index and halving interval . 15 5.3 Data rescue . 16 5.4 Determination of RTI . 16 5.5 Test report 18 Bibliography 19 Figure 1 Determi
22、nation of the time to reach the end-point at each temperature Property variation (according to IEC 60216-1) . 14 Figure 2 Thermal endurance graph Temperature index Halving interval . 16 Figure 3 Thermal endurance graph Relative temperature index . 17 Table 1 Suggested exposure temperatures and times
23、 for TI corresponding to 20 000 h . 12 60216-8 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICAL INSULATING MATERIALS THERMAL ENDURANCE PROPERTIES Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures FOREWORD 1) The International Electrot
24、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To
25、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation
26、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (IS
27、O) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation f
28、rom all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be
29、held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any
30、 divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to
31、 IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individua
32、l experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this
33、 IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this
34、 IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60216-8 has been prepared by IEC technical committee 112: Evaluation and qualification of electrical insulating materials and systems. The
35、 text of this standard is based on the following documents: FDIS Report on voting 112/236/FDIS 112/244/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/
36、IEC Directives, Part 2. 4 60216-8 IEC:2013 A list of all parts in the IEC 60216 series, published under the general title Electrical insulating materials Thermal endurance properties, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchang
37、ed until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60216-8 IEC:2013 5 INTRODUCTION The designation thermal en
38、durance is used here to refer to the test of thermal stress in air, excluding any other influence or stress applied to the test specimens. Thermal endurance properties evaluated in different environments and/or with different stresses applied to the test specimens require different test procedures.
39、In this part of IEC 60216, the study of the thermal ageing of materials is based solely on the change in certain properties resulting from a period of exposure to elevated temperature. The properties studied are always measured after the temperature has returned to ambient. Properties of materials c
40、hange at various rates on thermal ageing. To enable comparisons to be made of the thermal ageing of different materials, the criteria for judgment depend on the type of property to be studied and its acceptable limiting value. 6 60216-8 IEC:2013 ELECTRICAL INSULATING MATERIALS THERMAL ENDURANCE PROP
41、ERTIES Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures 1 Scope This part of IEC 60216 specifies the general ageing conditions and simplified procedures to be used for deriving thermal endurance characteristics, which are shown by temperature index (
42、TI) and/or relative temperature index (RTI) and the halving interval (HIC). The procedures specify the principles for evaluating the thermal endurance properties of materials exposed to elevated temperature for long periods. In the application of this standard, it is assumed that a practically linea
43、r relationship exists between the logarithm of the time required to cause the predetermined property change and the reciprocal of the corresponding absolute temperature (Arrhenius relationship). For the valid application of the standard, no transition, in particular no first-order transition should
44、occur in the temperature range under study. Throughout the rest of this standard the designation “insulating materials“ is always taken to mean “insulating materials and simple combinations of such materials“. 2 Normative references The following documents, in whole or in part, are normatively refer
45、enced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60085, Electrical insulation Thermal evaluation and designation IEC 60
46、216-1:2013, Electrical insulating materials Thermal endurance properties Part 1: Ageing procedures and evaluation of test results 1IEC 60216-2, Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials -
47、Choice of test criteria IEC 60216-3, Electrical insulating materials Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics IEC 60216-4-1, Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens Single-chamber ovens 1A sixth ed
48、ition is due to be published shortly. 60216-8 IEC:2013 7 IEC 60216-5, Electrical insulating materials Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material ISO 291, Plastics Standard atmospheres for conditioning and testing 3 Terms, de
49、finitions, symbols and abbreviations For the purposes of this document, the following terms, definitions, symbols and abbreviations apply. 3.1 Terms and definitions 3.1.1 temperature index TI numerical value of the temperature in degrees Celsius derived from the thermal endurance relationship at a time of 20 000 h (or other specified time) 3.1.2 halving interval HIC numeri
