1、NORME CE1 INTERNATIONALE INTERNATIONAL STANDARD I EC 169-27 Premire dition First edition 1994-02 Connecteurs pour frquences radiolectriques - Partie 27: Connecteurs coaxiaux pour frquences radiolectriques verrouillage vis pour usage typique dans les systmes de distribution par cbles 75 ohms (type E)
2、 Radio-frequency connectors - Part 27: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E) Numro de rfrence Reference number CEMEC 169-27: 1994 Numros des publications Depuis le ler janvier 1997, les publications de la CE1 sont num
3、rotes partir de 60000. Publications consolides Les versions consolides de certaines publications de la CE1 incorporant les amendements sont disponibles. Par exemple, les numros ddition 1.0, 1.1 et 1.2 indiquent respectivement la publication de base, la publication de base incorporant lamendement 1,
4、et la publication de base incorporant les amendements 1 et 2. Validit de la prsente publication Le contenu technique des publications de la CE1 est constamment revu par la CE1 afin quil reflte ltat actuel de la technique. Des renseignements relatifs la date de reconfirmation de la publication sont d
5、isponibles dans le Catalogue de la CEI. Les renseignements relatifs des questions ltude et des travaux en cours entrepris par le comit technique qui a tabli cette publication, ainsi que la liste des publications tablies, se trouvent dans les documents ci- dessous: Site web de la CEI Catalogue des pu
6、blications de la CE1 Publi annuellement et mis jour rgulirement (Catalogue en ligne) Disponible la fois au sur la page de titre. Numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. Consolidated publications Consolidated versions of some IEC public
7、ations including amendments are available. For example, edition numbers 1 .O, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Validity of this publication The technical content of IEC
8、publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. Information on the subjects under consideration and work in progress underta
9、ken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web site Catalogue of IEC publications Published yearly with regular updates (On-line catalogue)* Available both at the IEC web site* and a
10、s a printed periodical IEC Bulletin Terminology, graphical and letter symbols For general terminology, readers are referred to I EC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols and signs approved by the IEC for general use, readers are referred to
11、 publications IEC 60027: fetter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols for diagrams. * See web site address on title page. NORME INTERNATIONALE INTERNATIONAL S
12、TANDARD CE1 IEC 169127 Premire dition First edition 1994-02 Connecteurs pour frquences radiolectriques - Partie 27: Connecteurs coaxiaux pour frquences radiolectriques verrouillage a vis pour usage typique dans les systmes de distribution par cbles 75 ohms (type E) Radio-frequency connectors - Part
13、27: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E) 0 CE1 1994 Droits de reproduction rservs - Copyright - all rights reserved Aucune partie de ?iie publication ne peut tre reproduite ni utilise sous quelque forme que ? soa cd
14、par aucun pro- c8d, lectronique ou mcanique. y conpris b photocopie et les microfilms, sans iamrd Bai de 1dieur. No pad of this publicaticm may be reproduced or utlized in any form or by any means, electronic or mechanical. includmg ptmtocqying and microfihn. without permission in writing from the p
15、ublimher. Bureau Centrai de la Commission Electrotechnique Internationale 3, rue de Varemb Genve. Suisse Commission Electrotechnique Internationale CODE PRIX International Electrotechnical Commission PRICE CODE H Mewwapomaa 3newrpoewecnaa HOMHCCMII 0 Pour pix, voir caraiogue en vigueur For price, se
16、e current catalogue -2- SOMMAIRE Pages AVANT-PROPOS . 4 Articles 1 Gnralits . 1.1 Domaine dapplication . 1.2 Rfrence normative 2 Dsignation de type CE1 . 3 Description des connecteurs . 4 Dimensions des dtails de la face daccouplement . 5 Calibres mcaniques 5.1 5.2 Calibre dinterface de la fiche mle
17、 . Calibres pour le contact central de la prise 6 6 6 6 6 8 12 12 14 1 69-27 O I EC : 1 994 -3- CONTENTS FOREWORD Claw General . 1.1 Scope . 1.2 Normative reference . IEC type designation . Dimensions - Mating face details Mechanical gauges . 5.1 5.2 Description of connectors Plug connector interfac
18、e gauge . Gauging of socketcentre contact Page 5 7 7 7 7 7 9 13 13 15 -4- 169-27 O CEI:1994 DIS 46D(BC)24 COMMISSION ELECTROTECHNIQUE INTERNATIONALE CONNECTEURS POUR FRQUENCES RADIOLECTRIQUES - Rapport de vote 46D(BC)214 Partie 27: Connecteurs coaxiaux pour frquences radiolectriques verrouillage vis
19、 pour usage typique dans les systmes de distribution par cbles 75 ohms (type E) AVANT-PROPOS La CE1 (Commission Electrotechnique Internationale) est une organisation mondiale de normalisation compose de iensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CE1 a pour objet
20、 de favoriser h coopration internationale pour toutes les questions de normaiiition dans lec domaines de llectricit et de llectronique. A cet effet, la CEI, entre autres activits, publie des Normes internationales. Leur laboration est confib des comits dtudes, aux travaux desquels tout Comit nationa
21、l intress par le sujet traM peut participer. Les organisations internationales, gouvernementales et non gouvernementales. en liaison avec la CEI, parupent gaiement aux travaux. La CE1 collabore troitement avec lOrganisation Intemationale de Normalisation (ISO), selon des conditions fixes par accord
22、entre les deux organisations. Les dcisions ou accords officiels de la CE1 en ce qui concerne les questions techniques, prpars par les comits dtudes o sont reprsents tous les Comits nationaux sintressant ces questions, expriment dans la plus grande mesure possible un accord international sur les suje
23、ts examins. Ces dcisions constituent des recommandations internationales publii sous fome de normes, de rapports techniques ou de guides et agres comme telles par les Comits nationaux. Dans le but dencourager lunification internationale, lec Comi* nationaux de la CE1 sengagent appliquer de faon tran
24、sparente, dans toute la mesure possible, les Normes internationales de la CE1 dans leurs normes nationales et r6gionales. Toute divergence entre la norme de la CE1 et la nonne nationale ou rgionale correspondante doit tre indique en termes dairs dans cette dernire. La Norme internationale CE1 169-27
25、 a t tablie par le sous-comit 46D: Connecteurs pour frquences radiolectriques, du comit dtudes 46 de la CEI: Cbles, fils, guides dondes, connecteurs et accessoires pour communications et signalisation. Le texte de cette norme est issu des documents suivants: Le rapport de vote indiqu dans le tableau
26、 ci-dessus donne toute information sur le vote ayant abouti Iapprobation de cette norme. Cette norme doit tre utilise conjointement avec la CE1 11 69-1 169-270 IEC:1994 -5- INTERNATIONAL ELECTROTECHNICAL COMMISSION RADIO-FREQUENCY CONNECTORS - Part 27: Radio-frequency coaxial connectors with screw c
27、oupling, typically for use in 75 ohms cable distribution systems (type E) FOREWORD i) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national eisctrotechnicai committees (IEC National Committees). The object of the IEC is to promote
28、 international cooperation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in
29、 the subject deait with may participate in this preparatory work Intemational, governmental and m-govemmental organizations liiing with the IEC also participate in this preparation. The IEC collaborates ciosely with the International Organization for Standardization (ISO) in accordance with conditio
30、ns determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on which all the National Committees having a special interest therein are represented, exprese, as nearly as possible, an international c
31、onsensus of opinion on the subjects dealt with. 3) They have the form of recommendations for intemational use published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unicatbn, IEC National Co
32、mmittees undertake to apply IEC International Standards transparently to the maximum exlent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be deatiy indicated in the latter. international Standard I
33、EC 169-27 has been prepared by subcommittee 46D: R.F. connectors, of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors, and accessories for communication and signalling. The text of this standard is based on the following documents: DIS I Report on voting 46D(C0)24 46D(C0)214 Fu
34、ll information on the voting for the approval of this part can be found in the report on voting indicated in the above table. This standard shaii be read in conjunction with IEC 1169-1. -6- 1 69-27 O CE1 1994 CONNECTEURS POUR FRQUENCES RADIOLECTRIQUES - Partie 27: Connecteurs coaxiaux pour frquences
35、 radiolectriques verrouillage vis pour usage typique dans les systmes de distribution par cbles 75 ohms (type E) 1 Gnralit& 1 . 1 Domaine dapplication Cette norme dfinit des connecteurs coaxiaux pour frquences radiolectriques qui sont destins tre utiliss de faon typique dans les systmes de distribut
36、ion par cble 75 R avec une varit de cbles souples, mais qui peuvent galement tre employs la fois dans des systmes adapts et dans des systmes non adapts. Lorsquils sont utiliss dans des systmes adapts, ces connecteurs sont prvus pour des applications jusqu 3 GHz. Ces connecteurs sont gnralement prvus
37、 pour des montages permanents et pour des applications avec des accouplements et dsaccouplements peu frquents. Cette norme dfinit seulement les dimensions de linterface et des calibres. 1.2 Rfrence normative Le document normatif suivant contient des dispositions qui, par suite de la rfrence qui y es
38、t faite, constitue des dispositions valables pour la prsente partie de la CE1 169. Au moment de la publication, les ditions indiques taient en vigueur. Tout document normatif est sujet rvision et les parties prenantes aux accords fonds sur la prsente partie de la CE1 169 sont invites rechercher la p
39、ossibilit dappliquer les ditions les plus rcentes des documents normatifs indiqus ci-aprs. Les membres de la CE1 et de IISO possdent le registre des Normes internationales en vigueur. IS0 370: 1975, Dimensions tolrances - Conversions dinches en millimtres et rciproquement. 2 Dsignation de type CE1 L
40、es connecteurs conformes cette norme doivent tre dsigns par la rfrence cette norme, CE1 169-27. 3 Description des connecteurs Ce type de connecteur a un verrouillage vis avec un filetage M 14 x 1. Normalement, la partie mle du connecteur est une fiche, et la partie femelle une embase. La conception
41、de la fiche peut tre telle que le conducteur intrieur du cble serve de contact mle, ou que le contact central mle soit indpendant du conducteur intrieur du cble. Le contact femelle doit accepter des contacts mles ayant un diamtre de 0,58 - 2,lO mm (0,023 - 0,083 in). ATTENTION: Du fait dune possible
42、 dformation mcanique permanente du contact femelle, des prcautions doivent tre prises lors du passage de gros contacts mles (2,lO mm - 0,083 in) des contacts mles plus petits (038 mm - 0,023 in). La conception de lembase permet de conserver ladaptation quelque soit le diamtre sur dilectrique du cble
43、 entre 3,71 mm (0,146 in) et 9,30 mm (0,366 in). 169-270 IEC:1994 -7- RADIO-FREQUENCY CONNECTORS - Part 27: Radio-f requency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E) 1 General 1.1 Scope This standard specifies radio-frequency coaxial co
44、nnectors which are typically for use in 75 Q cable distribution systems with a variety of flexible cables, but which may also be used in both matched and unmatched applications. When they are used in matched systems, these connectors are intended for applications up to 3 GHz. These connectors are in
45、 general intended for permanent mounting and for use with infrequent engagement and separation. This standard only specifies interface dimensions and gauges. 1.2 Normative reference The following normative document contains provisions which, through reference in this text, constitute provisions of t
46、his part of IEC 169. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 169 are encouraged to investigate the possibility of applying the most recent editions of the normative documents i
47、ndicated below. Members of IEC and IS0 maintain registers of cunently valid International Standards. IS0 370: 1975, Tolerance dimensions - Conversion from inches into millimetres and vice versa. 2 IEC type designation Connectors conforming to this standard shall be designated by reference to this st
48、andard, IEC 169-27. 3 Description of connectors This type of connector has screw locking with M 14 x 1 thread. Normally, the plug will be a free connector, the socket a fixed connector. The design of the plug may feature either the inner conductor of the cable as the pin contact, or a separate centr
49、e-pin contact independent of the cable inner conductor. The female contact shall accept male contacts with a diameter range of O,% - 2,lO mm (0,023 - 0,083 in). CAUTION: Care should be taken when replacing larger diameter pin contacts (2,lO mm - 0,083 in) with smaller diameter pin contacts (0,s mm - 0,023 i