1、 IEC 60115-9-1 Edition 1.0 2003-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ Rsistances fixes utilises dans les qui
2、pements lectroniques Partie 9-1: Spcification particulire cadre: Rseaux de rsistances fixes monts en surface avec des rsistances mesurables individuellement Niveau dassurance EZ IEC 60115-9-1:2003 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2003 IEC, Geneva, Switzerland All rights reserved. Un
3、less otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you hav
4、e any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publica
5、tion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si v
6、ous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch
7、 About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant r
8、eview by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technic
9、al committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electrop
10、edia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Custo
11、mer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore
12、et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou
13、amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publicat
14、ions remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dic
15、tionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - we
16、bstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60115-9-1 Edition 1.0 2003-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed resistors for use in electronic equipment Part 9-1: Blank detail specificat
17、ion: Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ Rsistances fixes utilises dans les quipements lectroniques Partie 9-1: Spcification particulire cadre: Rseaux de rsistances fixes monts en surface avec des rsistances mesurables individuellement Niv
18、eau dassurance EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE L ICS 31.040.10 PRICE CODE CODE PRIX ISBN 978-2-83220-351-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warni
19、ng! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60115-9-1 IEC:2003 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT Part 9-1:
20、 Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Natio
21、nal Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Public
22、ly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governm
23、ental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on
24、technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted
25、by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international u
26、niformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
27、 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its direc
28、tors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
29、 out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is dra
30、wn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60115-9-1 has been prepared by IEC technical committee 40: Capacitors and resistors
31、 for electronic equipment. This bilingual version (2012-09) corresponds to the monolingual English version, published in 2003-10. The text of this standard is based on the following documents: FDIS Report on voting 40/1345/FDIS 40/1367/RVD Full information on the voting for the approval of this stan
32、dard can be found in the report on voting indicated in the above table. 60115-9-1 IEC:2003 3 The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publicati
33、on will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60115-9-1 IEC:2003 INTRODUCTION Bl
34、ank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in acc
35、ordance with IEC specifications nor shall they be so described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into account. The numbers between square brackets on the first page of the detail specification correspond to the following inf
36、ormation which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission“ or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the det
37、ail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the resistor network 5 A short description of the type of re
38、sistor network. 6 Information on typical construction (when applicable). 7 Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail
39、specification. 8 Application or group of applications covered and/or assessment level. 9 Reference data on the most important properties, to allow comparison between the various resistor network types. 60115-9-1 IEC:2003 5 1 IEC 60115-9-1-XXX 2 QC 400701XXXXXX ELECTRONIC COMPONENTS OF ASSESSED QUALI
40、TY IN ACCORDANCE WITH: 3 IEC 60115-9-1 4 QC 400701 FIXED SURFACE MOUNT RESISTOR NETWORKS WITH 5 INDIVIDUALLY MEASURABLE RESISTORS Outline drawing: (see Table 1) (. angle projection) 7 (Other shapes are permitted within the dimensions given) 6 Assessment level: EZ 8 NOTE For 1 to 9: see previous page
41、. 9 Information on the availability of components qualified to this detail specification is given in the IEC QC 001005 6 60115-9-1 IEC:2003 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resisto
42、rs Assessment level EZ 1 General data 1.1 Dimensions, ratings and characteristics Table 1 Styles related to dimensions, ratings and characteristics Style Rated element dissipation at 70 C a)W Rated network dissipation at 70 C W Limiting element voltage (DC or AC r.m.s.) V Insulation voltage against
43、ambient V Insulation voltage between neighbouring resistors V Dimensions mm L W T A B P a)The detail specification shall specify the conditions under which the rated dissipation applies. Resistance range 1 to Tolerances on rated resistance % Climatic category / / / Stability class % Limits for chang
44、e of resistance: for long-term tests ( %R + ) for short-term tests ( %R + ) Temperature coefficient : 10 6 /K _ 1The preferred values are those of the E24 and E96 series of IEC 60063. 60115-9-1 IEC:2003 7 1.1.1 Derating Resistors covered by this specification are derated according to the following c
45、urve: (A suitable curve to be included in the detail specification) NOTE See also 2.2.3 of the sectional specification. 1.2 Recommended method(s) of mounting (to be inserted) (See 1.4.2 of IEC 60115-9.) 1.3 Related documents Generic specification IEC 60115-1:1999, Fixed resistors for use in electron
46、ic equipment Part 1: Generic specification Sectional specification IEC 60115-9:2003, Fixed resistors for use in electronic equipment Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors 1.4 Marking The marking of the resistors and the package
47、shall be in accordance with the requirements of 2.4 of IEC 60115-1 and 1.4.5 of IEC 60115-9. The details of the marking of the component and packaging shall be given in full in the detail specification. 1.5 Ordering information Orders for resistors covered by this specification shall contain, in cle
48、ar or in coded form, the following minimum information: a) rated element resistance; b) tolerance on rated resistance; c) number and issue reference of the detail specification and style reference; d) packaging instructions. 1.6 Certified records of released lots Required/non required. 1.7 Additiona
49、l information (not for inspection purposes) 1.8 Additional or increased severities or requirements to those specified in the generic and/or sectional specification NOTE Additions or increased requirements should be specified only when essential. 8 60115-9-1 IEC:2003 2 Inspection requirements 2.1 Procedures 2.1.1 For qua
