1、 IEC 60068-2-83 Edition 1.0 2011-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Environmental testing Part 2-83: Tests Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste Essais denvironnement Partie 2-83: Essais
2、 Essai Tf: Essai de brasabilit des composants lectroniques pour les composants pour montage en surface (CMS) par la mthode de la balance de mouillage utilisant de la pte braser IEC 60068-2-83:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Un
3、less otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you hav
4、e any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publica
5、tion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si v
6、ous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The Internationa
7、l Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make s
8、ure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on proj
9、ects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading on
10、line dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you
11、wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation m
12、ondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente,
13、 un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations su
14、r les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.el
15、ectropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en lign
16、e. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60068-2-83 Edit
17、ion 1.0 2011-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Environmental testing Part 2-83: Tests Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste Essais denvironnement Partie 2-83: Essais Essai Tf: Essai de
18、brasabilit des composants lectroniques pour les composants pour montage en surface (CMS) par la mthode de la balance de mouillage utilisant de la pte braser INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 19.040; 31.190 PRICE CODE CODE PRIX ISBN 978-2-88912
19、-665-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60068-2-83 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 8 4 Test 9 4.1 General description
20、. 9 4.2 Test methods 9 5 Preconditioning 9 6 Preparation 10 6.1 Solder paste 10 6.2 Test jig plate . 10 6.3 Specimen holder . 10 7 Quick heating method . 10 7.1 Equipment . 10 7.2 Test jig plate . 11 7.3 Preparation . 12 7.4 Test condition 12 7.4.1 Test temperature . 12 7.4.2 Feed of solder paste an
21、d immersion condition . 13 7.4.3 Immersion and withdrawal conditions for test specimen . 14 7.5 Test procedure 14 7.6 Presentation of the result 15 7.7 Characterisation parameter examples . 15 8 Synchronous method 16 8.1 Equipment . 16 8.2 Test jig plate . 17 8.3 Synchronous fixture . 17 8.4 Prepara
22、tion . 17 8.5 Test condition 17 8.5.1 Test temperature . 17 8.5.2 Feed of solder paste and immersion condition . 17 8.5.3 Immersion and withdrawal conditions for the test specimen . 17 8.6 Test procedure 17 8.7 Presentation of the results . 18 8.8 Characterisation parameter examples . 19 9 Temperatu
23、re profile method 19 9.1 Equipment . 19 9.2 Test jig plate . 19 9.3 Preparation . 20 9.4 Test condition 20 9.4.1 Test temperature . 20 9.4.2 Feed of solder paste and immersion condition . 21 9.4.3 Immersion and withdrawal conditions for test specimen . 21 9.5 Test procedure 21 60068-2-83 IEC:2011 3
24、9.6 Presentation of the result 22 9.7 Characterisation parameter examples . 23 Annex A (normative) Equipment for the quick heating and synchronous method 24 Annex B (informative) Reading of the output data and correction of the result in the quick heating test 25 Annex C (normative) Test equipment f
25、or the temperature profile method . 28 Annex D (informative) Reading of the output data and correction of the result in the temperature profile test . 29 Annex E (informative) Caveats / Notes. 32 Bibliography 36 Figure 1 Examples of the quick heating method test equipment . 11 Figure 2 Example of te
26、st jig plate for quick heating and synchronous method 12 Figure 3 Example of the temperature profile. 13 Figure 4 Example of applying solder paste to a test jig plate 14 Figure 5 Typical output shape of signal in the quick heating method 15 Figure 6 Example of synchronous method test equipment 16 Fi
27、gure 7 Example of synchronous fixture . 17 Figure 8 Typical output shape of signal in the synchronous method . 18 Figure 9 Example of the system for temperature profile method test equipment . 19 Figure 10 Example of the temperature profile . 20 Figure 11 Example of applying solder paste to a test j
28、ig plate 22 Figure 12 Typical output shape of signal in the temperature profile method . 23 Figure B.1 Typical wetting force changes in quick heating method . 26 Figure B.2 Example of correction of the initial time of wetting (F ais larger than 0,5F 1,max ) . 27 Figure B.3 Example of correction of t
29、he initial time of wetting (F ais 0,5F 1,maxor less) . 27 Figure D.1 Typical output forms for profile temperature test . 30 Figure D.2 The case when an extruding force (1,1F maxor larger) is generated immediately after the beginning of wetting 31 Figure E.1 Explanation diagram of test procedure for
30、the quick heating method . 33 Figure E.2 Explanation diagram of test procedure for synchronous method 34 Figure E.3 Showing the wetting force (pull) of some solder pastes . 34 Figure E.4 Explanation diagram of the test procedure for the temperature profile method . 35 Table 1 Specification of the te
31、st jig plate for quick heating and synchronous method . 11 Table 2 Recommended test conditions of the quick heating and synchronous method for rectangular SMD 14 Table 3 Specification of the test jig plate of the temperature profile method . 20 Table 4 Recommended test conditions of the temperature
32、profile method for rectangular SMD . 21 4 60068-2-83 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENVIRONMENTAL TESTING Part 2-83: Tests Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste FOREWORD 1) The
33、 International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and
34、 electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical com
35、mittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization
36、for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committ
37、ee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is a
38、ccurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and reg
39、ional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, i
40、n some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or age
41、nts including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,
42、 or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 60068-2-83 has been prep
43、ared by IEC technical committee 91: Electronics assembly technology. The text of this standard is based on the following documents: FDIS Report on voting 91/975/FDIS 91/992/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the abov
44、e table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 60068-2-83 IEC:2011 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data r
45、elated to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60068-2-83 IEC:2011 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this
46、 document may involve the use of patents as indicated below. IEC takes no position concerning the evidence, validity and scope of patent rights. The holders of the patent rights have assured the IEC that they are willing to negotiate licences either free of charge or under reasonable and non-discrim
47、inatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of these patent rights are registered with IEC. Information may be obtained as indicated below. a) EU patent 0920488.4 “Synchronous test method for assessing soldering pastes” 1Gen3 Syste
48、ms LTD Unit B2 Armstrong Mall Farnborough GU14 0NR United Kingdom b) JP Patent 2630712 “Testing method of characteristics of solder paste and the equipment for the test” Malcom Co., Ltd 4-15-10 Honmachi, Shibuya-ku Tokyo, 151-0071 Japan c) Patent JP 3789041 “Solderability measuring apparatus” Patent
49、 JP 3552061 “Solderability tester and solderability test method” Patent JP 3498100 “Method and device for testing solderability and microcrucible for testing” Patent JP 3153884 “Measuring device for soldering performance of cream solder” Tarutin Kester Co., Ltd. 2-20-11 Yokokawa, Sumida-ku Tokyo, 130-0003 Japan d) Sony Corporation 1-7-1 Konan Minato-ku Tokyo 108-0075 Japan
