1、 IEC 60034-2-1 Edition 2.0 2014-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) Machines lectriques tournantes Partie 2-1: Mthodes normalises pour la dte
2、rmination des pertes et du rendement partir dessais ( lexclusion des machines pour vhicules de traction) IEC 60034-2-1:2014-06(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be re
3、produced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about ob
4、taining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que c
5、e soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, u
6、tilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is t
7、he leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a
8、corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS,
9、 Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - web
10、store.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more t
11、han 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted
12、 from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistan
13、ce, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A pro
14、pos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignemen
15、ts bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en uti
16、lisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles pub
17、lications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 lan
18、gues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. P
19、lus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60034-2-1 Edition 2.0 2014-06 INTERNATIO
20、NAL STANDARD NORME INTERNATIONALE Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) Machines lectriques tournantes Partie 2-1: Mthodes normalises pour la dtermination des pertes et du rendement partir d
21、essais ( lexclusion des machines pour vhicules de traction) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XD ICS 29.160 PRICE CODE CODE PRIX ISBN 978-2-8322-1606-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commissi
22、on Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60034-2-1:2014 IEC 2014 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative referenc
23、es 7 3 Terms and definitions 7 4 Symbols and abbreviations 12 4.1 Symbols 12 4.2 Additional subscripts . 13 5 Basic requirements 14 5.1 Direct and indirect efficiency determination . 14 5.2 Uncertainty . 15 5.3 Preferred methods and methods for customer-specific acceptance tests, field-tests or rout
24、ine-tests . 15 5.4 Power supply 15 5.4.1 Voltage 15 5.4.2 Frequency . 15 5.5 Instrumentation . 15 5.5.1 General . 15 5.5.2 Measuring instruments for electrical quantities 16 5.5.3 Torque measurement . 16 5.5.4 Speed and frequency measurement . 16 5.5.5 Temperature measurement 17 5.6 Units . 17 5.7 R
25、esistance 17 5.7.1 Test resistance 17 5.7.2 Winding temperature . 17 5.7.3 Correction to reference coolant temperature 18 5.8 State of the machine under test and test categories 18 5.9 Excitation circuit measurements 19 5.10 Ambient temperature during testing 19 6 Test methods for the determination
26、of the efficiency of induction machines . 19 6.1 Preferred testing methods . 19 6.1.1 General . 19 6.1.2 Method 2-1-1A Direct measurement of input and output 20 6.1.3 Method 2-1-1B Summation of losses, additional load losses according to the method of residual loss 21 6.1.4 Method 2-1-1C Summation o
27、f losses with additional load losses from assigned allowance . 28 6.2 Testing methods for field or routine-testing . 32 6.2.1 General . 32 6.2.2 Method 2-1-1D Dual supply back-to-back-test . 33 6.2.3 Method 2-1-1E Single supply back-to-back-test 34 6.2.4 Method 2-1-1F Summation of losses with additi
28、onal load losses determined by test with rotor removed and reverse rotation test 35 6.2.5 Method 2-1-1G Summation of losses with additional load losses determined by Eh-star method . 39 6.2.6 Method 2-1-1H Determination of efficiency by use of the equivalent circuit parameters 42 IEC 60034-2-1:2014
29、IEC 2014 3 7 Test methods for the determination of the efficiency of synchronous machines 47 7.1 Preferred testing methods . 47 7.1.1 General . 47 7.1.2 Method 2-1-2A Direct measurement of input and output 48 7.1.3 Method 2-1-2B Summation of separate losses with a rated load temperature test and a s
30、hort circuit test . 50 7.1.4 Method 2-1-2C Summation of separate losses without a full load test . 55 7.2 Testing methods for field or routine testing . 57 7.2.1 General . 57 7.2.2 Method 2-1-2D Dual supply back-to-back-test . 57 7.2.3 Method 2-1-2E Single supply back-to-back-test 58 7.2.4 Method 2-
31、1-2F Zero power factor test with excitation current from Potier-, ASA- or Swedish-diagram . 60 7.2.5 Method 2-1-2G Summation of separate losses with a load test without consideration of additional load losses 64 8 Test methods for the determination of the efficiency of d.c. machines 65 8.1 Testing m
32、ethods for field or routine testing . 65 8.1.1 General . 65 8.1.2 Method 2-1-3A Direct measurement of input and output 65 8.1.3 Method 2-1-3B Summation of losses with a load test and d.c. component of additional load losses from test 67 8.1.4 Method 2-1-3C Summation of losses with a load test and d.
33、c. component of additional load losses from assigned value 73 8.1.5 Method 2-1-3D Summation of losses without a load test . 75 8.1.6 Method 2-1-3E Single supply back-to-back test 77 Annex A (normative) Calculation of values for the Eh-star method . 80 Annex B (informative) Types of excitation system
34、s 83 Annex C (informative) Induction machine slip measurement. 84 Annex D (informative) Test report template for method 2-1-1B . 86 Bibliography 87 Figure 1 Sketch for torque measurement test . 20 Figure 2 Efficiency determination according to method 2-1-1A . 21 Figure 3 Efficiency determination acc
35、ording to method 2-1-1B . 22 Figure 4 Smoothing of the residual loss data 27 Figure 5 Efficiency determination according to method 2-1-1C . 29 Figure 6 Vector diagram for obtaining current vector from reduced voltage test 30 Figure 7 Assigned allowance for additional load losses P LL. 31 Figure 8 Ef
36、ficiency determination according to method 2-1-1D . 33 Figure 9 Sketch for dual supply back-to-back test 33 Figure 10 Efficiency determination according to method 2-1-1E . 34 Figure 11 Efficiency determination according to method 2-1-1F . 36 Figure 12 Efficiency determination according to method 2-1
37、-1G . 39 Figure 13 Eh-star test circuit 40 Figure 14 Induction machine, T-model with equivalent iron loss resistor 42 Figure 15 Efficiency determination according to method 2-1-1H . 43 Figure 16 Induction machines, reduced model for calculation . 46 4 IEC 60034-2-1:2014 IEC 2014 Figure 17 Sketch for
38、 torque measurement test . 49 Figure 18 Efficiency determination according to method 2-1-2A . 49 Figure 19 Efficiency determination according to method 2-1-2B . 50 Figure 20 Efficiency determination according to method 2-1-2C . 56 Figure 21 Efficiency determination according to method 2-1-2D . 57 Fi
39、gure 22 Sketch for dual supply back-to-back test ( M GM G , I If f = = ) . 58 Figure 23 Efficiency determination according to method 2-1-2E . 59 Figure 24 Single supply back-to-back test for synchronous machines 59 Figure 25 Efficiency determination according to method 2-1-2F . 60 Figure 26 Efficien
40、cy determination according to method 2-1-2G . 64 Figure 27 Sketch for torque measurement test . 66 Figure 28 Efficiency determination according to method 2-1-3A . 66 Figure 29 Efficiency determination according to method 2-1-3B . 67 Figure 30 Sketch for single supply back-to-back test for determinat
41、ion of d.c. component of additional load losses . 71 Figure 31 Efficiency determination according to method 2-1-3C . 73 Figure 32 Efficiency determination according to method 2-1-3D . 76 Figure 33 Efficiency determination according to method 2-1-3E . 78 Figure 34 Sketch for single supply back-to-bac
42、k test 78 Figure C.1 Slip measurement system block diagram 85 Table 1 Reference temperature 17 Table 2 Induction machines: preferred testing methods 20 Table 3 Induction machines: other methods . 32 Table 4 Synchronous machines with electrical excitation: preferred testing methods 48 Table 5 Synchro
43、nous machines with permanent magnets: preferred testing methods . 48 Table 6 Synchronous machines: other methods . 57 Table 7 DC machines: test methods . 65 Table 8 Multiplying factors for different speed ratios 74 IEC 60034-2-1:2014 IEC 2014 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ROTATING EL
44、ECTRICAL MACHINES Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees
45、 (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Repo
46、rts, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and n
47、on- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements
48、 of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and ar
49、e accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformit
