1、 IEC TS 62229 Edition 2.0 2017-05 TECHNICAL SPECIFICATION Multimedia systems and equipment Multimedia e-publishing and e-book Conceptual model for multimedia e-publishing IEC TS 62229:2017-05(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unl
2、ess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have
3、 any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211
4、Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content o
5、f IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC I
6、nternational Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical
7、 committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedi
8、a - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - s
9、td.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstor
10、e.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 62229 Edition 2.0 2017-05 TECHNICAL SPECIFICATION Multimedia systems and equipment Multimedia e-publishing and e-book Conceptual model for m
11、ultimedia e-publishing INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.080; 35.240.30 ISBN 978-2-8322-4281-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC TS 62229:2017 IEC 2017 CONTE
12、NTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Model for multimedia e-publishing 7 4.1 Contents creation/distribution model . 7 4.2 Multimedia data structure model . 7 4.3 E-book distribution model 8 4.3.1 General . 8 4.3.2 E-publishing market . 9 4.
13、3.3 Related data 9 4.4 Interfaces to e-book systems and equipment 9 4.4.1 General . 9 4.4.2 Operation and presentation . 10 4.4.3 E-paper . 10 4.4.4 Application program interface 10 5 Issues to be standardized 10 5.1 Data formats of multimedia e-book contents 10 5.2 Minimum requirements for multimed
14、ia e-book viewers 10 5.3 User interfaces for multimedia e-book viewers 11 5.4 E-publishing services 11 5.5 Guideline for e-book distribution by interchangeable storage media 11 5.6 Application specific e-books 11 Annex A (informative) Electronic dictionary 12 Annex B (informative) Electronic map and
15、 its application in e-book 13 Annex C (informative) Electronic newspaper 14 Annex D (informative) Digital comic . 15 D.1 Generic format 15 D.2 Readers format and other formats 15 Annex E (informative) Digital sheet music 16 Bibliography 17 Figure 1 Contents creation/distribution process 7 Figure 2 E
16、-book distribution model . 9 Figure B.1 Electronic map application in an e-book 13 IEC TS 62229:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MULTIMEDIA SYSTEMS AND EQUIPMENT MULTIMEDIA E-PUBLISHING AND E-BOOK CONCEPTUAL MODEL FOR MULTIMEDIA E-PUBLISHING FOREWORD 1) The International E
17、lectrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fiel
18、ds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
19、 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardizat
20、ion (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represent
21、ation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC can
22、not be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicatio
23、ns. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, ac
24、cess to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including in
25、dividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upo
26、n, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements
27、of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publicati
28、on of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreemen
29、t on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 62229, which is a technical specification, has been prepared by IEC technical committee 100: Audio, video and m
30、ultimedia systems and equipment. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. 4 IEC TS 62229:2017 IEC 2017 This edition includes the following significant technical changes with respect to the previous edition: a) Annexe
31、s D and E have been added; b) Clause 5.6 has been added. The text of this technical specification is based on the following documents: Enquiry draft Report on voting 100/2818/DTS 100/2870/RVDTS Full information on the voting for the approval of this technical specification can be found in the report
32、 on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the
33、data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC TS 62229:2017 IEC 2017 5 INTRODUCT
34、ION Enlarging the size of the international and domestic markets for multimedia e-publishing and e-books requires standardization of their related technology. As a first step to the discussion and standardization of the technology, a conceptual model for the technology should be established and stan
35、dardization issues should be clarified. The conceptual model includes all the e-publishing components and their functionality and clarifies the relationships between them. These clarifications are essential for the development of standards for e-publishing and e-book technology and are required by a
36、ssociated industries and users. 6 IEC TS 62229:2017 IEC 2017 MULTIMEDIA SYSTEMS AND EQUIPMENT MULTIMEDIA E-PUBLISHING AND E-BOOK CONCEPTUAL MODEL FOR MULTIMEDIA E-PUBLISHING 1 Scope This document describes a conceptual model for multimedia e-publishing and e-book. The conceptual model is specified f
37、rom the standardization point of view in order to clarify the functionality of e-publishing/e-book components and the relationships between them and to define e-publishing services. The model provides the key technology to be standardized in the e-publishing environment. The modelling is not intende
38、d for actual implementation of a system or system components for e-publishing. The modelling is expected to be used as a reference for discussing and developing new standardization work on multimedia e-publishing and e-books and, therefore, to contribute to the expansion of the international and dom
39、estic markets for multimedia e- publishing and e-book. The model is given as an example of the models for the multimedia data creation, data structure, equipment/system structure and user-system interface defined in IEC 61998. 2 Normative references The following documents are referred to in the tex
40、t in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61998:2015, Model and framework for standar
41、dization in multimedia equipment and systems ISO/IEC 19757-2:2008, Information technology Document Schema Definition Language (DSDL) Part 2: Regular-grammar-based validation RELAX NG Extensible Markup Language (XML) 1.0 (Third Edition), W3C Rec., 2004-02-04 NOTE Extensible Markup Language (XML) is a
42、 subset of ISO 8879:1986 (SGML) amended by its Technical Corrigendum 2. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: availab
43、le at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 multimedia e-publishing business model that produces, distributes and/or deals in multimedia e-books IEC TS 62229:2017 IEC 2017 7 3.2 multimedia e-book multimedia content consisting of texts, graph
44、ics, sounds and/or videos 3.3 data preparer organization or person that prepares an e-book Note 1 to entry An editor is an example of a preparer. See ISO 9660:1988. 3.4 publisher organization or person that issues and distributes an e-book 3.5 reading device equipment on which e-books are rendered a
45、nd presented 4 Model for multimedia e-publishing 4.1 Contents creation/distribution model Contents for e-publishing are created and distributed according to the process shown in Figure 1. Author Data preparer Publisher -(3) Reader IEC Key (1) Content data in submission format (2) Content data in gen
46、eric format (3) Content data in readers format Figure 1 Contents creation/distribution process Between the adjacent steps of the process, e-book content data are interchanged using the following formats. a) Submission format Submission formats depend on the functionality and capability of authors eq
47、uipment or data preparer. Standardization of the formats is required, in particular, by data preparers. An important functionality of the submission format is a support for proofreading mark-up to be interchanged between the author and the data preparer. b) Generic format Standardization of generic
48、formats is essential for interchanging e-book content data between the data preparer and the publisher. Some specifications for generic formats should be discussed and accepted as international standards. A support for proofreading is (or may be) also required for the generic format. c) Readers form
49、at Readers formats depend on the functionality and capability of readers equipment, such as PDA, PC, mobile phone or e-book specific equipment. Standardization for the formats will be required, in particular, for the readers benefit. 4.2 Multimedia data structure model Multimedia e-book content data in the formats given in 4.1 should have the following structures. 8 IEC TS 62229:2017 IEC 2017 a) Content data in submission format Content data in submission format should
