1、 IEC 63013 Edition 1.0 2017-06 INTERNATIONAL STANDARD NORME INTERNATIONALE LED packages Long-term luminous and radiant flux maintenance projection LED encapsules Projection long terme concernant la conservation du flux lumineux et du flux nergtique IEC 63013:2017-06(en-fr) THIS PUBLICATION IS COPYRI
2、GHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC
3、or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de r
4、eproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du
5、 demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax:
6、 +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicatio
7、ns The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliograp
8、hical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (referen
9、ce number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a m
10、onth by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV
11、) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Custome
12、r Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et p
13、ublie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement
14、 peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad
15、. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published -
16、webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectrique
17、s. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en angla
18、is et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publicati
19、on ou si vous avez des questions contactez-nous: csciec.ch. IEC 63013 Edition 1.0 2017-06 INTERNATIONAL STANDARD NORME INTERNATIONALE LED packages Long-term luminous and radiant flux maintenance projection LED encapsules Projection long terme concernant la conservation du flux lumineux et du flux ne
20、rgtique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.140.99 ISBN 978-2-8322-4487-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained t
21、his publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 63013:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Test method, data collectio
22、n and sample size 7 5 Long-term luminous flux maintenance projection methods . 7 5.1 General . 7 5.2 Exponential fit function (EFF) 7 5.2.1 Method 7 5.2.2 Criteria 7 5.3 Border function (BF) . 8 5.3.1 Method 8 5.3.2 Criteria 8 5.3.3 Calculating the test data slope and the BF slope . 8 6 Temperature
23、data interpolation 8 7 Adjustment of results . 8 8 Reporting. 9 Annex A (informative) Temperature acceleration Arrhenius method (TA-A) . 10 A.1 Method . 10 A.2 Criteria 10 Annex B (informative) Process flow chart . 11 Annex C (normative) Border function (BF) 12 Bibliography 14 Figure B.1 Process flo
24、w chart 11 Figure C.1 Three border functions 13 Table 1 Information to be included in the report . 9 Table C.1 Calculated -value for three border functions . 12 IEC 63013:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LED PACKAGES LONG-TERM LUMINOUS AND RADIANT FLUX MAINTENANCE PROJECTI
25、ON FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in
26、the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entruste
27、d to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Internati
28、onal Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each
29、 technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
30、 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in thei
31、r national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessme
32、nt services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employee
33、s, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the pu
34、blication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the poss
35、ibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63013 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and rela
36、ted equipment. The text of this International Standard is based on the following documents: FDIS Report on voting 34A/2008/FDIS 34A/2015/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document
37、 has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 63013:2017 IEC 2017 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific do
38、cument. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 63013:2017 IEC 2017 5 INTRODUCTION One of the benefits of LED lighting is their long lifetime compared to that of many other light source technologies. However, there is currently no int
39、ernational standard for predicting the long-term luminous flux maintenance of LED packages. This document is intended to close this gap by specifying methods for the long-term luminous flux maintenance projection. This document is the result of the discussions led by a special expert group within IE
40、C technical committee 34 on this topic. This expert group had collected a set of luminous flux maintenance measurements of 39 LED package types, each tested at three different temperatures. Various projection methods were analysed based on this set of test data. Regarding the selection of models, th
41、ere was a controversial discussion among the experts and no unanimous agreement could be found. It was concluded at the meeting in Berlin on 21 January 2014 to choose the TM-21 method as the starting point of the analysis and to have the border function as an alternative in case the TM-21 method was
42、 not applicable. It was further concluded that the Arrhenius temperature acceleration should be included in an informative annex. At the meeting on 26 January 2015 in Washington some further editorial improvements were made and it was agreed to submit this document to IEC as a new project with a vie
43、w to developing a full international standard. This new project was approved and all comments received during the enquiry stage were discussed by the project team and resolved. This document incorporates the changes agreed by the project team. 6 IEC 63013:2017 IEC 2017 LED PACKAGES LONG-TERM LUMINOU
44、S AND RADIANT FLUX MAINTENANCE PROJECTION 1 Scope This document is applicable to LED packages for general lighting services. It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the
45、 long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used. These projection methods employ data collected as per ANSI/I
46、ES LM-80-15 (LM-80). The long-term projection is based on the exponential-fit-function procedure of IES TM-21-11 (TM-21), and gives an alternative border function procedure in the case where the exponential-fit-function of IES TM-21-11 is not applicable. 2 Normative references The following document
47、s are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62504, General
48、lighting Light emitting diode (LED) products and related equipment Terms and definitions IES TM-21-11, Projecting Long Term Lumen Maintenance of LED Light Sources IES LM-80-08 1 , IES Approved Method for Measuring Lumen Maintenance of LED Light Sources ANSI/IES LM-80-15, IES Approved Method: Measuri
49、ng Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62504 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.
