1、 IEC 62642-4 Edition 1.0 2010-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Intrusion and hold-up systems Part 4: Warning devices Systmes dalarme Systmes dalarme contre lintrusion et les hold-up Partie 4: Dispositifs davertissement IEC 62642-4:2010 THIS PUBLICATION IS COPYRIGHT PROTEC
2、TED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs me
3、mber National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproductio
4、n rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du deman
5、deur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland
6、 Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC p
7、ublications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference num
8、ber, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also
9、 by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary on
10、line. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission
11、Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment r
12、evu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de
13、 rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications p
14、arues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles.
15、 Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec
16、.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62642-4 Edition 1.0 2010-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Intrusion and hold-up systems Part 4: Warning devices Systmes dalarme Systmes dalarme contre lintrusion et les hold-up Partie 4: Dispositifs davertissement INTERN
17、ATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 13.320 PRICE CODE CODE PRIX ISBN 978-2-88912-199-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62642-4 IEC:2010 CONTENTS FORE
18、WORD.5 INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Terms, definitions and abbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations 10 4 General considerations.10 5 Requirements.10 5.1 Functional .10 5.1.1 Response 10 5.1.2 Acoustic 12 5.1.3 Timing .12 5.2 Tamper13 5.2.1 Protection13 5.
19、2.2 Detection.13 5.3 Environmental .14 5.4 EMC14 5.5 Safety .14 5.6 Electrical .15 5.6.1 Connections 15 5.6.2 Operating parameters15 5.6.3 Self powered .15 5.7 Self test requirements .17 5.7.1 Local self test 17 5.7.2 Remote self test 17 5.8 Marking .18 5.9 Documentation 18 6 Test section18 6.1 Func
20、tional .18 6.1.1 General conditions 18 6.1.2 General mounting18 6.1.3 General testing procedures19 6.2 Reduced functional test.19 6.2.1 Purpose.19 6.2.2 Conditions .19 6.2.3 Mounting .19 6.2.4 Stimuli .19 6.2.5 Measurement.19 6.2.6 Pass/fail criteria.19 6.3 Response to events.19 6.3.1 Response to tr
21、igger command .19 6.3.2 Response to loss of trigger command interconnection integrity20 6.3.3 Maximum sound duration limit .20 6.4 Acoustic 21 6.4.1 Acoustic output level .21 62642-4 IEC:2010 3 6.5 Tamper22 6.5.1 Opening by normal means.22 6.5.2 Protection22 6.5.3 Detection of opening by normal mean
22、s 23 6.5.4 Detection of removal from mounting 24 6.5.5 Detection of penetration 24 6.6 Electrical tests.25 6.6.1 Operating voltage range and current consumption.25 6.6.2 Slow rise of remote power source voltage25 6.6.3 Remote power source voltage step change26 6.6.4 Storage device standby time26 6.6
23、.5 Storage device operating time .27 6.6.6 Storage device recharge rate.28 6.6.7 Loss of remote power 28 6.6.8 Remote power short circuit protection29 6.6.9 Storage device monitoring Low voltage.29 6.6.10 Storage device monitoring Failure 30 6.7 Marking .30 6.7.1 Purpose.30 6.7.2 Conditions .31 6.7.
24、3 Mounting .31 6.7.4 Stimuli .31 6.7.5 Measurement.31 6.7.6 Pass/fail criteria.31 6.8 Documentation 31 6.8.1 Purpose.31 6.8.2 Conditions .31 6.8.3 Mounting .31 6.8.4 Stimuli .31 6.8.5 Measurement.31 6.8.6 Pass/fail criteria.31 6.9 Environmental .31 6.9.1 Impact .31 6.9.2 Further environmental tests
25、.32 Annex A (normative) Sound level test for warning devices .34 Annex B (informative) Example remote test protocol.37 Bibliography38 Figure A.1 Suggested method of mounting.35 Figure A.2 Measurement positions Surface mounted devices36 Figure A.3 Measurement positions Pole mounted devices.36 Table 1
26、 Warning device functionality11 Table 2 Warning device responses 11 Table 3 Acoustic output levels .12 Table 4 Enclosure construction 13 Table 5 Tool dimension for tamper detection13 4 62642-4 IEC:2010 Table 6 Tamper detection 14 Table 7 Removal from mounting.14 Table 8 Storage device standby durati
27、on .16 Table 9 Recharge periods16 Table 10 Self test monitoring .17 Table 11 Environmental tests selection33 62642-4 IEC:2010 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ALARM SYSTEMS INTRUSION AND HOLD-UP SYSTEMS Part 4: Warning devices FOREWORD 1) The International Electrotechnical Commission (I
28、EC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in additi
29、on to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee intereste
30、d in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with
31、conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC
32、 National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for t
33、he way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between an
34、y IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformi
35、ty. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
36、of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or an
37、y other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may b
38、e the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62642-4 has been prepared by IEC technical committee 79: Alarm and electronic security systems. This standard is based on EN 50131-4 (2009). The text of this st
39、andard is based on the following documents: FDIS Report on voting 79/308/FDIS 79/319/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Pa
40、rt 2. 6 62642-4 IEC:2010 A list of all parts of the IEC 62642 series can be found, under the general title Alarm systems Intrusion and hold-up systems, on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability result date indicated
41、on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62642-4 IEC:2010 7 INTRODUCTION This part 4 of the IEC 62642 series of standard gives requiremen
42、ts for warning devices used in intrusion and hold-up alarm systems. The other parts of this series of standards are as follows: Part 1 System requirements Part 2-2 Intrusion detectors Passive infrared detectors Part 2-3 Intrusion detectors Microwave detectors Part 2-4 Intrusion detectors Combined pa
43、ssive infrared / microwave detectors Part 2-5 Intrusion detectors Combined passive infrared / ultrasonic detectors Part 2-6 Intrusion detectors Opening contacts (magnetic) Part 2-71 Intrusion detectors Glass break detectors Acoustic Part 2-72 Intrusion detectors Glass break detectors Passive Part 2-
44、73 Intrusion detectors Glass break detectors Active Part 3 Control and indicating equipment Part 4 Warning devices Part 5-3 Interconnections Requirements for equipment using radio frequency techniques Part 6 Power supplies Part 7 Application guidelines Part 8 Security fog devices/systems 8 62642-4 I
45、EC:2010 ALARM SYSTEMS INTRUSION AND HOLD-UP SYSTEMS Part 4: Warning devices 1 Scope This part of the IEC 62642 includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to e
46、ach of the four security grades given in IEC 62642-1. Requirements are also given for four environmental classes covering applications in internal and outdoor locations as specified in IEC 62599-1. 2 Normative references The following referenced documents are indispensable for the application of thi
47、s document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60065, Audio, video and similar electronic apparatus Safety requirements IEC 60068-1:1988, Environmental testing Part 1: Gen
48、eral and guidance IEC 60068-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60950-1, Information technology equipment Safety Part 1: General requirements IEC 61000-6-3, Electromagnetic compatibility (EMC) Part 6
49、-3: Generic standards Emission standard for residential, commercial and light-industrial environments IEC 61672-1 , Electroacoustics Sound level meters Part 1: Specifications IEC 62599-1, Alarm systems Part 1: Environmental test methods IEC 62599-2, Alarm systems Part 2: Electromagnetic compatibility Immunity requi
