1、 IEC 62642-2-73 Edition 1.0 2015-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Intrusion and hold-up systems Part 2-73: Intrusion detectors Glass break detectors (active) Systmes dalarme Systmes dalarme contre lintrusion et les hold-up Partie 2-73: Dtecteurs dintrusion Dtecteurs de br
2、is de glace (actifs) IEC 62642-2-73:2015-10(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, includi
3、ng photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
4、your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les
5、microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays
6、 de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards
7、for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.
8、ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advan
9、ced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Publis
10、hed details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15
11、 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some
12、entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Comm
13、ission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment
14、revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rappo
15、rts techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi
16、 des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electro
17、pedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IE
18、V) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CIS
19、PR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62642-2-73 Edition 1.0 2015-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Intrusion and hold-up systems Part
20、 2-73: Intrusion detectors Glass break detectors (active) Systmes dalarme Systmes dalarme contre lintrusion et les hold-up Partie 2-73: Dtecteurs dintrusion Dtecteurs de bris de glace (actifs) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 13.320 ISBN 978-2-
21、8322-2918-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publicatio
22、n via un distributeur agr. 2 IEC 62642-2-73:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviations . 8 3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Functional requirements 9 4.1 Event processing 9 4.2 Operational requiremen
23、ts 11 4.2.1 Time interval between intrusion signals or messages . 11 4.2.2 Switch on delay . 11 4.2.3 Self tests . 12 4.3 Detection 12 4.3.1 Detection performance. 12 4.3.2 Indication of detection 13 4.4 Immunity to false alarm sources 13 4.4.1 General . 13 4.4.2 Immunity to small objects hitting th
24、e glass . 13 4.4.3 Immunity to soft objects hitting the glass . 13 4.4.4 Immunity to hard objects hitting the glass 13 4.4.5 Immunity to static pressure 13 4.4.6 Immunity to dynamic pressure . 13 4.4.7 Immunity to wide band noise 13 4.5 Tamper security 13 4.5.1 General . 13 4.5.2 Resistance to and d
25、etection of unauthorised access to the inside of the detector through covers and existing holes 14 4.5.3 Detection of removal from the mounting surface 14 4.5.4 Detection of masking . 14 4.5.5 Immunity to magnetic field interference 15 4.6 Electrical requirements . 15 4.6.1 General . 15 4.6.2 Detect
26、or current consumption 15 4.6.3 Slow input voltage rise and voltage range limits . 15 4.6.4 Input voltage ripple 15 4.6.5 Input voltage step change 15 4.7 Environmental classification and conditions 15 4.7.1 Environmental classification. 15 4.7.2 Immunity to environmental conditions 15 5 Marking, id
27、entification and documentation . 16 5.1 Marking and/or identification . 16 5.2 Documentation 16 6 Testing 16 6.1 General . 16 6.2 General test conditions . 16 IEC 62642-2-73:2015 IEC 2015 3 6.2.1 Standard laboratory conditions for testing 16 6.2.2 General detection testing environment and procedures
28、 17 6.3 Basic detection test . 17 6.3.1 General . 17 6.3.2 Basic test source . 17 6.3.3 Basic detection test method . 18 6.4 Performance tests . 18 6.4.1 General . 18 6.4.2 Verification of detection performance . 18 6.4.3 Hole drilling with a diamond hole saw 19 6.4.4 Glass cutting . 20 6.5 Switch-o
29、n delay, time interval between signals, and indication of detection . 20 6.6 Fault condition signals or messages: self tests . 20 6.7 Tests of immunity to false alarm sources 21 6.7.1 General . 21 6.7.2 Immunity to small objects hitting the glass . 21 6.7.3 Immunity to soft objects hitting the glass
30、 . 22 6.7.4 Immunity to hard objects hitting the glass 22 6.7.5 Immunity to static pressure 23 6.7.6 Immunity to dynamic pressure . 23 6.7.7 Immunity to wide band noise based using flat steel rulers 24 6.7.8 Immunity to wide band noise based using ICs . 24 6.8 Tamper security 25 6.8.1 General . 25 6
31、.8.2 Prevention of unauthorised access to the inside of the detector through covers and existing holes 25 6.8.3 Detection of removal from the mounting surface 25 6.8.4 Resistance to magnetic field interference 25 6.8.5 Detection of masking . 25 6.9 Electrical tests 26 6.9.1 General . 26 6.9.2 Detect
32、or current consumption 26 6.9.3 Slow input voltage change and input voltage range limits 26 6.9.4 Input voltage ripple 27 6.9.5 Input voltage step change 27 6.9.6 Total loss of power supply . 27 6.10 Environmental classification and conditions 27 6.11 Marking, identification and documentation 29 6.1
33、1.1 Marking and/or identification 29 6.11.2 Documentation 29 Annex A (normative) Catalogue of standard glass types 30 Annex B (informative) List of small tools suitable for testing immunity of casing to attack 31 Annex C (normative) Dimensions and requirements of a standard test magnet 32 C.1 Refere
34、nce documents . 32 C.2 Requirements . 32 Annex D (normative) Immunity test: small objects hit sensitivity . 35 Annex E (normative) Immunity test: soft objects hit sensitivity 36 Annex F (normative) Immunity test: hard objects hit sensitivity 37 4 IEC 62642-2-73:2015 IEC 2015 Annex G (normative) Immu
35、nity test: static pressure sensitivity . 38 Annex H (normative) Immunity test: dynamic pressure sensitivity. 39 Annex I (normative) General testing matrix 40 Annex J (normative) Performance test setup and alternative performance test setup . 42 J.1 Performance test setup . 42 J.2 Alternative perform
36、ance test setup 43 Annex K (normative) Performance sensitivity test 45 Bibliography 46 Figure C.1 Test magnet Magnet type 1 . 33 Figure C.2 Test magnet Magnet type 2 . 34 Figure D.1 Immunity test setup for small object hit sensitivity . 35 Figure E.1 Immunity test setup for soft object hit sensitivi
37、ty . 36 Figure F.1 Immunity test setup for hard object hit sensitivity 37 Figure G.1 Immunity test setup for static pressure sensitivity . 38 Figure H.1 Immunity test setup for dynamic pressure sensitivity . 39 Figure J.1 Performance test setup . 42 Figure J.2 Alternative performance test setup 44 F
38、igure K.1 Combined sensor element surface mounted glass break detectors test setup 45 Figure K.2 Sender and receiver pair surface mounted glass break detectors test setup 45 Table 1 Events to be processed by grade 10 Table 2 Generation of Indication signals or messages 11 Table 3 Performance test re
39、quirements 12 Table 4 Tamper security requirements . 14 Table 5 Electrical requirements 15 Table 6 Wide band noise simulation based on flat steel rulers . 24 Table 7 Operational tests . 28 Table 8 Endurance tests 28 Table A.1 Standard glass types 30 Table J.1 Performance test matrix 43 Table J.2 Alt
40、ernative performance test matrix 43 IEC 62642-2-73:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ALARM SYSTEMS INTRUSION AND HOLD-UP SYSTEMS Part 2-73: Intrusion detectors Glass break detectors (active) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide orga
41、nization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,
42、 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
43、with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined b
44、y agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3
45、) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they ar
46、e used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and t
47、he corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsi
48、ble for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical commit
49、tees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication.
