1、 IEC 62586-1 Edition 2.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Power quality measurement in power supply systems Part 1: Power quality instruments (PQI) Mesure de la qualit de lalimentation dans les rseaux dalimentation Partie 1: Instruments de qualit de lalimentation (PQI) IEC 62586-1
2、:2017-05(en-fr) BASIC EMC PUBLICATION PUBLICATION FONDAMENTALE EN CEM colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
3、electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, ple
4、ase contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique
5、, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Com
6、it national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and p
7、ublishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publish
8、ed. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search
9、 - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all
10、new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with
11、 equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued sinc
12、e 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de
13、 lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est
14、 constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications tech
15、niques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Ell
16、e donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par e
17、mail. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique Internationa
18、l (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR
19、de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62586-1 Edition 2.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Power quality measurement in power supply systems Part
20、 1: Power quality instruments (PQI) Mesure de la qualit de lalimentation dans les rseaux dalimentation Partie 1: Instruments de qualit de lalimentation (PQI) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 17.220.20 ISBN 978-2-8322-4358-9 BASIC EMC PUBLICATIO
21、N PUBLICATION FONDAMENTALE EN CEM Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez o
22、btenu cette publication via un distributeur agr. colour inside 2 IEC 62586-1:2017 IEC 2017 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions, symbols and abbreviated terms 10 3.1 General definitions 10 3.2 Terms and definitions related to environments 11
23、3.3 Definitions related to uncertainty . 11 3.4 Notations 12 3.4.1 Functions . 12 3.4.2 Symbols and abbreviated terms . 12 3.4.3 Indices . 12 4 Environmental conditions . 13 4.1 General . 13 4.2 Environments FI1, FI2, FI1-H, FI2-H, FO and FO-H 14 4.3 Environments PI, PI-H, PO and PO-H . 15 4.4 Relat
24、ionship between ambient air temperature and relative humidity . 16 5 Ratings 17 5.1 Rated input energising voltages 17 5.2 Rated frequencies . 17 6 Design and construction 17 6.1 General . 17 6.2 General architecture . 17 6.3 Functions embedded in PQI-A and PQI-S . 18 6.3.1 PQI-A minimum functions d
25、efinition . 18 6.3.2 PQI-S minimum functions definition . 19 6.3.3 Summary of IEC 61000-4-30 requirements for functions 20 6.4 Additional requirements complementary to IEC 61000-4-30 21 6.4.1 Data to be provided for testing reasons . 21 6.4.2 Resolution of the presented data . 23 6.4.3 Clarification
26、 about “data flagging” 23 6.4.4 Temperature drift requirement within the rated range of operation for ambient air temperature . 23 6.5 Safety requirements 25 6.6 EMC requirements 25 6.6.1 Emissions 25 6.6.2 Immunity 25 6.7 Climatic requirements of PQI 25 6.8 Mechanical requirements 25 6.8.1 Product
27、mechanical robustness . 25 6.8.2 Enclosure robustness 25 6.9 Degree of protection by enclosures . 26 6.10 Start-up requirements . 26 IEC 62586-1:2017 IEC 2017 3 7 Marking and operating instructions 27 7.1 General . 27 7.2 Marking . 27 7.3 Operating instructions . 27 8 Functional, environmental and s
28、afety type tests. 27 8.1 General . 27 8.2 Reference conditions for type tests . 28 8.3 Safety tests . 28 8.4 EMC tests . 28 8.4.1 Emissions 28 8.4.2 Immunity 28 8.5 Climatic tests 29 8.6 Mechanical tests . 30 8.6.1 Product mechanical robustness . 30 8.6.2 Degree of protection provide by enclosures f
29、or electrical equipment against external mechanical impacts (IK code) 31 8.6.3 Degree of protection by enclosure (IP code) 31 8.7 Functional and uncertainty tests 31 9 Routine tests . 32 9.1 General . 32 9.2 Protective bonding test . 32 9.3 Dielectric strength test 32 9.4 Intrinsic uncertainty test
30、32 10 Declarations 32 11 Re-calibration and re-verification . 32 Annex A (informative) Information about environment “EMC environment G” and environment “EMC environment H” . 33 Bibliography 34 Figure 1 Instrument generic measurement chain 18 Figure 2 Uncertainty requirement as a function of tempera
31、ture 24 Figure A.1 Example for the situation inside a power station . 33 Table 1 Products coding table 13 Table 2 Definition of class A products 13 Table 3 Definition of class S products 13 Table 4 Description of FI1, FI2, FI1-H, FI2-H, FO, FO-H environments 15 Table 5 Description of PI, PI-H, PO an
32、d PO-H environments 16 Table 6 PQI-A functions . 19 Table 7 PQI-S minimum functions 20 Table 8 Summary of measurements requested for testing 22 Table 9 Uncertainty multipliers for different temperature ranges . 24 Table 10 Enclosure mechanical requirements 26 Table 11 Minimum IP requirements 26 4 IE
33、C 62586-1:2017 IEC 2017 Table 12 Characteristics specification template 27 Table 13 Reference conditions for testing 28 Table 14 Performance criteria applicable for EMC testing 29 Table 15 Climatic requirements 30 Table 16 Product mechanical requirements 31 IEC 62586-1:2017 IEC 2017 5 INTERNATIONAL
34、ELECTROTECHNICAL COMMISSION _ POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS Part 1: Power quality instruments (PQI) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Co
35、mmittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Ava
36、ilable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental
37、organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techni
38、cal matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC
39、 National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniform
40、ity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IE
41、C itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure
42、that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
43、nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refere
44、nced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Interna
45、tional Standard IEC 62586-1 has been prepared by IEC technical committee 85: Measuring equipment for electrical and electromagnetic quantities. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the follo
46、wing significant technical changes with respect to the previous edition: a) integration of the new measurement functions of IEC 61000-4-30:2015 (e.g. RVC and current functions); b) integration of the new requirements of IEC/TS 61000-6-5:2015, update of definitions of environment G and H, update of a
47、pplicable EMC performance criteria; c) correction of minor mistakes, improvement in specification. 6 IEC 62586-1:2017 IEC 2017 The text of this International Standard is based on the following documents: FDIS Report on voting 85/586/FDIS 85/590/RVD Full information on the voting for the approval of
48、this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. It has the status of a basic EMC publication in accordance with IEC Guide 107. A list of all parts of the IEC 62586 series,
49、 published under the general title Power quality measurement in power supply systems, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by
