1、 IEC 62345 Edition 1.0 2005-03 INTERNATIONAL STANDARD NORME INTERNATIONALE ID format for 50 mm magneto-optical disc system Format de lidentifiant pour un systme disque magnto-optique de 50 mm IEC 62345:2005 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2005 IEC, Geneva, Switzerland
2、 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of t
3、he requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune
4、 partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le cop
5、yright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.c
6、h Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications
7、is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (referen
8、ce number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a
9、month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabul
10、ary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisat
11、ion mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rc
12、ente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les
13、 projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electro
14、pedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en lig
15、ne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62345 Edition 1.0 2005-03 INTERNATIONAL STANDARD NORME INTERNATIONALE ID format for 50 mm magneto-optical disc system Format de lid
16、entifiant pour un systme disque magnto-optique de 50 mm INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XE ICS 33.160.40 PRICE CODE CODE PRIX ISBN 978-2-83220-365-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commissio
17、n Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 62345 IEC:2005 CONTENTS FOREWORD . 7 1 Scope . 9 2 Normative refere
18、nces . 9 3 Terms and definitions . 9 4 Conventions and notations . 12 4.1 Representation of numbers . 12 4.2 Names. 12 5 List of acronyms . 13 6 General description of the optical disc cartridge . 13 7 General requirements . 14 7.1 Environments 14 7.2 Temperature shock 14 7.3 Safety requirements 15
19、8 Reference drive 15 8.1 Optical system. 15 8.2 Optical beam . 16 8.3 Read channels 16 8.4 Tracking 17 8.5 Rotation of the disc . 17 9 Mechanical and physical characteristics . 17 9.1 Dimensional and physical characteristics of the cartridge 17 9.2 Dimensional, mechanical and physical characteristic
20、s of the disc 27 9.3 Interface between cartridge and drive 32 10 Format of information . 33 10.1 Track geometry . 33 10.2 Track format 34 10.3 Frame format . 35 10.4 ECC Block format 42 10.5 Recording code . 43 10.6 Format of the Information Zone . 45 10.7 Format of the Data Zone . 46 10.8 Defect Ma
21、nagement 51 11 Characteristics of embossed information 55 11.1 Method of testing . 55 11.2 Signals from grooves (see Figure 26) 56 11.3 Signals from wobble groove (see Figure 27) 57 11.4 Signal from fine clock marks (see Figure 28) . 58 12 Characteristics of the recording layer . 59 12.1 Method of t
22、esting . 59 12.2 Magneto-optical characteristics . 60 13 File system . 63 13.1 Volume 63 13.2 File 73 62345 IEC:2005 3 14 File format of Sound and Images 78 14.1 General . 78 14.2 Directory Structure 78 14.3 File Format 79 Annex A (normative) Air cleanliness class 100000 . 82 Annex B (normative) Mea
23、surement method of reference plane flatness . 83 Annex C (normative) Measurement method of cartridge flatness 84 Annex D (normative) Measurement method of cartridge curvature . 85 Annex E (normative) Test method for measuring the friction force . 86 Annex F (normative) Format of the Data Field 88 An
24、nex G (normative) Contents of Control Tracks . 95 Annex H (normative) Relaxation by zones of the requirement for signals . 99 Annex I (informative) Transportation 100 Annex J (informative) Track deviation measurement 101 Annex K (informative) Digital still camera image file format standard Exif . 10
25、5 Annex L (informative) Design Rule for Camera File System DCF 106 Annex M (informative) Movie file format QuickTime . 107 Figure 1 Optical system of the reference drive . 15 Figure 2 Outline of cartridge 18 Figure 3 Cartridge reference line and reference plane 19 Figure 4 Cartridge Top and Side Vie
26、w 23 Figure 5 Cartridge Bottom View . 24 Figure 6 Shutter . 25 Figure 7 Shutter lock 25 Figure 8 Holding area 26 Figure 9 Screw location . 26 Figure 10 Disc dimensions . 28 Figure 11 Thickness of the protective coating 32 Figure 12 Gap between the disc and the internal wall of the cartridge 33 Figur
27、e 13 Track layout . 34 Figure 14 Layout of the Address Segment 35 Figure 15 Wolbble Pattern of the Address Segment . 35 Figure 16 Layout of the Data Segment . 39 Figure 17 The patterns of the Pre-write field and the Post-write field 40 Figure 18 ECC Block layout . 42 Figure 19 Header . 43 Figure 20
28、NRZI Plus convolution method . 44 Figure 21 NRZI Plus convolution method . 44 Figure 22 Layout of the Data Zone and Test Zones 47 Figure 23 Structure of Logical Zone . 51 4 62345 IEC:2005 Figure 24 Structure of PDL entry 54 Figure 25 Structure of SDL entry 55 Figure 26 Signals from grooves . 57 Figu
29、re 27 Signals from wobbled groove . 57 Figure 28 Signals from fine clock marks . 58 Figure 29 Radial push-pull signal and envelope of fine clock mark . 58 Figure 30 Recording magnetic field shape and Write pulse 60 Figure 31 Resolution 61 Figure 32 Spectrum analyser display . 61 Figure 33 Crosstalk
30、test pattern . 62 Figure 34 Directory structure including motion picture 79 Figure A.1 Particle size distribution curve 82 Figure B.1 Measurement method of reference plane flatness . 83 Figure C.1 Measurement method of cartridge flatness . 84 Figure D.1 Measurement method of cartridge curvature . 85
31、 Figure E.1 Arrangement of testing chip and disc for the measurement of friction force . 86 Figure E.2 Shape of testing chip 87 Figure E.3 Test cycle . 87 Figure F.1 Processing flow to generate Data unit 1 88 Figure F.2 Processing flow to generate Data unit 2 and Data unit 3 . 88 Figure F.3 Data uni
32、t 1 configuration . 89 Figure F.4 Data ID information . 89 Figure F.5 Feedback shift register for generation scramble data 92 Figure F.6 ECC block configuration 93 Figure F.7 ECC block after row interleave 94 Figure G.1 Track layout of the Control Zone. 96 Figure G.2 Layout of the Control Segment .
33、96 Figure G.3 Unit of the Control Segment . 97 Figure J.1 Maximum allowed amplitude of a sinusoidal track deviation . 101 Figure J.2 Implementation of a Reference Servo by filtering the track position signal with the reduction characteristics of the Reference Servo . 103 Figure J.3 Implementation of
34、 a Reference Servo by changing the transfer function of the actual servo 103 Figure J.4 Implementation of a Reference Servo by changing the tracking error of the actual servo 104 Table 1 Write protection . 21 Table 2 User hole 22 Table 3 Index hole . 22 Table 4 Nominal Address Data clock frequencies
35、 when the disc rotates at 50 Hz . 41 Table 5 Layout of the Information Zone 45 Table 6 Locations of the DMAs 47 Table 7 Byte assignment of the Disc Definition Structure (DDS) . 48 Table 8 Assign of Logical Zone 49 62345 IEC:2005 5 Table 9 Content of the PDL 53 Table 10 Content of the SDL 54 Table 11
36、 OSTA CS0 Charspec . 63 Table 12 Time stamp . 64 Table 13 Domain Entity Identifier . 64 Table 14 Domain Identifier Suffix . 64 Table 15 UDF Entity Identifier 65 Table 16 UDF Identifier Suffix 65 Table 17 Implementation Entity Identifier . 65 Table 18 Implementation Identifier Suffix . 65 Table 19 Be
37、ginning Extended Area Descriptor . 66 Table 20 NSR Descriptor . 66 Table 21 Terminating Extended Area Descriptor 66 Table 22 Descriptor Tag. 67 Table 23 Anchor Volume Descriptor Pointer . 67 Table 24 Primary Volume Descriptor 67 Table 25 Implementation Use Volume Descriptor . 68 Table 26 Implementat
38、ion Use of Implementation Use Volume Descriptor . 68 Table 27 Partition Descriptor 69 Table 28 Partition Contents 69 Table 29 Partition Header Descriptor . 69 Table 30 Logical Volume Descriptor . 70 Table 31 File Set Descriptor Extent Information . 70 Table 32 Integrity Sequence Extent Information .
39、 71 Table 33 Partition Maps . 71 Table 34 Unallocated Space Descriptor . 71 Table 35 Terminating Descriptor 71 Table 36 Logical Volume Integrity Descriptor . 72 Table 37 Logical Volume Contents Use 72 Table 38 Implementation 72 Table 39 lb_addr (Logical Block Address) 73 Table 40 short_ad (Short All
40、ocation Descriptor) . 73 Table 41 long_ad (Long Allocation Descriptor) . 73 Table 42 File Set Descriptor. 73 Table 43 File Identifier Descriptor 74 Table 44 d-characters 74 Table 45 File Entry. 75 Table 46 ICB Tag . 76 Table 47 Extended Attributes . 76 Table 48 Extended Attributes Header Descriptor
41、76 Table 49 File Times Extended Attribute 77 Table 50 Flags in ICB Tag . 77 Table 51 Space Bitmap Descriptor . 77 6 62345 IEC:2005 Table 52 Allocation Extent Descriptor 78 Table F.1 Initial value of shift register 91 Table G.1 Layout of the Control Zones . 95 Table H.1 Requirements for signals in ea
42、ch zone. 99 62345 IEC:2005 7 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ID FORMAT FOR 50 mm MAGNETO-OPTICAL DISC SYSTEM FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National C
43、ommittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Av
44、ailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental
45、 organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techn
46、ical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IE
47、C National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unifor
48、mity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition
