1、 IEC 62071-3 Edition 1.0 2005-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 3: Data stream format Systme de magntoscope numrique cassette balayage hlicodal signal compress utilisant la bande magntique
2、de 6,35 mm Format D-7 Partie 3: Format de suites de donnes IEC 62071-3:2005 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2005 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electron
3、ic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please cont
4、act the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y comp
5、ris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit
6、 national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and p
7、ublishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publish
8、ed. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore
9、.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than
10、30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assista
11、nce, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A
12、propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vou
13、s permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publication
14、s de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en angl
15、ais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contact
16、ez-nous: csciec.ch. IEC 62071-3 Edition 1.0 2005-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 3: Data stream format Systme de magntoscope numrique cassette balayage hlicodal signal compress utilisant
17、la bande magntique de 6,35 mm Format D-7 Partie 3: Format de suites de donnes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 33.160.40 PRICE CODE CODE PRIX ISBN 978-2-8322-0728-4 Registered trademark of the International Electrotechnical Commission Marque
18、dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62071-3 IEC:2005 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normati
19、ve references 5 3 Abbreviations and acronyms . 5 4 Identification within the serial data transport interface (SDTI) 6 4.1 SDTI header packet data . 6 4.2 Payload . 6 5 Stream block format . 6 5.1 Reserved data words . 7 5.2 Signal type words 7 5.3 Transmission type word . 9 5.4 DIF block ID words 10
20、 5.5 DIF block data words . 10 5.6 Error correction code (ECC) words. 10 6 Transmission order . 11 7 Mapping structure . 14 7.1 Channel unit 14 7.2 Mapping rules 14 Annex A (informative) Block diagram of D-7 recorder 23 Bibliography 24 Figure 1 Stream block format . 7 Figure 2 Signal type (ST) word
21、mapping . 7 Figure 3 Transmission type (TT) word mapping 9 Figure 4 Mapping of DIF block ID . 10 Figure 5 Mapping of ECC . 11 Figure 6 Transmission order in one frame for the 50 Mb/s structure 12 Figure 7 Transmission order in one frame for the 25 Mb/s structure 12 Figure 8 Transmission order in a D
22、IF sequence 13 Figure 9 Channel unit mapping for the 25 Mb/s structure (525/60 SDTI system) 16 Figure 10 Channel unit mapping for the 25 Mb/s structure (625/50 SDTI system) . 17 Figure 11 Channel unit mapping in a synchronized multichannel units transmission (525/60 SDTI system) . 19 Figure 12 Chann
23、el unit mapping in a synchronized multichannel units transmission (625/50 SDTI system) . 20 Figure 13 Channel unit mapping for the 50 Mb/s structure (525/60 SDTI system) 21 Figure 14 Channel unit mapping for the 50 Mb/s structure (625/50 SDTI system) 22 Figure A.1 Block diagram of D-7 recorder . 23
24、Table 1 Start lines of channel units . 18 62071-3 IEC:2005 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HELICAL-SCAN COMPRESSED DIGITAL VIDEO CASSETTE SYSTEM USING 6,35 mm MAGNETIC TAPE FORMAT D-7 Part 3: Data stream format FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldw
25、ide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other act
26、ivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subjec
27、t dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions dete
28、rmined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Commi
29、ttees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which
30、 they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publicati
31、on and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that
32、 they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any natu
33、re whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced
34、 publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internation
35、al Standard IEC 62071-3 has been prepared by technical area 6: Higher data rate storage media, data structures and equipment of IEC technical committee 100: Audio, video and multimedia systems and equipment. This bilingual version (2013-07) corresponds to the monolingual English version, published i
36、n 2005-10. The text of this standard is based on the following documents: CDV Report on voting 100/902/CDV 100/986/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been
37、voted upon. 4 62071-3 IEC:2005 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 62071 consists of the following parts, under the general title Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7: Part 1: VTR specificati
38、ons Part 2: Compression format Part 3: Data stream format This part 3 describes the specifications for transmission of DV-based compressed video and audio data stream over 270Mb/s and 360 Mb/s serial digital interface. Part 1 describes the VTR specifications which are tape, magnetization, helical re
39、cording, modulation method and basic system data for video compressed data. Part 2 describes the specifications for encoding process and data format for 525i and 625i systems. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indi
40、cated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 62071-3 IEC:2005 5 HELICAL-SCAN COMPRESSED DIGITAL VIDEO CASSETTE SYSTEM USING 6,35 mm MAG
41、NETIC TAPE FORMAT D-7 Part 3: Data stream format 1 Scope This part of IEC 62071 defines the format of the data stream for the synchronous exchange of DV-based audio, data, and compressed video (whose data structure is defined in SMPTE 314M) over the interface defined in SMPTE 305M. It covers the tra
42、nsmission of audio, subcode data and compressed video packets associated with DV-based 25 and 50 Mb/s data structures including faster-than-real-time transmission for 525/60 SDTI and 625/50 SDTI systems. This standard does not include the data stream of a DV-compressed structure as defined in SMPTE
43、322M. Space within SMPTE 305M not used by a data stream conforming to this standard may be used for the transmission of data other than those representing DV-based audio, data and compressed video. In this standard, the 60 Hz system refers to the field frequency 59,94 Hz system and the 50 Hz system
44、refers to the field frequency 50,0 Hz system. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a
45、mendments) applies. SMPTE 305M: 2005, Television Serial Data Transport Interface SMPTE 314M: 1999, Television Data Structure for DV-Based Audio, Data and Compressed Video 25 and 50 Mb/s SMPTE 322M: 2004, Television Format for Transmission of DV Compressed Video, Audio and Data Over a Serial Data Tra
46、nsport Interface 3 Abbreviations and acronyms DIF: Digital interface DVF: DIF valid flag ECC: Error correction code FF: Field/frame frequency flag FSNF: Frame sequence number flag SDI: Serial digital interface SDTI: Serial data transport interface ST: Signal type STVF: Signal type of video frame TRF
47、: Transmission rate flag TT: Transmission type 6 62071-3 IEC:2005 4 Identification within the serial data transport interface (SDTI) 4.1 SDTI header packet data The header packet data words of the serial data transport interface (SDTI) associated with this data stream format shall conform to SMPTE 3
48、05M. When the SDTI interface is transporting a data stream conforming to this standard, the block type word within the SDTI header packet shall have the value 173h for transported data contained in fixed-size blocks when ECC (error correction code) is used and the value 233h when ECC is not used. 4.
49、2 Payload The payload is composed of consecutive fixed-size blocks (see Figure 1). The SDTI data type word shall identify the data type of this payload with the value 221h. 5 Stream block format The stream block format is shown in Figure 1. The length of each stream block is 170 words, including a secondary header, two DIF (digital interface) block IDs, two DIF block data (of s