1、 IEC 62037-6 Edition 1.0 2013-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Passive RF and microwave devices, intermodulation level measurement Part 6: Measurement of passive intermodulation in antennas Dispositifs RF et micro-ondes passifs, mesure du niveau dintermodulation Partie 6: Mesure de lin
2、termodulation passive dans les antennes IEC 62037-6:2013-01(EN-FR) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mec
3、hanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the a
4、ddress below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la ph
5、otocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lI
6、EC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internat
7、ional Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue
8、 - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/sea
9、rchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publicati
10、ons. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equiva
11、lent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued s
12、ince 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos
13、 de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC
14、est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications t
15、echniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,).
16、Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois pa
17、r email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique I
18、nternational (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 3
19、7, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62037-6 Edition 1.0 2013-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Passive RF and microwave devices, i
20、ntermodulation level measurement Part 6: Measurement of passive intermodulation in antennas Dispositifs RF et micro-ondes passifs, mesure du niveau dintermodulation Partie 6: Mesure de lintermodulation passive dans les antennes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE IN
21、TERNATIONALE M ICS 33.040.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1345-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention
22、! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62037-6 IEC:2013 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Abbreviations . 5 4 Antenna definitions as it pertains to PIM . 5 4.1 Antenna 5 4.2 Antenna under test 6 4.3 Active antenna 6 4.4
23、Antenna PIM . 6 5 Antenna design and field installation considerations . 6 5.1 Environmental effects on PIM performance . 6 5.2 Antenna interface connection 6 5.3 Mounting considerations to avoid PIM generation 6 5.4 Neighbouring sources of interference 7 5.5 Standard practices and guidelines for ma
24、terial selection . 7 6 PIM measurement considerations . 7 6.1 Quality assurance process and handling procedures . 7 6.2 Measurement accuracy . 7 6.3 Test environment. 8 6.4 Safety . 8 6.5 Test set-up 8 6.5.1 Coaxial test cable assemblies 8 6.5.2 Defining a good low PIM reference load . 8 6.5.3 Test
25、set-up and test site baseline PIM verification . 8 6.6 PIM test configurations 9 6.7 Combined environmental and PIM testing 10 6.7.1 General . 10 6.7.2 Mechanical considerations . 10 6.7.3 Test system cables and connectors . 11 6.8 PIM test chamber design . 11 6.8.1 General . 11 6.8.2 RF absorber ma
26、terials . 11 6.8.3 Supporting structures and walls . 12 6.8.4 RF shielding 12 Figure 1 Antenna reverse PIM test set-up 9 Figure 2 Antenna forward PIM test set-up 10 62037-6 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PASSIVE RF AND MICROWAVE DEVICES, INTERMODULATION LEVEL MEASUREMENT Part
27、 6: Measurement of passive intermodulation in antennas FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-opera
28、tion on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as
29、“IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this prep
30、aration. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international cons
31、ensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts
32、are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
33、transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independ
34、ent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liab
35、ility shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (incl
36、uding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of
37、 this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62037-6 has been prepared by technical commit
38、tee 46: Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive components and accessories. This bilingual version (2014-01) corresponds to the monolingual English version, published in 2013-01. The text of this standard is based on the following documents: FDIS Report on voting 46/41
39、0/FDIS 46/422/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. 4 62037-6 IEC:2013 This publication has been drafted in accordance with the ISO/IEC Direc
40、tives, Part 2. A list of all the parts in the IEC 62037 series, published under the general title Passive RF and microwave devices, Intermodulation level measurement can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stabi
41、lity date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62037-6 IEC:2013 5 PASSIVE RF AND MICROWAVE DEVICES, INTERMODULATION LEVEL M
42、EASUREMENT Part 6: Measurement of passive intermodulation in antennas 1 Scope This part of IEC 62037 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qual
43、ification and acceptance test methods for antennas for use in low intermodulation (low IM) applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition
44、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62037-1:2012, Passive r.f. and microwave devices, intermodulation level measurement Part 1: General requirements and measuring methods IEC 62037-3, Passive r.f. and microwave
45、devices, intermodulation level measurement Part 3: Measurement of passive intermodulation in coaxial connectors 3 Abbreviations AIM Active intermodulation AUT Antenna under test ESD Electrostatic discharge HPA High power amplifier IM Intermodulation LNA Low noise amplifier PIM Passive intermodulatio
46、n RF Radio frequency 4 Antenna definitions as it pertains to PIM 4.1 Antenna An antenna is that part of a radio transmitting or receiving system which is designed to provide the required coupling between a transmitter or a receiver and the medium in which the radio wave propagates. The antenna consi
47、sts of a number of parts or components. These components include, but are not limited to, one or many radiating elements, one or many RF interfaces, a distribution or combining feed network, internal support structures, devices which control or adjust the amplitude/phase response and distribution to
48、 the radiating element(s), filters, diplexers, orthomode transducers, polarizers, waveguides, coaxial cables or printed circuits. In addition, peripheral components could also influence the PIM performance of the antenna. These 6 62037-6 IEC:2013 components may include, but are not limited to, mount
49、ing brackets, mounting hardware, radome, radome fasteners, thermal insulation and grounding hardware. 4.2 Antenna under test The antenna hardware can have an effect on the overall antenna PIM performance. Therefore, it is necessary to specify the hardware which is to be part of the antenna under test (AUT). 4.3 Active antenna An active antenna incorporates active devices such as low noise amplifiers (LNAs), high power amplifiers
