1、NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 1629-2 Premire dition First edition 199610 Numro de rfrence Reference number CEI/IEC 16292: 1996 Carton comprim aramide usages lectriques Partie 2: Mthodes dessai Aramid pressboard for electrical purposes Part 2: Methods of testValidit de la prsent
2、e publication Le contenu technique des publications de la CEI est cons- tamment revu par la CEI afin quil reflte ltat actuel de la technique. Des renseignements relatifs la date de reconfirmation de la publication sont disponibles auprs du Bureau Central de la CEI. Les renseignements relatifs ces rv
3、isions, ltablis sement des ditions rvises et aux amendements peuvent tre obtenus auprs des Comits nationaux de la CEI et dans les documents cidessous: Bulletin de la CEI Annuaire de la CEI Publi annuellement Catalogue des publications de la CEI Publi annuellement et mis jour rgulirement Terminologie
4、 En ce qui concerne la terminologie gnrale, le lecteur se reportera la CEI 50: Vocabulaire Electrotechnique Inter- national (VEI), qui se prsente sous forme de chapitres spars traitant chacun dun sujet dfini. Des dtails complets sur le VEI peuvent tre obtenus sur demande. Voir galement le dictionnai
5、re multilingue de la CEI. Les termes et dfinitions figurant dans la prsente publi cation ont t soit tirs du VEI, soit spcifiquement approuvs aux fins de cette publication. Symboles graphiques et littraux Pour les symboles graphiques, les symboles littraux et les signes dusage gnral approuvs par la C
6、EI, le lecteur consultera: la CEI 27: Symboles littraux utiliser en lectrotechnique; la CEI 417: Symboles graphiques utilisables sur le matriel. Index, relev et compilation des feuilles individuelles; la CEI 617: Symboles graphiques pour schmas; et pour les appareils lectromdicaux, la CEI 878: Symbo
7、les graphiques pour quipements lectriques en pratique mdicale. Les symboles et signes contenus dans la prsente publi cation ont t soit tirs de la CEI 27, de la CEI 417, de la CEI 617 et/ou de la CEI 878, soit spcifiquement approuvs aux fins de cette publication. Publications de la CEI tablies par le
8、 mme comit dtudes Lattention du lecteur est attire sur les listes figurant la fin de cette publication, qui numrent les publications de la CEI prpares par le comit dtudes qui a tabli la prsente publication. Validity of this publication The technical content of IEC publications is kept under constant
9、 review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available from the IEC Central Office. Information on the revision work, the issue of revised editions and amendments may be obtained from IEC
10、National Committees and from the following IEC sources: IEC Bulletin IEC Yearbook Published yearly Catalogue of IEC publications Published yearly with regular updates Terminology For general terminology, readers are referred to IEC 50: International Electrotechnical Vocabulary (IEV), which is issued
11、 in the form of separate chapters each dealing with a specific field. Full details of the IEV will be supplied on request. See also the IEC Multilingual Dictionary. The terms and definitions contained in the present publi cation have either been taken from the IEV or have been specifically approved
12、for the purpose of this publication. Graphical and letter symbols For graphical symbols, and letter symbols and signs approved by the IEC for general use, readers are referred to publications: IEC 27: Letter symbols to be used in electrical technology; IEC 417: Graphical symbols for use on equipment
13、. Index, survey and compilation of the single sheets; IEC 617: Graphical symbols for diagrams; and for medical electrical equipment, IEC 878: Graphical symbols for electromedical equipment in medical practice. The symbols and signs contained in the present publication have either been taken from IEC
14、 27, IEC 417, IEC 617 and/or IEC 878, or have been specifically approved for the purpose of this publication. IEC publications prepared by the same technical committee The attention of readers is drawn to the end pages of this publication which list the IEC publications issued by the technical commi
15、ttee which has prepared the present publication.NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 1629-2 Premire dition First edition 199610 CEI 1996 Droits de reproduction rservs Copyright all rights reserved Aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme
16、que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission
17、in writing from the publisher Bureau central de la Commission Electrotechnique Internationale 3, rue de Varemb Genve, SuisseCommission Electrotechnique InternationaleInternational Electrotechnical Commission CODE PRIX PRICE CODE Pour prix, voir catalogue en vigueur For price, see current catalogue C
18、 Carton comprim aramide usages lectriques Partie 2: Mthodes dessai Aramid pressboard for electrical purposes Part 2: Methods of test 2 16292 CEI:1996 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CARTON COMPRIM ARAMIDE USAGES LECTRIQUES Partie 2: Mthodes dessai AVANT-PROPOS 1) La CEI (Commission Elect
19、rotechnique Internationale) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit
20、 et de llectronique. A cet effet, la CEI, entre autres activits, publie des Normes Internationales. Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouverneme
21、ntales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniqu
22、es, reprsentent, dans la mesure du possible un accord international sur les sujets tudis, tant donn que les Comits nationaux intresss sont reprsents dans chaque comit dtudes. 3) Les documents produits se prsentent sous la forme de recommandations internationales. Ils sont publis comme normes, rappor
23、ts techniques ou guides et agrs comme tels par les Comits nationaux. 4) Dans le but dencourager lunification internationale, les Comits nationaux de la CEI sengagent appliquer de faon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes nationales et rg
24、ionales. Toute divergence entre la norme de la CEI et la norme nationale ou rgionale correspondante doit tre indique en termes clairs dans cette dernire. 5) La CEI na fix aucune procdure concernant le marquage comme indication dapprobation et sa responsabilit nest pas engage quand un matriel est dcl
25、ar conforme lune de ses normes. 6) Lattention est attire sur le fait que certains des lments de la prsente Norme internationale peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. La CEI ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de pro
26、prit et de ne pas avoir signal leur existence. La Norme internationale CEI 16292 a t tablie par le souscomit 15C: Spcifications, du comit dtudes 15 de la CEI: Matriaux isolants. Le texte de cette norme est issu des documents suivants: FDIS Rapport de vote 15C/619/FDIS 15C/689/RVD Le rapport de vote
27、indiqu dans le tableau cidessus donne toute information sur le vote ayant abouti lapprobation de cette norme. La CEI 1629 comprend les parties suivantes, prsentes sous le titre gnral Carton comprim aramide usages lectriques: Partie 1: Dfinitions, dsignations et prescriptions gnrales Partie 2: Mthode
28、s dessais Partie 3: Spcifications pour matriaux particuliers16292 IEC:1996 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ARAMID PRESSBOARD FOR ELECTRICAL PURPOSES Part 2: Methods of test FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization c
29、omprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes Interna
30、tional Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparatio
31、n. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international co
32、nsensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical reports or guides and they are
33、 accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard
34、and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the po
35、ssibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 1629-2 has been prepared by sub-committee 15C: Specifications, of IEC technical comm
36、ittee 15: Insulating materials. The text of this standard is based on the following documents: FDIS Report on voting 15C/619/FDIS 15C/689/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. IEC 1629 consists of the f
37、ollowing parts, under the general title Aramid pressboard for electrical purposes: Part 1: Definitions, designations and general requirements Part 2: Methods of test Part 3: Specifications for individual materials 4 16292 CEI:1996 CARTON COMPRIM ARAMIDE USAGES LECTRIQUES Partie 2: Mthodes dessai 1 D
38、omaine dapplication La prsente partie de la CEI 1629 donne les mthodes dessai applicables aux matriaux dcrits dans la CEI 16291. 2 Rfrences normatives Les documents normatifs suivants contiennent des dispositions qui, par suite de la rfrence qui y est faite, constituent des dispositions valables pou
39、r la prsente partie de la CEI 1629. Au moment de la publication, ldition indique tait en vigueur. Tout document normatif est sujet rvision et les parties prenantes aux accords fonds sur la prsente partie de la CEI 1629 sont invites rechercher la possibilit dappliquer ldition la plus rcente du docume
40、nt normatif indiqu ciaprs. Les membres de la CEI et de lISO possdent le registre des Normes internationales en vigueur. CEI 6412: 1979, Spcification pour le carton comprim et le papier comprim usages lectriques Partie 2: Mthodes dessaiAmendement 1 (1993) CEI 1629-1: 1996, Carton comprim aramide usag
41、es lectriques Partie 1: Dfinitions, dsignations et prescriptions gnrales 3 Note gnrale Les cartons comprims aramides usages lectriques sont essays conformment aux prescriptions de la CEI 6412 lexception des dispositions dcrites en 4.2. 4 Conditionnement des prouvettes 4.1 Les cartons comprims aramid
42、es de type APBLD, APB et APBC sont conditionns suivant larticle 1 de la CEI 6412. 4.2 Les cartons comprims aramides de type APBHD doivent galement tre conditionns suivant larticle 1 de la CEI 6412, mais en cas de contestation, le temps de conditionnement doit tre: Epaisseur nominale: 2,0 mm 2,0 mm 5
43、,0 mm et 5,0 mm Temps: 120 h 240 h 360 h _16292 IEC:1996 5 ARAMID PRESSBOARD FOR ELECTRICAL PURPOSES Part 2: Methods of tests 1 Scope This part of IEC 1629 gives the methods of test applicable for the materials classified in IEC 1629-1. 2 Normative references The following normative documents contai
44、n provisions which, through reference in this text, constitute provisions of this part of IEC 1629. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on IEC 1629 are encouraged to investigate the possibilit
45、y of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 641-2: 1979, Specification for pressboard and presspaper for electrical purposes Part 2: Method of test Amendment 1 (1993) IEC
46、1629-1: 1996, Aramid pressboard for electrical purposes Part 1: Definitions, designations and general requirements 3 General note Aramid pressboards for electrical purposes are tested according to the requirements of IEC 641-2 with the exception described in 4.2. 4 Conditioning of test specimens 4.1
47、 Aramid board type APB-LD, APB and APB-C are conditioned according to clause 1 of IEC 641-2. 4.2 Aramid board APB-HD shall also be conditioned according to clause 1 of IEC 641-2, but in case of dispute the conditioning time shall be: Nominal thickness: 2,0 mm 2,0 mm 5,0 mm and 5,0 mm Time: 120 h 240
48、 h 360 h _ Standards Survey We at the IEC want to know how our standards are used once they are published. The answers to this survey will help us to improve IEC standards and standard related information to meet your future needs Would you please take a minute to answer the survey on the other side and mail or fax to: Customer Service Centre (CSC) International Electrotechnical Commission 3, rue de Varemb Cas
