1、 IEC 61386-1Edition 2.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALEConduit systems for cable management Part 1: General requirements Systmes de conduits pour la gestion du cblage Partie 1: Exigences gnrales IEC61386-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Sw
2、itzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the cou
3、ntry of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contrair
4、e, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions s
5、ur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.
6、ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant
7、 review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,).
8、It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.elect
9、ropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www
10、.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (C
11、EI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vou
12、s possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). I
13、l donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et auss
14、i par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Elect
15、rotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41
16、 22 919 03 00 IEC 61386-1Edition 2.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALEConduit systems for cable management Part 1: General requirements Systmes de conduits pour la gestion du cblage Partie 1: Exigences gnrales INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INT
17、ERNATIONALE WICS 29.120.10 PRICE CODECODE PRIXISBN 2-8318-9623-1 2 61386-1 IEC:2008 CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General requirements.8 5 General conditions for tests8 6 Classification9 6.1 According to mechanical properties.9 6.1.1 Resistance
18、to compression9 6.1.2 Resistance to impact .9 6.1.3 Resistance to bending .10 6.1.4 Tensile strength.10 6.1.5 Suspended load capacity10 6.2 According to temperature 10 6.2.1 Lower temperature range.10 6.2.2 Upper temperature range.11 6.3 According to electrical characteristics11 6.3.1 With electrica
19、l continuity characteristics 11 6.3.2 With electrical insulating characteristics 11 6.3.3 With electrical continuity and insulating characteristics11 6.4 According to resistance to external influences .11 6.4.1 Protection against ingress of solid objects: protection in accordance with IEC 60529 to a
20、 minimum of IP3X11 6.4.2 Protection against ingress of water: protection in accordance with IEC 60529 to a minimum of IPX0 .11 6.4.3 Resistance against corrosion.11 6.5 According to resistance to flame propagation 11 6.5.1 Non-flame propagating 11 6.5.2 Flame propagating.11 7 Marking and documentati
21、on11 8 Dimensions 12 9 Construction.12 10 Mechanical properties 14 10.1 Mechanical strength 14 10.2 Compression test 15 10.3 Impact test 15 10.4 Bending test 16 10.5 Flexing test .16 10.6 Collapse test .16 10.7 Tensile test .16 10.8 Suspended load test17 11 Electrical properties18 11.1 Electrical re
22、quirements18 11.2 Bonding test 18 11.3 Dielectric strength and insulation resistance19 61386-1 IEC:2008 3 12 Thermal properties .20 13 Fire hazard.21 13.1 Reaction to fire21 13.1.1 Initiation of fire 21 13.1.2 Contribution to fire.21 13.1.3 Spread of fire 21 13.1.4 Additional reaction to fire charac
23、teristics .23 13.2 Resistance to fire 23 14 External influences .23 14.1 Degree of protection provided by enclosure.23 14.1.1 General .23 14.1.2 Degree of protection Ingress of foreign solid objects.23 14.1.3 Degree of protection Ingress of water .23 14.2 Resistance against corrosion.24 15 Electroma
24、gnetic compatibility .25 Annex A (normative) Classification coding for conduit systems 33 Annex B (normative) Determination of material thickness.36 Bibliography38 Figure 1 Arrangement for compression test26 Figure 2 Impact test apparatus.26 Figure 3 Assembly of conduit and conduit fitting for bondi
25、ng test .27 Figure 4 Arrangement for dielectric strength and insulation resistance tests Rigid conduit28 Figure 5 Arrangement for dielectric strength and insulation resistance tests Pliable and flexible conduit.29 Figure 6 Steel enclosure for test for resistance to flame propagation .30 Figure 7 Tes
26、t arrangement for resistance to flame propagation31 Figure 8 Test apparatus for resistance to heat .32 Table 1 Lower temperature range 10 Table 2 Upper temperature range 11 Table 3 Torque values for screw tests14 Table 4 Compression force 15 Table 5 Impact test values .16 Table 6 Tensile force .17 T
27、able 7 Suspended load 18 Table 8 Load for heating test .20 Table 9 Times of exposure of the sample to the flame .22 Table 10 Resistance to corrosion classification24 4 61386-1 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONDUIT SYSTEMS FOR CABLE MANAGEMENT Part 1: General requirements FOREW
28、ORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the elec
29、trical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to tec
30、hnical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Orga
31、nization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technica
32、l committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicat
33、ions is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nationa
34、l and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be i
35、n conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees
36、 for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the
37、Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held r
38、esponsible for identifying any or all such patent rights. International Standard IEC 61386-1 has been prepared by subcommittee 23A: Cable management systems, of IEC technical committee 23: Electrical accessories. This second edition cancels and replaces the first edition published in 1996, and its A
39、mendment 1 (2000), and it constitutes a technical revision. The changes to the first edition are as follows: change to the length of the test specimen between fittings for the tensile test, editorial and normative reference updates. 61386-1 IEC:2008 5 The text of this standard is based on the follow
40、ing documents: FDIS Report on voting 23A/553/FDIS 23A/558/RVDFull information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the part
41、s in the IEC 61386 series, under the general title Conduit systems for cable management, can be found on the IEC website. This Part 1 is to be used in conjunction with the appropriate Part 2, which contains clauses to supplement or modify the corresponding clauses in Part 1, to provide the relevant
42、particular requirements for each type of product. A conduit system which conforms to this standard is deemed safe for use. In this publication, the following print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. The
43、following differences exist in some countries: 6.5.2: In Australia and Austria, conduits and conduit fittings may be classified with low acid gas emission. 13.1.4: In Australia conduits and conduit fittings classified as low acid gas emission shall be tested in accordance with IEC 60754-1, evolve no
44、t more than the equivalent of 5 mg of hydrochloride-acid per gram of sample. In Austria conduits and conduit fittings classified as low acid gas emission shall be tested in accordance with IEC 60754-2. The committee has decided that the contents of this publication will remain unchanged until the ma
45、intenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 61386-1 IEC:2008 CONDUIT SYSTEMS FOR CABLE MANAGEMENT Part 1:
46、General requirements 1 Scope This part of IEC 61386 specifies requirements and tests for conduit systems, including conduits and conduit fittings, for the protection and management of insulated conductors and/or cables in electrical installations or in communication systems up to 1 000 V a.c. and/or
47、 1 500 V d.c. This standard applies to metallic, non-metallic and composite conduit systems, including threaded and non-threaded entries which terminate the system. This standard does not apply to enclosures and connecting boxes which come within the scope of IEC 60670. NOTE 1 Certain conduit system
48、s may also be suitable for use in hazardous atmospheres. Regard should then be taken of the extra requirements necessary for equipment to be installed in such conditions. NOTE 2 Earthing conductors may or may not be insulated. 2 Normative references The following referenced documents are indispensab
49、le for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60417, Graphical symbols for use on equipment IEC 60423:2007, Conduit systems for cable management Outside diameters of conduits for electrical installations and threads for condu
