1、 IEC 61169-8 Edition 1.0 2007-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 (type BNC) Connecteurs pour frquences r
2、adiolectriques Partie 8: Spcification intermdiaire Connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 6,5 mm (0,256 in) verrouillage baonnette Impdance caractristique 50 (type BNC) IEC 61169-8:2007-02(EN-FR) THIS PUBLICATION IS COPYRIGHT PROTECTED Cop
3、yright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member Na
4、tional Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rserv
5、s. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vo
6、us avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00
7、 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical
8、content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information
9、 on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text,
10、technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. El
11、ectropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) onlin
12、e. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Cust
13、omer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore e
14、t publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendem
15、ent peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et i
16、Pad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published
17、 - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectri
18、ques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrot
19、echniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires
20、sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61169-8 Edition 1.0 2007-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with ba
21、yonet lock Characteristic impedance 50 (type BNC) Connecteurs pour frquences radiolectriques Partie 8: Spcification intermdiaire Connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 6,5 mm (0,256 in) verrouillage baonnette Impdance caractristique 50 (ty
22、pe BNC) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 29.120.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1328-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make s
23、ure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61169-8 IEC:2007 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 IEC type designation 6 4 Interface dimensions 7 4.
24、1 Dimensions General purpose connectors 7 5 Mechanical gauges and standard test connectors . 11 5.1 Mechanical gauges 11 5.2 Standard test connectors . 14 6 Outline dimensions . 19 7 Quality assessment procedures 19 7.1 General . 19 7.2 Ratings and characteristics . 19 7.3 Test schedule and inspecti
25、on requirements . 21 7.4 Procedures 23 8 Instructions for preparation of detail specifications . 23 8.1 General . 23 8.2 Identification of the Detail specification . 24 8.3 Identification of the component 24 8.4 Performance 24 8.5 Marking, ordering information and related matters . 24 8.6 Selection
26、of tests, test conditions and severities 24 8.7 Blank detail specification pro-forma for type BNC connector 26 Annex A (normative) Information for interface dimensions of 75 characteristic impedance connector with unspecified reflection factor . 31 Bibliography 35 Figure 1 Connector with pin-centre
27、contact (for dimensions, see Table 1) 7 Figure 2 Details of bayonet lock . 8 Figures 3 and 4 Details of alternative coupling grooves . 8 Figure 5 Details of pin-centre contact . 8 Figure 6 Connector with socket-centre contact (for dimensions, see Table 2) 10 Figure 7 Details of socket-centre contact
28、 . 10 Figure 8 Gauge for outer contact of pin connector 11 Figure 9 Gauge pin for socket-centre contact . 12 Figure 10 Dimensions of gauge for performance test (see Table 5) 13 Figure 11 Dimensions of connector (see Table 6) 15 Figure 12 Dimensions of centre contact (see Table 6) 15 Figure 13 Dimens
29、ions of connector (see Table 7) 17 Figure 14 Dimensions of centre contact (see Table 7) 17 Figure A.1 Connector with pin centre contact and Figure A.2 Details of bayonet lock 31 61169-8 IEC:2007 3 Figure A.3 Details of alternative coupling grooves 31 Figure A.4 Details of pin centre contact 31 Figur
30、e A.5 Connector with socket centre contact 33 Figure A.6 Position of coupling studs . 33 Figure A.7 Details of socket centre contact 33 Table 1 Dimensions for connector with pin-centre contact 9 Table 2 Dimensions for connector with socket-centre contact 11 Table 3 Dimensions for gauges for outer co
31、ntact of pin connector 12 Table 4 Dimensions for gauge pin for socket-centre contact. 12 Table 5 Dimensions of gauge for performance test 14 Table 6 Dimensions of centre contact 16 Table 7 Dimensions for standard test connector . 18 Table 8 Preferred climatic categories (see IEC 60068-1):. 19 Table
32、9 Ratings and characteristics . 20 Table 10 Acceptance tests . 21 Table 11 Periodic tests 22 Table A.1 Dimensions for pin connector . 32 Table A.2 Dimensions for socket connector . 34 4 61169-8 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 8: Sectional specific
33、ation RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 (type BNC) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical commi
34、ttees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical
35、 Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
36、and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agree
37、ments of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use a
38、nd are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote
39、 international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicate
40、d in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to
41、IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
42、expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9)
43、Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-8 has been prepared by subcommittee 46F: RF and microwave pas
44、sive components, of IEC technical committee 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories. This first edition of IEC 61169-8 cancels and replaces IEC 60169-8 published in 1978 as well as its Amendment 1 (1996) and Amendment 2 (1997). This edition c
45、onstitutes a technical revision. This first edition of IEC 61169-8 differs from IEC 60169-8 primarily in that it contains a new Clause 7: Quality assessment procedures and a new Clause 8: Instructions for preparation of detail specifications. Futhermore this IEC 61169-8 refers to IEC 61169-1 whereas
46、 IEC 60169- 8 referred to IEC 60169-1. 61169-8 IEC:2007 5 This bilingual version (2014-01) corresponds to the monolingual English version, published in 2007-02. The text of this standard is based on the following documents: FDIS Report on voting 46F/57/FDIS 46F/67/RVD Full information on the voting
47、for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, publishe
48、d under the general title Radio frequency connectors, can be found on the IEC website. The QC number that appears on the front cover of this publication is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ). The committee has decided that the contents of t
49、his publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 61169-8 IEC:2007 RADIO-FREQUEN
