1、 IEC 61158-3-13 Edition 2.0 2014-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks Fieldbus specifications Part 3-13: Data-link layer service definition Type 13 elements Rseaux de communication industriels Spcifications des bus de terrain Partie 3-13: Dfinition des ser
2、vices de la couche liaison de donnes lments de type 13 IEC 61158-3-13:2014-08(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
3、 electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, pl
4、ease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniqu
5、e, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Co
6、mit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and
7、publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publis
8、hed. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications searc
9、h - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all
10、 new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and F
11、rench, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC pub
12、lications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: c
13、sciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des
14、 publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationale
15、s, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte
16、, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi un
17、e fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire
18、Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des pub
19、lications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61158-3-13 Edition 2.0 2014-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial com
20、munication networks Fieldbus specifications Part 3-13: Data-link layer service definition Type 13 elements Rseaux de communication industriels Spcifications des bus de terrain Partie 3-13: Dfinition des services de la couche liaison de donnes lments de type 13 INTERNATIONAL ELECTROTECHNICAL COMMISSI
21、ON COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 25.040.40; 35.100.20; 35.110 PRICE CODE CODE PRIX ISBN 978-2-8322-1714-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this p
22、ublication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61158-3-13:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 1.1 General . 7 1.2 Specifications 7 1.3 Conformance . 7 2 Normative reference
23、s . 8 3 Terms, definitions, symbols, abbreviations and conventions . 8 3.1 Reference model terms and definitions 8 3.2 Service convention terms and definitions . 10 3.3 Data-link service terms and definitions 11 3.4 Symbols and abbreviations 15 3.5 Common conventions 16 3.6 Additional Type 13 conven
24、tions . 17 4 Data-link service and concept . 18 4.1 Overview . 18 4.2 Detailed description of isochronous-data services . 27 4.3 Detailed description of asynchronous-data service 28 4.4 Detailed description of exception-signaling services 35 4.5 NMT-status services 37 5 Data-link management services
25、 (and concepts) 38 5.1 General . 38 5.2 Facilities of the DLMS . 38 5.3 Services of the DL-management 38 5.4 Overview of interactions 39 5.5 Detail specification of service and interactions 40 Bibliography 45 Figure 1 Relationships of DLSAPs, DLSAP-addresses and group DL-addresses 13 Figure 2 Type 1
26、3 communication architecture 18 Figure 3 Sequence diagram of isochronous-data service . 19 Figure 4 Sequence diagram of service-data service . 20 Figure 5 Sequence diagram of an unspecified-data transfer service . 21 Figure 6 Sequence diagram of a status-data transfer service . 21 Figure 7 Sequence
27、diagram of an ident-data transfer service . 22 Figure 8 Sequence diagram of a sync-data transfer service . 23 Figure 9 Sequence diagram of an NMT-command transfer service . 24 Figure 10 Sequence diagram of an exception-signaling service . 25 Figure 11 Sequence diagram of a NMT-status transfer servic
28、e 26 Figure 12 Reset, Set value and Get value services 39 Figure 13 Event and Frame status service . 40 Table 1 Type 13 node ID assignment . 27 Table 2 Primitives and parameters used on the isochronous data service 27 IEC 61158-3-13:2014 IEC 2014 3 Table 3 Transmit /Receive isochronous-data primitiv
29、es and the parameters . 28 Table 4 Primitives and parameters used on service data transfer service . 28 Table 5 Transmit / Receive service-data primitives and the parameters . 29 Table 6 Primitives and parameters used on the unspecified-data service . 30 Table 7 Transmit / receive unspecified-data p
30、rimitives and the parameters 30 Table 8 Primitives and parameters used on status-data transfer service 31 Table 9 Status data primitives and the parameters . 31 Table 10 Primitives and parameters used on ident-data transfer service 32 Table 11 Ident data primitives and the parameters . 33 Table 12 P
31、rimitives and parameters used on sync-data transfer service. 33 Table 13 Sync data primitives and the parameters . 34 Table 14 Primitives and parameters used on the NMT-command service . 34 Table 15 NMT-command primitives and the parameters . 35 Table 16 Primitives and parameters used on the excepti
32、on-signaling service . 35 Table 17 Exception-signaling initialization primitives and the parameters . 36 Table 18 Exception signaling initialization primitives and the parameters . 36 Table 19 Primitives and parameters used on the NMT-status service . 37 Table 20 NMT-status primitives and the parame
33、ters. 37 Table 21 Summary of DL-management primitives and parameters . 39 Table 22 DLM-Reset primitives and parameters . 40 Table 23 DLM-Set-value primitives and parameters . 41 Table 24 DLM-Get-value primitives and parameters . 42 Table 25 Event primitives and parameters . 42 Table 26 Event-related
34、 state change variables . 43 Table 27 Frame status primitives and parameters 43 Table 28 Frame parameters . 44 4 IEC 61158-3-13:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL COMMUNICATION NETWORKS FIELDBUS SPECIFICATIONS Part 3-13: Data-link layer service definition Type 13 el
35、ements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization
36、 in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entr
37、usted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Inter
38、national Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since
39、each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of
40、 IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in
41、their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity asse
42、ssment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, empl
43、oyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of th
44、e publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the
45、possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Attention is drawn to the fact that the use of the associated protocol type is restricted by its intellectual-property-r
46、ight holders. In all cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits a layer protocol type to be used with other layer protocols of the same type, or in other type combinations explicitly authorized by its intellectual-property-rig
47、ht holders. NOTE Combinations of protocol types are specified in IEC 61784-1 and IEC 61784-2. International Standard IEC 61158-3-13 has been prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition c
48、ancels and replaces the first edition published in 2007. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: IEC 61158-3-13:2014 IEC 2014 5 addition of a new communication class, corrections and editorial improvements. The text of th
49、is standard is based on the following documents: FDIS Report on voting 65C/759/FDIS 65C/769/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with ISO/IEC Directives, Part 2. A list of all the parts of the IEC