1、 IEC 60947-4-2 Edition 3.0 2011-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters AC semiconductor motor controllers and starters Appareillage basse tension Partie 4-2: Contacteurs et dmarreurs de moteurs Gradateurs et dmarr
2、eurs semiconducteurs de moteurs courant alternatif IEC 60947-4-2:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or
3、mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact th
4、e address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la
5、 photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit natio
6、nal de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for
7、all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: ww
8、w.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC pu
9、blications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, wit
10、h equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or c
11、ontact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies a
12、pparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le C
13、atalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur le
14、s nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 terme
15、s et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette pub
16、lication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60947-4-2 Edition 3.0 2011-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear Part 4-2: Contactors and moto
17、r-starters AC semiconductor motor controllers and starters Appareillage basse tension Partie 4-2: Contacteurs et dmarreurs de moteurs Gradateurs et dmarreurs semiconducteurs de moteurs courant alternatif INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XD ICS 29.1
18、30.20 PRICE CODE CODE PRIX ISBN 978-2-88912-505-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60947-4-2 IEC:2011 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope . 9 2 Normative references . 10 3 Terms, definitio
19、ns, symbols and abbreviations 10 3.1 General . 10 3.2 Alphabetical index of terms . 10 3.3 Terms and definitions concerning a.c. semiconductor motor controllers and starters 12 3.4 Terms and definitions concerning hybrid motor controllers and starters . 14 3.5 Terms and definitions concerning EMC de
20、finitions . 18 3.6 Symbols and abbreviations 19 4 Classification 19 5 Characteristics of a.c. semiconductor motor controllers and starters . 20 5.1 Summary of characteristics . 20 5.2 Type of equipment . 20 5.2.1 Form of equipment 20 5.2.2 Number of poles 20 5.2.3 Kind of current . 20 5.2.4 Interrup
21、ting medium (air, vacuum, etc.) . 20 5.2.5 Operating conditions of the equipment . 20 5.3 Rated and limiting values for main circuits . 21 5.3.1 Rated voltages 21 5.3.2 Currents 23 5.3.3 Rated frequency 23 5.3.4 Rated duty . 23 5.3.5 Normal load and overload characteristics 24 5.3.6 Rated conditiona
22、l short-circuit current . 25 5.4 Utilization category 25 5.4.1 General . 25 5.4.2 Assignment of ratings based on the results of tests . 26 5.5 Control circuits 27 5.6 Auxiliary circuits 27 5.7 Characteristics of relays and releases (overload relays) 27 5.7.1 Summary of characteristics 28 5.7.2 Types
23、 of relay or release . 28 5.7.3 Characteristic values . 28 5.7.4 Designation and current settings of overload relays . 29 5.7.5 Time-current characteristics of overload relays 29 5.7.6 Influence of ambient air temperature . 30 5.8 Co-ordination with short-circuit protective devices (SCPD) 30 6 Produ
24、ct information 30 6.1 Nature of information . 30 6.2 Marking . 31 6.3 Instructions for installation, operation, and maintenance . 31 7 Normal service, mounting and transport conditions . 32 60947-4-2 IEC:2011 3 7.1 Normal service conditions . 32 7.1.1 Ambient air temperature 32 7.1.2 Altitude 32 7.1
25、.3 Atmospheric conditions 32 7.1.4 Shock and vibrations . 32 7.2 Conditions during transport and storage 32 7.3 Mounting . 32 7.4 Electrical system disturbances and influences . 32 8 Constructional and performance requirements 33 8.1 Constructional requirements 33 8.1.1 General . 33 8.1.2 Materials
26、. 33 8.1.3 Current-carrying parts and their connections . 33 8.1.4 Clearances and creepage distances 33 8.1.5 Actuator . 33 8.1.6 Indication of the contact position . 33 8.1.7 Additional requirements for equipment suitable for isolation 33 8.1.8 Terminals 33 8.1.9 Additional requirements for equipme
27、nt provided with a neutral pole . 34 8.1.10 Provisions for protective earthing 34 8.1.11 Enclosures for equipment 34 8.1.12 Degrees of protection of enclosed equipment 34 8.1.13 Conduit pull-out, torque and bending with metallic conduits . 34 8.2 Performance requirements 34 8.2.1 Operating condition
28、s 34 8.2.2 Temperature rise . 38 8.2.3 Dielectric properties. 41 8.2.4 Normal load and overload performance requirements 42 8.2.5 Co-ordination with short-circuit protective devices . 47 8.3 EMC requirements . 47 8.3.1 General . 47 8.3.2 Emission . 48 8.3.3 Immunity . 48 9 Tests 50 9.1 Kinds of test
29、s 50 9.1.1 General . 50 9.1.2 Type tests . 50 9.1.3 Routine tests . 50 9.1.4 Sampling tests . 50 9.1.5 Special tests 51 9.2 Compliance with constructional requirements 51 9.3 Compliance with performance requirements 51 9.3.1 Test sequences . 51 9.3.2 General test conditions 52 9.3.3 Performance unde
30、r no load, normal load, and overload conditions 52 9.3.4 Performance under short-circuit conditions 62 9.3.5 EMC tests 65 9.3.6 Routine and sampling tests 68 Annex A (normative) Marking and identification of terminals 70 4 60947-4-2 IEC:2011 Annex B Vacant 73 Annex C (normative) Co-ordination at the
31、 crossover current between the starter and associated SCPD 74 Annex D Vacant 78 Annex E Vacant 79 Annex F (informative) Operating capability. 80 Annex G (informative) Examples of control circuit configurations . 83 Annex H Vacant 85 Annex I (normative) Modified test circuit for short-circuit testing
32、 of semiconductor motor controllers and starters . 86 Annex J (informative) Flowchart for constructing bypassed semiconductor controllers tests . 88 Annex K (normative) Extended functions within electronic overload relays . 89 Bibliography 94 Figure 1 Semiconductor motor control devices . 13 Figure
33、2 Connecting methods 22 Figure 3 Thermal memory test . 36 Figure 4 Multiple of current setting limits for ambient air temperature compensated time-delay overload relays 62 Figure C.1 Examples of time-current withstand characteristic 77 Figure F.1 Thermal stability test profile 80 Figure F.2 Overload
34、 capability test profile 81 Figure F.3 Blocking and commutating capability test profile . 82 Figure G.1 Diagrammatic representation of an ECD . 83 Figure G.2 Single supply and control input . 83 Figure G.3 Single supply and control input . 84 Figure G.4 Controllers with an internal control supply an
35、d control input only 84 Figure I.1 - Modified circuit for short-circuit testing of semiconductor devices . 86 Figure I.2 - Time line for the short-circuit test of 9.3.4.1.6 87 Figure K.1 Test circuit for the verification of the operating characteristic of a residual current electronic overload relay
36、 . 93 Table 1 Functional possibilities of semiconductor motor control devices 14 Table 2 Utilization categories . 26 Table 3 Relative levels of severity 27 Table 4 Trip classes of overload relays 29 Table 5 Limits of operation of time-delay overload relays when energized on all poles . 35 Table 6 Li
37、mits of operation of three-pole time-delay overload relays when energized on two poles only 37 Table 7 Temperature rise limits for insulated coils in air and in oil 40 Table 8 Intermittent duty test cycle data . 40 Table 9 Minimum overload current withstand time (T x ) in relation to overload curren
38、t ratio (X) and corresponding to overload relay trip class (see Table 19) 43 Table 10 Minimum requirements for thermal stability test conditions a. 43 60947-4-2 IEC:2011 5 Table 11 Minimum requirements for overload capability test conditions 44 Table 12 Minimum requirements and conditions for perfor
39、mance testing with an induction motor load . 44 Table 13 Making and breaking capacity test; making and breaking conditions according to utilization categories for the mechanical switching device of hybrid motor controllers H1, H2, H3 and for certain forms of bypassed controllers 46 Table 14 Conventi
40、onal operational performance making and breaking conditions according to utilization categories for the mechanical switching device of hybrid motor controllers H1B, H2B, H3B and for certain forms of bypassed controllers 46 Table 15 Specific acceptance or performance criteria when EM disturbances are
41、 present . 49 Table 16 Thermal stability test specifications . 57 Table 17 Initial case temperature requirements 57 Table 18 Blocking and commutating capability test specifications 59 Table 19 Terminal disturbance voltage limits for conducted radio-frequency emission . 67 Table 20 Radiated emissions
42、 test limits . 67 Table A.1 Main circuit terminal markings 70 Table C.1 Test conditions 76 Table K.1 Operating time of residual current electronic overload relays . 90 6 60947-4-2 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 4-2: Contactors and mot
43、or-starters AC semiconductor motor controllers and starters FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
44、operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred t
45、o as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this
46、 preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
47、 consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable eff
48、orts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicat
49、ions transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
