1、 IEC 60794-1-3 Edition 1.0 2017-05 INTERNATIONAL STANDARD Optical fibre cables Part 1-3: Generic specification Optical cable elements IEC 60794-1-3:2017-05(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of
2、this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright o
3、r have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www
4、.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under con
5、stant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Sp
6、ecifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives informat
7、ion on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds
8、leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotec
9、hnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us
10、your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60794-1-3 Edition 1.0 2017-05 INTERNATIONAL STANDARD Optical fibre cables Part 1-3: Generic specification Optical cable elements INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.1
11、80.10 ISBN 978-2-8322-4280-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 60794-1-3:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbol
12、s and abbreviated terms 5 4 Requirements 6 4.1 General . 6 4.2 Test methods 6 4.3 Cable elements . 6 Bibliography 7 IEC 60794-1-3:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 1-3: Generic specification Optical cable elements FOREWORD 1) The International Elec
13、trotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.
14、 To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Na
15、tional Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization
16、 (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representati
17、on from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot
18、 be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications.
19、 Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, acces
20、s to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including indiv
21、idual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon,
22、this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of
23、this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-1-3 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. The text of this Inte
24、rnational Standard is based on the following documents: CDV Report on voting 86A/1764/CDV 86A/1791/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with t
25、he ISO/IEC Directives, Part 2. A list of all parts in the IEC 60794 series, published under the general title Optical fibre cables, can be found on the IEC website. 4 IEC 60794-1-3:2017 IEC 2017 The committee has decided that the contents of this document will remain unchanged until the stability da
26、te indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 60794-1-3:2017
27、IEC 2017 5 OPTICAL FIBRE CABLES Part 1-3: Generic specification Optical cable elements 1 Scope This part of IEC 60794 is a generic specification covering optical cable elements. Requirements which are described in this document apply to elements of optical fibre cables for use with telecommunication
28、 equipment and devices employing similar techniques. The elements which are the subject of this document are those which apply to several cable types of IEC 60794 (all parts) and as defined by sectional specifications IEC 60794-2, IEC 60794-3, IEC 60794-4, and IEC 60794-5. The requirements for cable
29、 elements are described in the IEC 60794-1-3X series for which the IEC 60794-1-31 1is the first one, and family specifications and detailed specifications of the aforementioned sectional specifications can define specific cables families and types. 2 Normative references The following documents are
30、referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60794-1-1, Optical fi
31、bre cables Part 1-1: Generic specification General IEC 60794-1-2, Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures General guidance IEC 60794-1-23, Optical fibre cables Part 1-23: Generic specification Basic optical cable test procedures Cable element test met
32、hods IEC 60794-2, Optical fibre cables Part 2: Indoor cables Sectional specification IEC 60794-3, Optical fibre cables Part 3: Outdoor cables Sectional specification IEC 60794-4, Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines IEC 60794-5, Opti
33、cal fibre cables Part 5: Sectional specification Microduct cabling for installation by blowing 3 Terms, definitions, symbols and abbreviated terms For the purposes of this document, the terms, definitions, symbols and abbreviated terms given in IEC 60794-1-1 apply. _ 1Under preparation. Stage at the
34、 time of publication: IEC PCC 60794-1-31:2017. 6 IEC 60794-1-3:2017 IEC 2017 ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/ob
35、p 4 Requirements 4.1 General Optical cable elements shall be defined in sectional specifications subordinate to this general specification. Elements so defined should be of a sufficiently general nature to be applicable to cables in more than one of the cable sectional specifications IEC 60794-2, IE
36、C 60794-3, IEC 60794-4, and IEC 60794-5. Specific test methods, materials, construction attributes, dimensions, and the like shall be as defined in the specifications subordinate to this general specification. 4.2 Test methods Test methods are defined in generic specification IEC 60794-1-2 and its s
37、ubordinate sectional specifications. In particular, IEC 60794-1-23 addresses test methods specific to defined cable elements. 4.3 Cable elements Cable elements include, but are not limited to, the following: optical fibre ribbons; buffered fibres; ruggedized fibre/ruggedized fibre element; polymeric
38、 tube; micro modules (definition is to be determined). IEC 60794-1-3:2017 IEC 2017 7 Bibliography IEC 60794 (all parts), Optical fibre cables IEC 60794-1-31, Optical fibre cables Part 1-31: Sectional specification for cable element Optical fibre ribbons 2_ _ 2Under preparation. Stage at the time of publication: IEC PCC 60794-1-31:2017. INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varemb PO Box 131 CH-1211 Geneva 20 Switzerland Tel: + 41 22 919 02 11 Fax: + 41 22 919 03 00 infoiec.ch www.iec.ch
