1、 IEC 60745-2-16Edition 2.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers Outils lectroportatifs moteur Scurit Partie 2-16: Rgles particulires pour les agrafeuses IEC60745-2-16:2008 THIS PUBLICATION IS C
2、OPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
3、 IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits
4、 de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI d
5、u pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva
6、 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical c
7、ontent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria
8、 (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available o
9、n-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnica
10、l Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI
11、 La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI es
12、t constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents cr
13、itres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles
14、 publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues
15、additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous
16、: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60745-2-16Edition 2.0 2008-02INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers Outils lectroportatifs moteur Scurit Partie 2-16: Rgles particulire
17、s pour les agrafeuses INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE NICS 25.140.20 PRICE CODECODE PRIXISBN 2-8318-9597-9 2 60745-2-16 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-16: Particular requi
18、rements for tackers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning st
19、andardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prepar
20、ation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely wi
21、th the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant sub
22、jects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technica
23、l content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent
24、possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any e
25、quipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees an
26、d IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) A
27、ttention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights
28、. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60745-2-16 has been prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household and similar electrical appliances. The
29、 text of this standard is based on the following documents: FDIS Report on voting 61F/703/FDIS 61F/711/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This second edition cancels and replaces the first edition pu
30、blished in 1993 and constitutes a technical revision. Main changes include Clause 8: Markings and instructions, introducing 60745-2-16 IEC:2008 3 detailed safety warnings; Clause 11: Input and current, introducing specification for rated current and input; Clause 12: Heating, with a modified test cy
31、cle; Clause 17: Endurance, with testing based on actuation numbers rather than on time; Clause 18: Abnormal operation, introducing an overload test of Part 1 slightly modified for tackers; Clause 19: Mechanical hazards, with requirements for actuating the tool dependant on the kind of actuation syst
32、em. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60745-1. It was established on the basis of the fourth edition (2006) of that standard. NOTE 1 When “Part 1” is mentioned in this standard,
33、 it refers to IEC 60745-1. This part 2 supplements or modifies the corresponding clauses in IEC 60745-1, so as to convert that publication into the IEC standard: Particular requirements for tackers. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far
34、as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unle
35、ss notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type
36、; notes: in small roman type. A list of all parts of the IEC 60745 series, under the general title: Hand-held motor-operated electric tools Safety, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date
37、 indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60745-2-16 IEC:2008 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-16: Parti
38、cular requirements for tackers 1 Scope This clause of Part 1 is applicable, except as follows: Addition: This standard applies to tackers intended for general use. This standard does not apply to tackers intended for industrial production applications. 2 Normative references This clause of Part 1 is
39、 applicable. 3 Terms and definitions This clause of Part 1 is applicable, except as follows: 3.101 tacker tool in which energy is applied to loaded fasteners, e.g. metal pins, nails or staples, for the purpose of driving the latter into wood, plastic, fabric or similar material 3.102 actuation syste
40、m use of a trigger, workpiece contact and/or other operating control, separately or in some combination or sequence, to actuate the tool 3.103 single sequential actuation actuation system in which there is more than one operating control to be activated in a specific sequence to actuate the tool. Ad
41、ditional actuation is possible, when a specific operating control, other than a workpiece contact, is released and re-activated 3.104 full sequential actuation actuation system in which there is more than one operating control to be activated in a specific sequence to actuate the tool. Additional ac
42、tuation is only possible, when all operating controls are released and re-activated in the same sequence 3.105 contact actuation actuation system in which there is more than one operating control and the operating controls can be activated in any sequence to actuate the tool. Additional actuation is
43、 possible, when any operating control is released and re-activated 60745-2-16 IEC:2008 5 3.106 selective actuation actuation system that allows discrete selection of two or more of the following actuation systems: single sequential actuation, full sequential actuation or contact actuation. One or mo
44、re of the selections is single sequential actuation or full sequential actuation 3.107 automatic reversion actuation actuation system with more than one operating control that can be activated in any sequence to actuate the tool. Regardless of the initial sequence, the actuation system is designed t
45、o automatically revert to single sequential actuation, full sequential actuation, neutral or off 3.108 actuate to cause movement of the tool component(s) intended to drive a fastener 3.109 operating control control that separately, or as part of an actuation system, is able to cause the actuation of
46、 a tool 3.110 workpiece contact operating control element or assembly on the tool intended to be activated by the material to be fastened 4 General requirements This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable, except as follows: 5.101 Tests
47、 that are to be conducted by operating the tool without fasteners may subject the tool to abnormal stresses. In order to avoid this, a suitable test fixture may be supplied or a different method of operation suggested. 6 Void 7 Classification This clause of Part 1 is applicable. 8 Marking and instru
48、ctions This clause of Part 1 is applicable, except as follows: 8.1 Addition: for tools with selective actuation or automatic reversion actuation: markings indicating which actuation system is enabled at any time. 6 60745-2-16 IEC:2008 8.12.1 Addition: The specific tool safety warnings for tackers ar
49、e given in 8.12.1.101. The term tacker in these warnings may be replaced by a specific tool designation, such as stapler, nailer, etc. 8.12.1.101 Safety instructions for tackers Tacker safety warnings Always assume that the tool contains fasteners. Careless handling of the tacker can result in unexpected firing of fasteners and personal injury. Do not point the tool towards yourself or anyone nearby
