1、 IEC 60641-3-1Edition 2.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEPressboard and presspaper for electrical purposes Part 3: Specifications for individual materials Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 Car
2、ton comprim et papier comprim usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 1: Exigences pour les cartons comprims, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 et B.6.1 IEC60641-3-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2
3、008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National C
4、ommittee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf
5、indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous a
6、vez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmaili
7、ec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is
8、kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, tech
9、nical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Elec
10、tropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer
11、Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechniqu
12、e Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez v
13、ous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte
14、, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponib
15、le en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appe
16、l Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22
17、 919 02 11 Fax: +41 22 919 03 00 IEC 60641-3-1Edition 2.0 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEPressboard and presspaper for electrical purposes Part 3: Specifications for individual materials Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B
18、.4.3, B.5.1, B.5.3 and B.6.1 Carton comprim et papier comprim usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 1: Exigences pour les cartons comprims, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 et B.6.1 INTERNATIONAL ELECTROTECHNICAL COMMIS
19、SION COMMISSION ELECTROTECHNIQUE INTERNATIONALE LICS 29.035.10 PRICE CODECODE PRIXISBN 2-8318-9897-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60641-3-1 IEC:2008 CONTENTS FOREWORD.3 1 Scope.5 2 Normative refe
20、rences .5 3 Designation (according to IEC 60641-1) .6 4 Requirements .6 Table 1 Requirements for pressboard types B.0, B.2 and B.3.7 Table 2 Pressboard types B.4, B.5 and B.610 60641-3-1 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES Part 3:
21、Specifications for individual materials Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national e
22、lectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spec
23、ifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Interna
24、tional, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The forma
25、l decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for
26、 international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)
27、 In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall
28、 be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liabil
29、ity shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (includ
30、ing legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of t
31、his publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. IEC 60641-3-1 has been prepared by IEC technical committee 15: Solid elect
32、rical insulating materials. This second edition cancels and replaces the first edition published in 1992. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: requirements for types B.0.3 and B.5.3 were added; the precompressed type B
33、.3.1 was divided in B.3.1A and B.3.1B (higher flexibility); types B.6.1 has been replaced with a new type, but the designation has been kept; type B.7.1 has been deleted; the thickness relation of the properties has been simplified; 4 60641-3-1 IEC:2008 the values were adjusted to todays needs of us
34、ers. The text of this standard is based on the following documents: CDV Report on voting 15/390/CDV 15/439/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the
35、ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60641 series, under the general title Pressboard and presspaper for electrical purposes, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result
36、date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60641-3-1 IEC:2008 5 PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES Part 3: Sp
37、ecifications for individual materials Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 1 Scope This International Standard gives the requirements for pressboard for electrical purposes comprised of 100 % sulphate wood pulp or
38、a mixture of sulphate wood pulp and cotton. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that applicatio
39、n and not based on this specification alone. SAFETY WARNING It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. 2 Normative references The following referenced documents are indispensable for the application of
40、this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60641-1:2008, Pressboard and presspaper for electrical purposes Part 1: Definitions and general requirements IEC 60641-2:
41、2004, Pressboard and presspaper for electrical purposes Part 2: Methods of test 6 60641-3-1 IEC:2008 3 Designation (according to IEC 60641-1) Type Composition Description Table B.0.1 B.0.3 100 % sulphate wood pulp Mixture of sulphate wood pulp and cotton Pressboard of particularly high chemical puri
42、ty. 1 B.2.1 B.2.3 100 % sulphate wood pulp Mixture of sulphate wood pulp and cotton Pressboard characterized by high chemical purity. 1 B.3.1 B.3.3 100 % sulphate wood pulp Mixture of sulphate wood pulp and cotton Precompressed pressboard, a hard and rigid board, characterized by high chemical purit
43、y and mechanical strength. Its surface bears a cloth mark. 1 B.4.1 B.4.3 100 % sulphate wood pulp Mixture of sulphate wood pulp and cotton Pressboard characterized by high chemical purity and high oil absorption and capable of being shaped. 2 B.5.1 B.5.3 100 % sulphate wood pulp Mixture of sulphate
44、wood pulp and cotton Mouldable pressboard of high chemical purity and high oil absorption. 2 B.6.1 100 % sulphate wood pulp Pressboard of low porosity for dry type application. 2 NOTE 1 Qualities with specially high densities are designed in column B of B.0.1 (Table 1), B.2.1 (Table 1) and B.6.1 (Ta
45、ble 2). NOTE 2 Precompressed board with high rigidity is designed in column A of B.3.1 (Table 1); precompressed board with moderate rigidity and higher flexibility in column B of B.3.1 (Table 1). 4 Requirements The material shall conform to the general requirements as given in IEC 60641-1 and to the
46、 specific requirements of the appropriate type given in Tables 1 and 2 of this Sheet. 60641-3-1 IEC:2008 7 Table1 Requirementsfor pressboardtypesB.0,B.2 andB.3 B.0 Pressboard ofparticularlyhigh chemical purityB.2 Pressboard characterized byhigh chemical purityB.3 Precompressed pressboard,a hard and
47、rigid board, characterized byhigh chemicalpurityand mechanicalstrength.PropertyIEC 60641-2 Clauseorsubclause UnitMin./ Max.or range B.0.1 A100 % sulphatewood pulpB.0.1 B 100 % sulphatewood pulpB.0.3 Mixture of sulphatewood pulp and cotton B.2.1 A100 % sulphatewood pulpB.2.1 B 100 % sulphatewood pulp
48、B.2.3 Mixture of sulphatewood pulp and cotton B.3.1 A100 % sulphatewood pulpB.3.1 B 100 % sulphatewood pulpB.3.3 Mixture of sulphatewood pulp and cotton Thickness Deviation fromnominal1,6 mm 1,6 mm5 %Max.7,5 5 7,5 5 7,5 5 7,5 5 7,5 5 7,5 5 7,5 5 7,5 5 7,5 5 Apparentdensity 1,6 mm1,6 3,0 mm 3,0 mm6 g/cm Range 1,0 1,2 1,0 1,2 1,0 1,2 1,2 1,3 1,2 1,3 1,2 1,3 1,0 1,2 1,0 1,2 1,0 1,2 1,0 1,2 1,0 1,2 1,0 1,2 1,2 1,3 1,2 1,3 1,2 1,3 1,0 1,2 1,0 1,2 1,0 1,2 1,0 1,2 1,1 1,251,15 1,30,95 1,151,05 1,2 1,1 1,250,95 1,151,05 1,2 1,1 1,25 Tensilestrength Machine direction 1,6 mm1,6 3,0 mm 3,0 mmCrossmach
