1、UL 773 ISBN 1-55989-748-1 Plug-In Locking Type Photocontrols for Use with Area Lighting MARCH 8,2002 - UL 773 trl Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Plug-In, Locking Type Photocontrols for Use with Area Lighting, UL 773 Fourth
2、Edition, Dated January 19, 1995 Revisions: This Standard contains revisions through and including March 8, 2002. The following table lists the future effective dates with the corresponding reference. I Future Effective Dates I References I I Tables 19.2 and 19.3, Paragraph 19.9 I October 17, 2002 I
3、Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. T
4、he revised requirements are substantially in accordance with ULs Bulletin(s) on this subject dated February 5, 2002. The bulletin(s) is now obsolete and may be discarded. The revisions dated March 8, 2002 include a reprinted title page (pagel) for this Standard. As indicated on the title page (page
5、I), this UL Standard for Safety is an American National Standard. Attention is directed to the note on the title page of this Standard outlining the procedures to be followed to retain the approved text of this ANSI/UL Standard. As indicated on the title page (pagel), this UL Standard for Safety has
6、 been adopted by the Department of Defense. The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accu
7、racy of this Standard. ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, owne
8、rships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise wit
9、hout prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard ”as is” without warranty of any kind, either expressed or implied, including but
10、not limited to, the implied warranties of merchantability or fitness for any purpose. tr2 MARCH 8,2002 - UL 773 In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising o
11、ut of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt
12、to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports the electronic versions of its Standards only if they are used under the condi
13、tions and operating systems for which it is intended. ULs support policies may change from time-to-time without notification. UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards with
14、out prior notice. Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while
15、 purchaser is storing an electronic Standard on the purchasers computer system. If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a mult
16、iple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored on a single LAN file-server, or
17、on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and
18、the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of an electronic Standard. Because of differences in the computer/software/printer setup us
19、ed by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee of an organization purchasing a UL Standard can make a copy of the page or pages being viewed for their own fair and/
20、or practical internal use. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have
21、been revised and that have a future effective date are located after the Standard, and are preceded by a ”SUPERSEDED REQUIREMENTS” notice. New product submittals made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requirements
22、 with a specified future effective date, unless the applicant specifically requests that the product be judged under the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition o
23、f continued Listing, Recognitionand Follow-Up Services after the effective date, and understanding of this should be signified in writing. Copyright O 2002 Underwriters Laboratories Inc. MARCH 8. 2002 . UL 773 tr3 This Standard consists of pages dated as shown in the following checklist: Page Date 6
24、-6B . Octoberl7. 2000 12A Octoberl7. 2000 12B . March 16. 1998 13 . January 19. 1995 14-14B March 16. 1998 15 . January 19. 1995 16 August28. 1997 17-18 January 19. 1995 19 . Octoberl7. 2000 20 March 8. 2002 20A . May 21. 1997 20B-22B March 16. 1998 23 . Octoberl7. 2000 January 19. 1995 January 19.
25、1995 29 . Octoberl7. 2000 30 March 8. 2002 30A-30B Octoberl7. 2000 31 . January 19. 1995 32 . January20. 1995 33-34 . March 8. 2002 SRI March 8. 2002 SR2 . Octoberl7. 2000 May 21. 1997 t r4 MARCH 8,2002 - UL 773 No Text on This Page L American National Standard JANUARY 19,1995 (Title Page Reprinted:
26、 March 8, 2002) 1 ANSIIUL 773-1994 UL 773 Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting The First edition was titled Plug-In Locking Type Photocontrols for Use With Area and Roadway Lighting. First Edition - November, 1974 Second Edition - September, 1982 Third Edition
27、-June, 1987 Fourth Edition January 19,1995 Approval as an American National Standard (ANSI) covers the numbered paragraphs on pages dated January 19, 1995. These pages should not be discarded when revised or additional pages are issued if it is desired to retain the ANSI approved text. An effective
28、date included as a note immediately following certain requirements is one established by Underwriters Laboratories Inc. Approved as ANSI/UL 773-1982, January 15, 1982 Approved as ANSI/UL 773-1987, March 20, 1987 Approved as ANSI/UL 773-1994, October 6, 1994 The Department of Defense (DoD) has adopte
29、d UL 773 on May 7, 1984. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most rece
30、ntly adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. ISBN 1-55989-748-1 COPYRIGHT O 1974, 2002 UNDERWRITERS LABORATORIES INC. I 2 UL 773 OCTOBER 17,2000 No Text on This Page OCTOBER 17,2000 UL 773 2A CONTENTS FOREWORD 4
31、INTRODUCTION 1 Scope . 5 4 Undated References 5 Glossary . 6 CONSTRUCTION ALL EQUIPMENT 6 General 6A 7 Insulating Material .6A 8 Corrosion Protection .7 9 Current-Carrying Parts . .I O 10 Spacing . IO CONTROL UNIT 13 Internal Wiring 14 Coil Windings 13 SHORTING AND OPEN-CIRCUIT PLUGS 15 General 13 C
32、ONTROL RECEPTACLE 16 General 13 17 Enclosure 14A 18 Field Wiring . .I6 PERFORMANCE 19 General 20 Intercha 21 Raintightness Test 22 Exposure to Ultravi 24 23 Exposure to Humid 24 Exposure to Low Temperature Test .24 25 Mold Stress Relief Test 26 Resistance to Impact Test .25 27 Horizontal Burning Tes
33、t . .26 28 Normal Temperature Test . .26 29 Operation Test .28 2B UL 773 OCTOBER 17,2000 30 Overload Test 31 Endurance Test . . 32 Dielectric Voltage-Wi . 33 Spark Gap Test . . MANUFACTURING AND PRODUCTION TESTS 34 Production-Line Dielectric Voltage-Withstand .31 35 Details .32 MARKING 36 Details .3
34、2 37 Permanence of Marking .33 OCTOBER 17,2000 UL 773 3 No Text on This Page 4 UL 773 MARCH 8,2002 FOREWORD A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in
35、 the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field experience, and an appreciation of the problems of manufacture, installation, and use derived from consultation with and information obtained from manufacturers,
36、users, inspection authorities, and others having specialized experience. They are subject to revision as further experience and investigation may show is necessary or desirable. B. The observance of the requirements of this Standard by a manufacturer is one of the conditions of the continued coverag
37、e of the manufacturers product. C. A product which complies with the text of this Standard will not necessarily be judged to comply with the Standard if, when examined and tested, it is found to have other features which impair the level of safety contemplated by these requirements. D. A product tha
38、t contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requi
39、rements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requiremen
40、ts shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. E. UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any othe
41、r party. The opinions and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed. UL shall not be responsible to anyone for the use of or reliance upon this Standar
42、d by anyone. UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Standard. F. Many tests required by the Standards of UL are inherently hazardous and adequate safeguards fo
43、r personnel and property shall be employed in conducting such tests. MARCH 8,2002 UL 773 5 INTRODUCTION 1 Scope 1 .I These requirements cover light-sensitive control units of the plug-in, locking type, rated 480 V ac or less, for controlling outdoor electric lighting fixtures used for area lighting.
44、 1.2 These requirements also cover receptacle devices equipped electrically and mechanically to receive the light-sensitive control units described in 1 .I. 1.3 Shorting and open-circuit devices, used as substitutes, where necessary, for the light-sensitive control units described in 1 .I, are also
45、covered by the requirements in this standard, where applicable. 1.4 These requirements do not cover photoelectric switches, intended for residential, industrial or commercial use, of the non-plug-in, nonlocking type. 1.5 Deleted March 8, 2002 and relocated to Foreword Section D 2 Components 2.1 Exce
46、pt as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. 2.1 revised October 17, 2000 2.2 A component is not required to comply with a specific requirement that: a) Involves a feature or characteristic not required in the applic
47、ation of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.2 revised October 17, 2000 2.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.3 revised October 17. 2000 2.4 Specific co
48、mponents are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions. 2.4 revised October 17,
49、 2000 6 UL 773 OCTOBER 17,2000 3 Units of Measurement 3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 3.1 revised October 17. 2000 4 Undated References 4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 5 Glossary 5.1 ACCESSIBLE PART - A part so located that it can be contacted by a person, either directly or by means of a probe or tool. 5.2 CONTROL RECEPTACLE - An outlet device equi