1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1363 Relocatable Power TapsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD
2、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Relocatable Power Taps, UL 1363 Fourth Edition, Dated October 6, 2014 Summary of Topics The Fourth Edition of the Standards for Relocatable Power Taps, UL 1363, has been issued to incorporate the proposals dated June 13, 20
3、14 and August 11, 2014, which include the following: Requirements for RPTs with moveable parts. Requirements for Pedestal Mounted Relocatable Power Taps. RPTs with batteries and low voltage circuits. UL 1363 Scope changes. The new and revised requirements are substantially in accordance with Proposa
4、l(s) on this subject dated June 13, 2014 and August 11, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL pro
5、vides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss
6、 of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for
7、 this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error
8、or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in
9、the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. OCTOBER 6, 2014 UL 1363 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRO
10、DUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 6, 2014 UL 1363 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL October 6, 2014 1 UL 1363 Standard for Relocatable Power Taps The rst edition was titled Tempo
11、rary Power Taps. First Edition June, 1991 Second Edition December, 1996 Third Edition May, 2007 Fourth Edition October 6, 2014 This UL Standard for Safety consists of the Fourth Edition. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals sho
12、uld be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, a
13、nd rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 2 No Text o
14、n This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .7 2 General 8 2.1 Components .8 2.2 Units of measurement .8 2.3 Undated references .8 2.4 Use.9 3 Glossary .9 CONSTRUCTION 4 General .11 5 Enclosure .1
15、2 5.1 General 12 5.2 Metallic .13 5.3 Nonmetallic .13 6 Mechanical Assembly 13 7 Accessibility of Live Parts .14 8 Temporary Mounting Means .17 9 Corrosion Protection .17 10 Insulating Materials .18 11 Power-Supply Cord .18 11.1 General .18 11.2 Bushings 19 12 Strain Relief 20 13 Receptacles 20 14 S
16、upplementary Protection 21 15 Switches .23 16 Live Parts 23 17 Internal Wiring 23 18 Spacings 25 19 Clearance and Creepage Distances Isolated Secondary Circuits 26 20 Printed-Wiring Boards .27 21 Separation of Circuits .28 22 Grounding .28 22.1 General .28 22.2 Bonding .29 23 Storage Compartment .30
17、 24 Cord Reel Feature 30 25 Low Voltage Charging and Isolated Secondary Output Circuits .31 PERFORMANCE 26 General 31 27 Temperature Test .31 28 Dielectric Voltage-Withstand Test .33 29 Leakage Current Test .34 29.1 General .34 29.2 Leakage current after humidity conditioning 37 OCTOBER 6, 2014 RELO
18、CATABLE POWER TAPS - UL 1363 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 30 Grounding Continuity Test .38 31 Fault Current Test 38 31.1 General .38 31.2 Calibration of test circuits 39 32 Overcurrent Test 39 33 Mounting Hole Barrier Tes
19、ts .40 33.1 General .40 33.2 Mounting hole barrier impact test .41 33.3 Mounting hole barrier probe test .42 34 Strain Relief Test .42 35 Impact Tests .43 35.1 General .43 35.2 Drop impact test .43 35.3 Steel sphere impact test 45 35.4 Low-temperature steel sphere impact test .48 36 Crushing Test 48
20、 37 Adequacy of Mounting Test 49 38 Stability Test .50 38.1 General .50 38.2 Test method - general 50 38.3 Pedestal mounted RPT with multiple or articulated columns .50 38.4 Pedestal mounted RPT having provisions for loading .50 38.5 Pedestal mounted RPT over 54 in (1472 mm) in height .50 39 Tipover
21、 Test .51 40 Mold Stress-Relief Distortion Test .51 41 Spill Test 52 42 Water Leakage Test 52 43 Permanence of Cord Tag Test .53 43.1 General .53 43.2 Conditioning .53 43.3 Test Method .54 44 Flexing Endurance Test .54 MANUFACTURING AND PRODUCTION-LINE TESTS 45 Dielectric Voltage-Withstand Test .55
22、46 Grounding Continuity Test .57 RATINGS 47 Details .57 MARKINGS 48 Details .57 INSTRUCTIONS 49 Details .60 OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SUPPLEMENT SA - EXTENDABLE RELOCATA
23、BLE POWER TAPS INTRODUCTION SA1 Scope SA1 SA2 Glossary SA1 CONSTRUCTION SA3 General SA2 SA4 Electrical Contact Devices SA2 SA4.1 General SA2 SA4.2 Mating Connectors SA2 SA4.3 Flammability SA3 SA4.4 Electrical properties .SA3 SA4.5 Thermal properties SA4 SA4.6 Mating connector physical requirements .
24、SA4 SA5 Enclosures SA4 SA6 Performance SA5 SA6.1 General SA5 SA6.2 Locking and latching tests SA5 SA6.3 Mating connector tests .SA6 SA7 Markings .SA7 SA8 Instruction Manual .SA8 SUPPLEMENT SB - RELOCATABLE POWER TAPS INCORPORATING BATTERIES INTRODUCTION SB1 Scope SB1 SB2 Glossary SB1 SB3 General SB2
25、 SB4 Battery Chargers and Circuits .SB2 CONSTRUCTION SB5 Batteries SB2 SB5.1 General SB2 SB5.2 Non-replaceable batteries .SB3 SB5.3 Technician replaceable batteries SB3 SB5.4 User replaceable batteries SB3 SB5.5 Battery packs .SB3 SB5.6 Lithium-ion battery cells or packs SB3 SB6 Battery Compartments
26、 .SB4 SB7 Battery Circuits SB5 SB8 Battery Charging SB5 OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PERFORMANCE SB9 Temperature Test SB5 SB9.1 General SB5 SB9.2 Temperature test method I
27、.SB6 SB9.3 Temperature test method II .SB6 SB9.4 Temperature test method III SB6 SB10 Discharge Test .SB6 SB11 Lithium-ion Batteries SB7 SB11.1 Lithium-ion battery abnormal tests SB7 SB11.2 Impact tests .SB8 SB12 Markings SB9 SB13 Installation and Operation Instructions .SB9 APPENDIX A Standards for
28、 ComponentsA1 OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover indoor use cord and plug connected, relocatable power taps (RPT) rated 250 V AC
29、 or less and 20 Amperes or less. RPT are for use as a movable power supply connection for cord and plug connected electrical utilization equipment in accordance with the National Electric Code, NFPA 70. 1.2 A cord and plug connected product as described in 1.1 with less than three receptacle outlets
30、 that employs an electromagnetic interference lter is covered under the Standard for Electromagnetic Interference Filters, UL 1283. 1.3 A cord and plug connected product as described in 1.1 with less than three receptacle outlets that employs a surge protective device (SPD) is covered under the Stan
31、dard for Surge Protective Devices, UL 1449. 1.4 A cord and plug connected product as described in 1.1 that employs ground-fault protection is covered under the requirements for portable GFCIs in the Standard for Ground-Fault Circuit Interrupters, UL 943. 1.5 This standard does not cover RPT intended
32、 for use with medical equipment. 1.6 A RPT may employ an integral cord reel for the supply cord and attachment plug. A cord reel provided with pull out receptacle outlets or cord connectors is covered under the Standard for Cord Reels, UL 355. 1.7 These requirements do not cover RPTs with work surfa
33、ces or surfaces intended to support weight loads other than as specied in 3.11 for the storage of hand-held electronic devices and charging equipment such as a cell phone, cell phone charger and the like. 1.8 These requirements cover RPTs provided with isolated secondary circuits. 1.9 These requirem
34、ents cover RPTs provided with batteries located in isolated secondary circuits. See UL 1363 Supplement SB Relocatable Power Taps Incorporating Batteries. 1.10 A product that has a battery backup feature or other uninterruptible power supply equipment located in the Primary Circuit shall comply with
35、the applicable requirements in the Standard for Uninterruptible Power Supply Equipment, UL 1778. OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2 General 2.1 Components 2.1.1 Except as indic
36、ated in 2.1.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by this standard. 2.1.2 A component is not required to comply with a specic requirement that
37、: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.1.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.1
38、.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. 2.2 Units of me
39、asurement 2.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 2.2.2 Unless otherwise indicated, all voltage and current values mentioned in this standard are root-mean-square (rms). 2.3 Undated references 2.3.1 Any undated re
40、ference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PER
41、MISSION FROM UL 2.4 Use 2.4.1 A RPT is intended to be connected to a permanently installed branch circuit receptacle outlet. 2.4.2 A RPT is not intended to be permanently mounted. 2.4.3 A RPT is not intended to be series connected (daisy chained) to other RPT or to extension cords. 3 Glossary 3.1 Fo
42、r the purpose of this standard the following denitions apply. 3.2 ATTACHMENT PLUG A male contact device for the temporary connection of a exible cord or cable to a receptacle outlet or cord connector. 3.3 CORD CONNECTOR A female contact device assembled or molded on exible cord to allow a detachable
43、 electrical connection to an attachment plug. 3.4 ISOLATED SECONDARY CIRCUIT A circuit derived from an isolating source (such as a transformer, optical isolator, limiting impedance or electro-mechanical relay) and having no direct connection back to the primary circuit (other than through the ground
44、ing means). A secondary circuit that has a direct connection back to the primary circuit is considered part of the primary circuit. 3.5 MEANS FOR TEMPORARY MOUNTING A mounting method that does not require the use of tools for mounting or dismounting the RPT and conceals the head of a screw or other
45、fastener so that it cannot be tightened after the RPT is mounted. 3.6 OVERCURRENT PROTECTION (OCP) DEVICE A supplementary protection device provided within a RPT that provides overcurrent and short-circuit protection. 3.7 PEDESTAL MOUNTED RPT A RPT assembly integral to or supported by a column(s) wh
46、ich is in turn provided with a base for stability. 3.8 PORTABLE (Relocatable) Meets all of the following: a) Not secured to the building structure unless provided with a securement means that allows the RPT to be removed without the use of tools, and b) Connected electrically to an electrical source
47、 of supply with a power supply cord and attachment plug. 3.9 PRIMARY CIRCUIT A circuit in which the wiring and components are conductively connected to the AC power interface. 3.10 RECEPTACLE OUTLET A female contact device mounted within an electrical enclosure to allow a detachable electrical conne
48、ction of an attachment plug. 3.11 RELOCATABLE POWER TAP (RPT) An electrical enclosure provided with an attached power supply cord and attachment plug for connection to a permanently installed branch circuit receptacle outlet. The electrical enclosure may be provided with one or more receptacle outle
49、ts. The RPT may also be provided in any combination of the following congurations: OCTOBER 6, 2014 RELOCATABLE POWER TAPS - UL 1363 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL a) The electrical enclosure connected to the cord and attachment plug may be supplied with up to six lengths of exible cord not exceeding 1-1/2 feet in length; each length shall be terminated in a separate single cord connector. Refer to 11.1 fo
