1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a
2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): DMLW, IMSRStandard Number: UL 1017Edition Date: September 10, 2010Edition Number: 8Section / Paragraph Reference: 3.1.1, 4.4.1, 4.8.1, Appendix ASubject: (1)
3、 UL and CSA Component Requirement, (2) Cord Reels, and (3) Revisionsto Annex ASupercedes prior Certification Requirement Decision issued 2008-11-20DECISION:3.1 Components3.1.1 Except as indicated in Clause 3.1.2, a component of a product covered by this Standard shallcomply with the requirements for
4、 that component. See Annex A for a list of standards coveringcomponents generally used in the products covered by this Standard. A component shall comply with boththe Underwriters Laboratories Inc. and the Canadian Standards Association standard for the component.3.1.1A A component shall comply with
5、 both the Underwriters Laboratories Inc. and the CanadianStandards Association standard for the component, unless otherwise indicated in the body of thisstandard.4.4 Supply connections4.4.1 Cord-connected equipment4.4.1.22 A component cord reel (or cord winder) shall comply with the applicable const
6、ruction andperformance requirements of UL 1017/ CSA C22.2 No. 243. A cord reel that complies with UL 355 andCSA C22.2 No. 21 is considered to fulfill these requirements only if it additionally complies with theapplicable cord reel tests described in Clauses 5.8.3, 5.12.3, and 5.16 of this standard.A
7、ppendix AStandards for componentsA.1 Component standardsCSA StandardsC22.2 No. 38-95 05Thermoset Insulated Wires and CablesC22.2 No. 43-M1984 04LampholdersC22.2 No. 49-92 06Flexible Cords and CablesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM
8、 ULC22.2 No. 59.1-1987Fuses (Both Plug and Cartridge-Enclosed Types)C22.2 No. 66.1-06Low-Voltage Transformers Part 1: General RequirementsC22.2 No. 66.2-06Low-Voltage Transformers Part 2: General Purpose TransformersC22.2 No. 66.3-06Low-Voltage Transformers Part 3: Class 2 and Class 3 TransformersC2
9、2.2 No. 74-92 96Equipment for Use with Electric Discharge LampsC22.2 No. 75-M1983 08Thermoplastic-Insulated Wires and CablesC22.2 No. 100-95 04Motors and GeneratorsC22.2 No. 111-M1986 00General Use SwitchesC22.2 No. 248-94 00 SeriesLow Voltage FusesC22.2 No. 61058-1-05Switches for Appliances, Part 1
10、 General RequirementsUL StandardsUL 198FFuses, PlugUL 248Low-Voltage Fuses, SeriesUL 355Cord ReelsUL 5085-1Low-Voltage Transformers Part 1: General RequirementsUL 5085-2Low-Voltage Transformers Part 2: General Purpose TransformersUL 5085-3Low-Voltage Transformers Part 3: Class 2 and Class 3 Transfor
11、mersUL 61058-1Switches for Appliances, Part 1 General RequirementsSTANDARD NUMBER: UL 1017 -2-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 133Wires and Cables With Varnish Cloth InsulationRATIONALE FOR DECISION:This Certification Decisio
12、n includes a clarification regarding the cord reel requirements. This proposalreflects, and is intended to document, present UL practice regarding the testing and investigation of cordreels.This Certification Decision also includes two editorial revisions. One is a revision to Clause 3.1.1 andadditi
13、on of new Clause 3.1.1A that highlights the requirement that components have to meet both UL andCSA component standard requirements by separating it out into its own clause. The second is a revisionto the standard references in Annex A. The proposed revisions update the standards to their presentedi
14、tions and/or issue dates.This revised Certification Requirement Decision aligns references with the Eighth Edition of UL 1017.Copyright 2010 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification
15、Requirement Decisions it may issue or that they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent formal interpretations of thestandard under Ame
16、rican National Standards Institute (ANSI) processes. UL shall not be responsible toanyone for the use of or reliance upon Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the
17、 use or reliance upon Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersSTANDARD NUMBER: UL 1017 -3-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1017 -4-No Text on This Page
