1、 TIA-864-D-1E (Addendum to TIA-864-D) April 2014Recommended Minimum Performance Standards for cdma2000High Rate Packet Data Access Network NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purch
2、asers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of T
3、IA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accord
4、ance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems a
5、ssociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for inf
6、ormation purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company (From Project No. TIA-PN-864-D-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA o
7、r any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued paten
8、ts, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA t
9、akes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge wh
10、ether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Refer
11、ences to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as def
12、ined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Man
13、ual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applicat
14、ions. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING
15、WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR T
16、HE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE C
17、ONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS
18、, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND TH
19、ESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0032-D v2.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication December 2001 Rev 0 v2.0 Bug Fixes January 2004 Rev A v1.0 Support for HRPD Rev A December 2005 Rev A v2.0 Bug Fixes August 2
20、007 Rev B v1.0 Support for HPPD Rev B May 2008 Rev C v1.0 Added Pico and Femto September 2010 Rev D v1.0 Added Japan Radio Law related changes, including BC6 emission, BC3 disband, and BC0 subclasses 2,3. Added single antenna femto/pico base station fading channel performance tests April 2012 Rev D
21、v2.0 Bug fixes March 2014 3GPP2 C.S0032-D v2.0 CONTENTS i FOREWORD xv 1 NOTES . xvi 2 1 INTRODUCTION . 1-1 3 1.1 Scope 1-1 4 1.2 Terms and Definitions . 1-1 5 1.2.1 Definitions . 1-1 6 1.2.2 Terms 1-8 7 1.3 HRPD Equations . 1-10 8 1.3.1 Transmit Power at the Access Terminal 1-10 9 1.3.2 Received Sig
22、nal Strength 1-12 10 1.3.2.1 Connection Setup State . 1-13 11 1.3.2.1.1 Access Probe Preamble Portion 1-13 12 1.3.2.1.2 Access Probe Capsule Portion 1-13 13 1.3.2.2 Connected State . 1-13 14 1.3.2.2.1 DRC Non-Gated Transmission . 1-13 15 1.3.2.2.2 DRC Gated Transmission 1-15 16 1.4 Requirements Term
23、inology 1-16 17 1.5 References 1-16 18 2 STANDARD EMISSIONS MEASUREMENT PROCEDURES 2-1 19 2.1 Radiated Emissions Measurement 2-1 20 2.1.1 Standard Radiation Test Site 2-1 21 2.1.2 Search Antenna . 2-1 22 2.1.3 Field-Strength Measurement 2-2 23 2.1.4 Frequency Range of Measurements 2-2 24 2.1.5 Test
24、Ranges . 2-2 25 2.1.5.1 30-Meter Test Range 2-2 26 2.1.5.2 3-Meter Test Range 2-3 27 2.1.6 Radiated Signal Measurement Procedures . 2-3 28 2.2 AC Power Line Conducted Emissions Measurement 2-4 29 2.2.1 Standard AC Power Line Conducted Emissions Test Site . 2-4 30 2.2.2 Line Impedance Stabilization N
25、etwork (LISN) Unit 2-4 31 2.2.3 Standard Test Site Measurements 2-5 32 3GPP2 C.S0032-D v2.0 CONTENTS ii 2.2.3.1 Floor Standing Equipment . 2-5 1 2.2.3.2 Table Top Mounted Equipment 2-5 2 2.2.3.3 Measurement Procedure 2-5 3 2.2.3.4 Frequency Range of Measurements . 2-5 4 2.2.4 End User or Manufacturi
26、ng Plant Test Sites 2-5 5 3 Receiver Minimum Standards 3-1 6 3.1 Frequency Requirements 3-1 7 3.2 Access Probe Acquisition 3-1 8 3.2.1 Definition 3-1 9 3.2.2 Method of Measurement 3-1 10 3.2.3 Minimum Standard . 3-3 11 3.3 Reverse Traffic Channel Demodulation . 3-4 12 3.3.1 Data Channel Demodulation
27、 Performance . 3-4 13 3.3.1.1 Definition 3-4 14 3.3.1.2 Method of Measurement 3-5 15 3.3.1.3 Minimum Standard . 3-8 16 3.3.2 DRC Channel Demodulation Performance . 3-9 17 3.3.2.1 Method of Measurement 3-9 18 3.3.2.2 Minimum Standard . 3-10 19 3.3.3 ACK Channel Demodulation Performance 3-11 20 3.3.3.
28、1 Definition 3-11 21 3.3.3.2 Method of Measurement 3-12 22 3.3.3.3 Minimum Standard . 3-13 23 3.3.4 DSC Channel Demodulation Performance 3-14 24 3.3.4.1 Definition 3-14 25 3.3.4.2 Method of Measurement 3-15 26 3.3.4.3 Minimum Standard . 3-15 27 3.4 Receiver Performance . 3-16 28 3.4.1 Receiver Sensi
29、tivity 3-16 29 3.4.1.1 Definition 3-16 30 3.4.1.2 Method of Measurement 3-16 31 3.4.1.3 Minimum Standard . 3-17 32 3GPP2 C.S0032-D v2.0 CONTENTS iii 3.4.2 Receiver Dynamic Range 3-17 1 3.4.2.1 Definition . 3-17 2 3.4.2.2 Method of Measurement 3-17 3 3.4.2.3 Minimum Standard 3-18 4 3.4.3 Single Tone
30、Desensitization . 3-18 5 3.4.3.1 Definition . 3-18 6 3.4.3.2 Method of Measurement 3-18 7 3.4.3.3 Minimum Standard 3-20 8 3.4.4 Intermodulation Spurious Response Attenuation . 3-21 9 3.4.4.1 Definition . 3-21 10 3.4.4.2 Method of Measurement 3-21 11 3.4.4.3 Minimum Standard 3-23 12 3.4.5 Adjacent Ch
31、annel Selectivity 3-23 13 3.4.5.1 Definition . 3-23 14 3.4.5.2 Method of Measurement 3-23 15 3.4.5.3 Minimum Standard 3-24 16 3.4.6 Receiver Blocking Characteristics 3-24 17 3.4.6.1 Definition . 3-24 18 3.4.6.2 Method of Measurement 3-24 19 3.4.6.3 Minimum Standard 3-25 20 3.5 Limitations on Emissio
32、ns 3-25 21 3.5.1 Conducted Spurious Emissions . 3-25 22 3.5.1.1 Definition . 3-25 23 3.5.1.2 Method of Measurement 3-26 24 3.5.1.3 Minimum Standard 3-26 25 3.5.2 Radiated Spurious Emissions 3-27 26 3.6 Received Signal Quality Indicator (RSQI) . 3-27 27 3.6.1 Definition . 3-27 28 3.6.2 Method of Meas
33、urement 3-27 29 3.6.3 Minimum Standard 3-28 30 4 Transmitter Minimum Standards . 4-1 31 4.1 Frequency Requirements 4-1 32 3GPP2 C.S0032-D v2.0 CONTENTS iv 4.1.1 Frequency Coverage 4-1 1 4.1.2 Frequency Tolerance 4-1 2 4.1.2.1 Definition 4-1 3 4.1.2.2 Method of Measurement 4-1 4 4.1.2.3 Minimum Stand
34、ard . 4-1 5 4.2 Modulation Requirements . 4-1 6 4.2.1 Synchronization and Timing 4-1 7 4.2.1.1 Pilot Channel Time Tolerance 4-1 8 4.2.1.1.1 Definition 4-2 9 4.2.1.1.2 Method of Measurement 4-2 10 4.2.1.1.3 Minimum Standard . 4-2 11 4.2.2 Waveform Quality 4-2 12 4.2.2.1 Definition 4-2 13 4.2.2.2 Meth
35、od of Measurement 4-2 14 4.2.2.3 Minimum Standard . 4-3 15 4.2.3 MAC Channel 4-4 16 4.2.3.1 RPC Channel time Response 4-4 17 4.2.3.1.1 Definition 4-4 18 4.2.3.1.2 Method of Measurement 4-4 19 4.2.3.1.3 Minimum Standard . 4-6 20 4.2.4 Forward Traffic Channel 4-7 21 4.2.4.1 Forward Traffic Channel Res
36、ponse to ACK Channel . 4-7 22 4.2.4.1.1 Definition 4-7 23 4.2.4.1.2 Method of Measurement 4-7 24 4.2.4.1.3 Minimum Standard . 4-7 25 4.3 RF Output Power Requirements . 4-8 26 4.3.1 Total Power 4-8 27 4.3.1.1 Definition 4-8 28 4.3.1.2 Method of Measurement 4-8 29 4.3.1.3 Minimum Standard . 4-8 30 4.3
37、.2 Pilot/MAC Channel Power . 4-9 31 4.3.2.1 Definition 4-9 32 3GPP2 C.S0032-D v2.0 CONTENTS v 4.3.2.2 Method of Measurement 4-9 1 4.3.2.3 Minimum Standard 4-10 2 4.3.3 Code Domain Power . 4-11 3 4.3.3.1 Code Domain Power of MAC Channel . 4-11 4 4.3.3.1.1 Definition 4-11 5 4.3.3.1.2 Method of Measure
38、ment 4-11 6 4.3.3.1.3 Minimum Standard . 4-11 7 4.3.3.2 Code Domain Power of Forward Traffic and Control Channels 4-12 8 4.3.3.2.1 Definition 4-12 9 4.3.3.2.2 Method of Measurement 4-12 10 4.3.3.2.3 Minimum Standard . 4-12 11 4.3.4 Femto Cell Transmission Authorization 4-12 12 4.3.4.1 Definition . 4
39、-12 13 4.3.4.2 Method of Measurement 4-12 14 4.3.4.3 Minimum Standard 4-13 15 4.4 Limitations on Emissions 4-13 16 4.4.1 Conducted Spurious Emissions . 4-13 17 4.4.1.1 Macro Cell Access Network 4-13 18 4.4.1.1.1 Definition 4-13 19 4.4.1.1.2 Method of Measurement 4-13 20 4.4.1.1.3 Minimum Standard .
40、4-15 21 4.4.1.2 Pico Cell Access Network and Femto Cell . 4-22 22 4.4.1.2.1 Definition 4-22 23 4.4.1.2.2 Method of Measurement 4-22 24 4.4.1.2.3 Minimum Standard . 4-26 25 4.4.2 Radiated Spurious Emissions 4-31 26 4.4.3 Inter-Sector Transmitter Intermodulation 4-31 27 4.4.3.1 Definition . 4-31 28 4.
41、4.3.2 Method of Measurement 4-31 29 4.4.3.3 Minimum Standard 4-32 30 4.4.4 Occupied Bandwidth 4-33 31 4.4.4.1 Definition . 4-33 32 3GPP2 C.S0032-D v2.0 CONTENTS vi 4.4.4.2 Method of Measurement 4-33 1 4.4.4.3 Minimum Standard . 4-33 2 5 General Requirements 5-1 3 5.1 Temperature and Power Supply Vol
42、tage 5-1 4 5.1.1 Definition 5-1 5 5.1.2 Method of Measurement 5-1 6 5.1.3 Minimum Standard . 5-2 7 5.2 High Humidity 5-2 8 5.2.1 Definition 5-2 9 5.2.2 Method of Measurement 5-2 10 5.2.3 Minimum Standard . 5-2 11 5.3 AC Power Line Conducted Emissions 5-2 12 5.3.1 Definition 5-2 13 5.3.2 Method of Me
43、asurement 5-3 14 5.3.3 Minimum Standard . 5-3 15 6 Standard Test Conditions . 6-1 16 6.1 Standard Equipment 6-1 17 6.1.1 Basic Equipment . 6-1 18 6.1.2 Associated Equipment . 6-1 19 6.2 Standard Environmental Test Conditions . 6-1 20 6.3 Standard Conditions for the Primary Power Supply 6-1 21 6.3.1
44、General . 6-1 22 6.3.2 Standard DC Test Voltage from Accumulator Batteries 6-1 23 6.3.3 Standard AC Voltage and Frequency . 6-2 24 6.4 Standard Test Equipment . 6-2 25 6.4.1 Channel Simulator 6-2 26 6.4.2 Waveform Quality Measurement Equipment 6-5 27 6.4.2.1 Rho Meter 6-5 28 6.4.2.2 Code Domain Meas
45、urement Equipment . 6-9 29 6.4.3 Access Terminal Simulator 6-13 30 6.4.4 AWGN Generator . 6-14 31 6.4.5 CW Generator 6-14 32 3GPP2 C.S0032-D v2.0 CONTENTS vii 6.4.6 Spectrum Analyzer . 6-15 1 6.4.7 Average Power Meter 6-16 2 6.4.8 RF Output Load . 6-16 3 6.5 Functional System Setups 6-16 4 6.5.1 Fun
46、ctional Block Diagrams 6-16 5 6.5.2 General Comments 6-22 6 6.6 Standard Duty Cycle . 6-23 7 6.7 Error Rates Measurement . 6-23 8 6.7.1 Packet Error Rates Measurement . 6-23 9 6.7.2 DRC Channel Performance Metrics 6-23 10 6.7.3 ACK Channel Performance Metrics 6-23 11 6.7.4 DSC Channel Performance Me
47、trics 6-24 12 6.8 Confidence Limits . 6-24 13 Annex A SELECTED PERFORMANCE REQUIREMENTS TABLES (nORMATIVE) . A-1 14 A.1 Demodulation Requirements . A-1 15 A.1.1 Access Probe Acquisition. A-1 16 A.1.1.1 Method of Measurement . A-1 17 A.1.1.2 Minimum Standard . A-3 18 A.1.2 Data Channel Demodulation P
48、erformance A-4 19 A.1.2.1 Method of Measurement . A-4 20 A.1.2.2 Minimum Standard . A-15 21 A.1.3 DRC Channel Demodulation Performance . A-26 22 A.1.3.1 Method of Measurement . A-27 23 A.1.3.2 Minimum Standard . A-32 24 A.1.4 ACK Channel Demodulation Performance . A-39 25 A.1.4.1 Method of Measureme
49、nt . A-40 26 A.1.4.2 Minimum Standard . A-43 27 A.1.5 DSC Channel Demodulation Performance . A-47 28 A.1.5.1 Method of Measurement . A-47 29 A.1.5.2 Minimum Standard . A-50 30 31 32 33 3GPP2 C.S0032-D v2.0 CONTENTS viii This page intentionally left blank. 1 3GPP2 C.S0032-D v2.0 ix FIGURES 1 Figure 4.2.3.1.2-1 Power Up Command Measurement Interval (Subtype 0 or 1 Physical 2 Layer) 4-5 3 Figure 4.2.3.1.2-2 Power Down Command Measurement Interval (Subtype 0 or 1 Physical 4 Layer) 4-5 5 Figure 4.2.3.1.2-3 Power Up Command Measurement Interval (Subtype 2 Physical Layer) 4-6 6 7 Figure 4.2.
