1、 TIA-664.000-B-4E November 2011Wireless Features Description NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assist
2、ing the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and
3、 Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By s
4、uch action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the re
5、sponsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4652.000-RV2-AD4E-A, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that
6、the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual pro
7、perty rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof
8、 is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left
9、to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its content
10、s. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consis
11、ts of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of enc
12、ouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of E
13、ssential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WAR
14、RANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA
15、 EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN TH
16、E DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (
17、INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAM
18、ENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Revision History Revision Date Rev. 0 Initial Publication (Note 1) December 1999 Rev. A Note 2 June 2007 Rev. A v2.0 Updated Publication (Note 3) July 2008 Notes: 1. S.R0006-0
19、v1.0 was published as a single part. 2. All parts of S.R0006-A v1.0 replace S.R0006-0 v1.0. 3. S.R0006-000-A v2.0 lists new feature descriptions for S.R0006-807-A (Generic Broadcast Teleservice Transport Capability: Network Perspective) and S.R0006-808-A (Circuit-Switched Call Precedence Over CDMA P
20、acket Data Session). S.R0006-000-A v2.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000-i ContentsWireless Features DescriptionCONTENTSList of Tables ii1 Introduction 11.1 General.11.2 Scope11.3 Organization.22 References 32.1 Normati
21、ve References32.2 Informative References43 Definitions and Concepts .63.1 Definitions .63.2 Feature Description Concepts and Template .243.2.1 Normal Procedures With Successful Outcome .243.2.2 Exception Procedures or Unsuccessful Outcome263.2.3 Alternative Procedures 273.2.4 Interactions with Other
22、 Wireless Services 273.3 Typography284 Listing of Series Parts 29S.R0006-000-A v2.0List of Tables 000-ii123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960LIST OF TABLESTable 1: Feature Code String Items. 13Table 2: Modifier Digit Assignmen
23、ts16Table 3: Modifier Digit Assignments for WIN-Based Services . 16Table 4: Listing of Parts 29S.R0006-000-A v2.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000-1 Introduction1 INTRODUCTIONThis Specification presents a recommended pl
24、an for the implementation of uniformfeatures for use in wireless telecommunications systems. Its intent is to describe servicesand features so that the manner in which they are used by a subscriber can remainreasonably consistent from system to system. It is not intended to require that specificserv
25、ice offerings be required of all service providers.1.1 GeneralThis document describes a subset of wireless features that a wireless subscriber can use inany wireless system into which the subscriber roams. The selected subset consists offeatures that are more likely to be used when roaming, and feat
26、ures that are necessary toimplement full intersystem operation.1.2 ScopeThis document provides descriptions and standard operational procedures for a number ofspecific features. These particular features were selected with the following considerationsin mind: The list of features is restricted to th
27、ose features that afford the subscriber anacceptable degree of control over common call situations. No attempt is made to“standardize” all of the features that are, may be, or could be made available in thewireless industry. The objective is to provide subscribers with reasonable comfortand familiar
28、ity as they move between systems while not infringing on the need ofmanufacturers and service providers to compete by means of nonstandardofferings. All selected features can be implemented, in their “standard” form by MSCsdesigned to serve smaller markets; i.e., standard procedures should not haveu
29、nduly burdensome memory and processing capacity requirements. Individualmanufacturers may offer “enhanced” versions of standard features; however, suchenhancements should not surprise the unsuspecting subscriber by deviations fromthe standard. Feature options should provide flexibility of the manufa
30、cturers andservice providers offerings. Certain features may also be implemented using a “Wireless Intelligent Network”(WIN) architecture, in which case the functionality required to provide features(such as service switching, service control, service data, and special resources)may be distributed t
31、hroughout the network. In such a case, the service control orservice data functions associated with features may be distributed among theMSC, HLR, SCP, SN, IP, or other network elements, and the interactions betweenfeatures must be managed carefully to prevent undesirable or unexpected results.Featu
32、re Interaction Manager and Service Interaction Manager procedures shouldbe implemented in networks employing such an architecture. The features selected provide as much home service provider control over thefeature operation as possible. This is to allow for competition betweenmanufacturers and serv
33、ice providers, while providing seamless feature operationto the subscribers. The mechanisms for these features should allow other homesystem controlled features to be implemented without sacrificing seamlessness.S.R0006-000-A v2.0Introduction 000-21234567891011121314151617181920212223242526272829303
34、132333435363738394041424344454647484950515253545556575859601.3 OrganizationThis Specification is organized as a series of documents. This document is organized asfollows: Section 2 entitled “References” provides a list of references used with thisSpecification. Section 3 entitled and “Definitions an
35、d Concepts” defines terminology andacronyms used in this Specification. The last subsection of Section 3 defines atemplate that must be followed by all feature descriptions. Section 4 entitled “Listing of Series Parts” lists the Parts name, revision, and dateof publication.The other documents in thi
36、s Specification are categorized as follows: Part 100 series entitled “General Background and Assumptions” identifies thegeneral background and assumptions under which the procedures for providingthe identified services are designed to operate. Part 500 series entitled “Voice Feature Descriptions” de
37、scribes supported voicefeature behavior and interactions with other features. Part 600 series entitled “Short Message Service Feature Descriptions” describesthe bearer services and teleservices to support short message services. Part 700 series entitled “Mobile Station Functionality” describes the f
38、unctionalitythat may be offered in a terminal device. Part 800 series entitled “System Functionality” describes the functionalityassumed for the wireless system. Other part series are reserved for future use.S.R0006-000-A v2.012345678910111213141516171819202122232425262728293031323334353637383940414
39、2434445464748495051525354555657585960000-3 References2 REFERENCES2.1 Normative ReferencesThe following standards and specifications contain provisions that, through reference inthis text, constitute provisions of this Specification. At the time of publication, the editionsindicated were valid. All s
40、tandards are subject to revision, and parties to agreements basedon this Specification are encouraged to investigate the possibility of applying the mostrecent editions of the standards indicated below.CDMA C.S0001-D v2.0, cdma2000 Standards for Spread Spectrum Systems,3rd Generation Partnership Pro
41、ject 2; 2005.CDMA_DSO C.S0017-A v1.0, Data Service Options for Spread Spectrum Systems;3rd Generation Partnership Project 2; 2004.CDMA_IP X.S0011-D v1.0, cdma2000 IP Network Standard, 3rd GenerationPartnership Project 2; 2006.DMH X.S0014-E v1.0, Wireless Radio Telecommunications IntersystemNon-Signa
42、ling Data Communication DMH (Data Message Handler),3rd Generation Partnership Project 2; 2005.IP_NAM S.R0037-B v1.0, IP Network Architecture Model for cdma2000Spread Spectrum Systems; 3rd Generation Partnership Project 2; 2007.MAP N.S0005-0 v1.0, Cellular Radiotelecommunications IntersystemOperation
43、s; 3rd Generation Partnership Project 2; 1997.X.S0004, Mobile Application Part, 3rd Generation PartnershipProject 2.MAP_LCS X.S0002-0 v2.0, Location Services Enhancements; 3rd GenerationPartnership Project 2; 2006.NAM S.R0005-B v2.0 Network Reference Model for cdma2000 SpreadSpectrum Systems - Revis
44、ion B; 3rd Generation Partnership Project 2;2007.T1.611 ANSI T1.611-1991(R2003), Signalling System Number 7 (SS7)Supplementary Services for Non-ISDN-Subscribers; AmericanNational Standards Institute, Inc.; 2003.T1.209 ANSI T1.209-2003, Operations, Administration, Maintenance, andProvisioning (OAMAme
45、rican National Standards Institute, Inc.; 2003.T1.667 ANSI T1.667-2002(2007), American National Standard forTelecommunications Intelligent Network; American NationalStandards Institute, Inc.; 2002.E.161 Recommendation E.161, Arrangement of digits, letters and symbolson telephones and other devices t
46、hat can be used for gaining access toa telephone network; ITU-T; May 1995.E.164 Recommendation E.164, The International Public TelecommunicationNumbering Plan; ITU-T; May 1995.S.R0006-000-A v2.0References 000-4123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495
47、051525354555657585960E.165 Recommendation E.165, Timetable for Coordinated Implementationof the Full Capability of the Numbering Plan for the ISDN Era;Volume II - Fascicle II.2; Telephone Network and ISDNOperation,Numbering, Routing and Mobile Service; CCITT (now ITU-T); 1989.E.212 Recommendation E.
48、212, The International Identification Plan forMobile Terminals and Mobile Users; ITU-T; November 1998.I.130 Recommendation I.130, Method for the Characterization ofTelecommunication Services Supported by an ISDN and NetworkCapabilities of an ISDN; ITU-T; November 1988.2.2 Informative ReferencesANS-6
49、60 ANSI/TIA/EIA Standard 660, Uniform Dialing Procedures and CallProcessing Treatment for Use in Cellular Radio Telecommunications;Telecommunications Industry Association; 1996.LBSS S.R0019, Location-Based Services System (LBSS); 3rd GenerationPartnership Project 2; September 2000.RFC1661 Request for Comments: 1661, STD: 51, The Point-to-Point Protocol,Internet Engineering Task Force; July 1994.RFC1662 Request for Comments: 1662, PPP in HDC-like Framing, InternetEngineering Task Force; July 1994.RFC1994 Request for Comments:
