1、 TIA-2000.2-F-1E July 2014Physical Layer Standard for cdma2000Spread Spectrum Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvemen
2、t of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conform
3、ing to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (
4、ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory r
5、equirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsemen
6、t by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-2000.2-F-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form
7、; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties.
8、TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims
9、 any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are
10、reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organiza
11、tion (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) t
12、hen (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and pub
13、lished pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance
14、with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCER
15、NING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESEN
16、TATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL
17、DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BR
18、EACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOU
19、T SUCH LIMITATIONS. 3GPP2 C.S0002-F v2.0 Revision History Revision Description of Changes Date Rev.0 v1.0 Initial publication October 1999 Rev.0 Addendum 2 v1.0 Addendum May 2001 Rev.0 v3.0 Bug fix July 2001 Rev.A v1.0 Revision July 2000 Rev.A v5.0 Bug fix July 2001 Rev.A v6.0 Bug fix Feburary 2002
20、Rev.B v1.0 Revision April 2002 Rev.C v1.0 Revision May 2002 Rev.C v2.0 Bug fix August 2004 Rev.D v1.0 Revision March 2004 Rev.D v2.0 Bug fix October 2005 Rev.E v1.0 Initial publication September 2009 Rev.E v2.0 Bug fix June 2010 Rev.E v3.0 Bug fix June 2011 Rev.F v1.0 Added M2M related changes Decem
21、ber 2012 Rev.F v2.0 Bug fix. (Note: No change in this volume. Republished with other volumes) May 2014 3GPP2 C.S0002-F v2.0 i CONTENTS 1 FOREWORD xliii 2 NOTES . xlv 3 1 GENERAL 1-1 4 1.1 Terms 1-1 5 1.2 Numeric Information . 1-16 6 1.2.1 Mobile Station Stored Parameters 1-16 7 1.2.2 Base Station Pa
22、rameters 1-21 8 1.2.3 MAC Interface 1-23 9 1.2.3.1 Service Interfaces . 1-23 10 1.2.3.2 MAC Interface Parameters 1-24 11 1.2.3.3 Service Interface Primitives Received by the Physical Layer 1-26 12 1.2.3.4 Service Interface Primitives Sent from the Physical Layer . 1-28 13 1.3 CDMA System Time . 1-30
23、 14 1.4 Tolerances . 1-32 15 1.5 Reserved Bits . 1-32 16 1.6 References . 1-32 17 1.7 Requirements Language 1-34 18 1.8 Scope 1-34 19 2 REQUIREMENTS FOR MOBILE STATION CDMA OPERATION . 2-1 20 2.1 Transmitter . 2-1 21 2.1.1 Frequency Parameters . 2-1 22 2.1.1.1 Channel Spacing and Designation 2-1 23
24、2.1.1.2 Frequency Tolerance 2-1 24 2.1.2 Power Output Characteristics 2-1 25 2.1.2.1 Maximum Output Power 2-1 26 2.1.2.2 Output Power Limits 2-1 27 2.1.2.2.1 Minimum Controlled Output Power 2-1 28 2.1.2.2.2 Gated Output Power . 2-2 29 2.1.2.2.2.1 Gated Output Power Except During a Serving Frequency
25、PUF 30 Probe 2-2 31 2.1.2.2.2.2 Gated Output Power During a Serving Frequency PUF Probe 2-3 32 3GPP2 C.S0002-F v2.0 ii 2.1.2.2.3 Standby Output Power . 2-3 1 2.1.2.3 Controlled Output Power . 2-3 2 2.1.2.3.1 Estimated Open Loop Output Power 2-4 3 2.1.2.3.1.1 Open Loop Output Power When Transmitting
26、on the Access 4 Channel . 2-4 5 2.1.2.3.1.2 Open Loop Output Power When Transmitting on the Enhanced 6 Access Channel 2-5 7 2.1.2.3.1.3 Open Loop Output Power When Transmitting on the Reverse 8 Common Control Channel 2-7 9 2.1.2.3.1.4 Open Loop Output Power When Transmitting on the Reverse 10 Traffi
27、c Channel with Radio Configuration 1 or 2 . 2-8 11 2.1.2.3.1.5 Open Loop Output Power When Transmitting on the Reverse 12 Traffic Channel with Radio Configuration 3, 4, 5, 6,7, or 8 . 2-11 13 2.1.2.3.2 Closed Loop Output Power . 2-12 14 2.1.2.3.3 Code Channel Output Power for Other than the Reverse
28、Pilot 15 Channel 2-15 16 2.1.2.3.3.1 Code Channel Output Power for the Reverse Secondary Pilot 17 Channel . 2-15 18 2.1.2.3.3.2 Code Channel Output Power for the Enhanced Access Channel 19 Header, Enhanced Access Channel Data, and Reverse Common Control 20 Channel Data . 2-17 21 2.1.2.3.3.3 Code Cha
29、nnel Output Power for the Reverse Packet Data 22 Control Channel . 2-18 23 2.1.2.3.3.4 Code Channel Output Power for the Reverse Request Channel . 2-21 24 2.1.2.3.3.5 Code Channel Output Power for the Reverse Acknowledgment 25 Channel . 2-23 26 2.1.2.3.3.6 Code Channel Output Power for the Reverse C
30、hannel Quality 27 Indicator Channel 2-27 28 2.1.2.3.3.7 Code Channel Output Power for the Reverse Traffic Channel 29 with Radio Configuration 3, 4, 5, 6, or 8 . 2-29 30 2.1.2.3.3.8 Code Channel Output Power for the Reverse Packet Data 31 Channel with Radio Configuration 7 . 2-36 32 2.1.2.4 Power Tra
31、nsition Characteristics . 2-40 33 2.1.2.4.1 Open Loop Estimation . 2-40 34 2.1.2.4.2 Closed Loop Correction 2-41 35 2.1.2.4.3 Phase Continuity Requirements for Radio Configurations 3 through 36 8 . 2-41 37 3GPP2 C.S0002-F v2.0 iii 2.1.3 Modulation Characteristics 2-41 1 2.1.3.1 Reverse CDMA Channel
32、Signals . 2-41 2 2.1.3.1.1 Channel Structures 2-43 3 2.1.3.1.1.1 Spreading Rate 1 2-44 4 2.1.3.1.1.2 Spreading Rate 3 2-58 5 2.1.3.1.2 Modulation Parameters 2-63 6 2.1.3.1.2.1 Spreading Rate 1 2-63 7 2.1.3.1.2.2 Spreading Rate 3 2-80 8 2.1.3.1.3 Data Rates . 2-90 9 2.1.3.1.4 Frame Error Detection 2-
33、93 10 2.1.3.1.4.1 Generation of the Frame Quality Indicator Bits . 2-95 11 2.1.3.1.4.1.1 Frame Quality Indicator of Length 16 . 2-95 12 2.1.3.1.4.1.2 Frame Quality Indicator of Length 12 . 2-95 13 2.1.3.1.4.1.3 Frame Quality Indicator of Length 10 . 2-96 14 2.1.3.1.4.1.4 Frame Quality Indicator of L
34、ength 8 . 2-96 15 2.1.3.1.4.1.5 Frame Quality Indicator of Length 6 except for the Reverse 16 Fundamental Channel with Radio Configuration 2 2-97 17 2.1.3.1.4.1.6 Frame Quality Indicator of Length 6 for the Reverse 18 Fundamental Channel with Radio Configuration 2 2-97 19 2.1.3.1.5 Forward Error Cor
35、rection . 2-98 20 2.1.3.1.5.1 Convolutional Encoding 2-100 21 2.1.3.1.5.1.1 Rate 1/4 Convolutional Code 2-100 22 2.1.3.1.5.1.2 Rate 1/3 Convolutional Code 2-101 23 2.1.3.1.5.1.3 Rate 1/2 Convolutional Code 2-102 24 2.1.3.1.5.2 Turbo Encoding 2-102 25 2.1.3.1.5.2.1 Rate 1/2, 1/3, 1/4, and 1/5 Turbo E
36、ncoders . 2-103 26 2.1.3.1.5.2.2 Turbo Code Termination . 2-105 27 2.1.3.1.5.2.3 Turbo Interleavers 2-106 28 2.1.3.1.5.3 Block Encoding 2-110 29 2.1.3.1.5.3.1 (12, 4) Block Code 2-110 30 2.1.3.1.5.3.2 (64, 6) Orthogonal Block Code 2-110 31 2.1.3.1.6 Code Symbol Repetition . 2-113 32 2.1.3.1.7 Punctu
37、ring . 2-115 33 3GPP2 C.S0002-F v2.0 iv 2.1.3.1.7.1 Convolutional Code Symbol Puncturing . 2-115 1 2.1.3.1.7.2 Turbo Code Symbol Puncturing . 2-115 2 2.1.3.1.7.3 Flexible and Variable Rate Puncturing . 2-116 3 2.1.3.1.8 Block Interleaving 2-117 4 2.1.3.1.8.1 Interleaving for the Reverse Traffic Chan
38、nel with Radio 5 Configurations 1 and 2 . 2-117 6 2.1.3.1.8.2 Bit-Reversal Interleaving 2-118 7 2.1.3.1.8.3 Interleaving for the Reverse Packet Data Channel 2-118 8 2.1.3.1.8.3.1 Symbol Separation . 2-119 9 2.1.3.1.8.3.2 Subblock Interleaving . 2-119 10 2.1.3.1.8.3.3 Symbol Grouping . 2-120 11 2.1.3
39、.1.9 Sequence Repetition. 2-121 12 2.1.3.1.10 Subpacket Symbol Selection for the Reverse Packet Data Channel . 2-121 13 2.1.3.1.11 Modulation for the Reverse Packet Data Channel . 2-122 14 2.1.3.1.11.1 BPSK Modulation . 2-122 15 2.1.3.1.11.2 QPSK Modulation . 2-122 16 2.1.3.1.11.3 8-PSK Modulation 2
40、-123 17 2.1.3.1.11.4 Modulation Types . 2-124 18 2.1.3.1.12 Sequence Demultiplexing and Walsh Processing for the Reverse 19 Packet Data Channel 2-125 20 2.1.3.1.13 Orthogonal Modulation and Spreading . 2-126 21 2.1.3.1.13.1 Orthogonal Modulation 2-126 22 2.1.3.1.13.2 Orthogonal Spreading 2-128 23 2.
41、1.3.1.14 Gated Transmission . 2-131 24 2.1.3.1.14.1 Rates and Gating for Radio Configurations 1 and 2 2-131 25 2.1.3.1.14.2 Data Burst Randomizing Algorithm for Radio Configurations 1 26 and 2 . 2-134 27 2.1.3.1.14.3 Gating During a PUF Probe 2-135 28 2.1.3.1.14.4 Reverse Pilot Channel Gating . 2-13
42、5 29 2.1.3.1.14.5 Reverse Secondary Pilot Channel Gating 2-136 30 2.1.3.1.14.6 Enhanced Access Channel Preamble Gating . 2-136 31 2.1.3.1.14.7 Reverse Common Control Channel Preamble Gating 2-136 32 2.1.3.1.14.8 Reverse Channel Quality Indicator Channel Gating 2-136 33 3GPP2 C.S0002-F v2.0 v 2.1.3.1
43、.14.9 Reverse Fundamental Channel Gating 2-136 1 2.1.3.1.14.10 Reverse Pilot Channel Gating (Radio Configuration 8) . 2-136 2 2.1.3.1.15 Reverse Power Control Subchannel 2-137 3 2.1.3.1.15.1 Reverse Power Control Subchannel Structure . 2-137 4 2.1.3.1.15.2 Outer Power Control Loop 2-146 5 2.1.3.1.15
44、.3 Inner Power Control Loop . 2-148 6 2.1.3.1.16 Direct Sequence Spreading . 2-149 7 2.1.3.1.17 Quadrature Spreading 2-151 8 2.1.3.1.17.1 Spreading Rate 1 2-154 9 2.1.3.1.17.2 Spreading Rate 3 2-155 10 2.1.3.1.18 Baseband Filtering . 2-156 11 2.1.3.1.18.1 Spreading Rate 1 2-156 12 2.1.3.1.18.2 Sprea
45、ding Rate 3 2-158 13 2.1.3.1.19 Carrier Phase Offset for Radio Configurations 1 and 2 2-160 14 2.1.3.2 Reverse Pilot Channel 2-160 15 2.1.3.2.1 Reverse Power Control Subchannel 2-160 16 2.1.3.2.2 Reverse Pilot Channel Spreading 2-161 17 2.1.3.2.3 Reverse Pilot Channel Gating . 2-161 18 2.1.3.2.4 Rev
46、erse Pilot Channel Operation during Reverse Traffic Channel 19 Preamble . 2-164 20 2.1.3.2.5 Reverse Pilot Channel Quadrature Spreading . 2-165 21 2.1.3.2.6 Reverse Pilot Channel Baseband Filtering 2-165 22 2.1.3.2.7 Reverse Pilot Channel Transmission Processing . 2-165 23 2.1.3.3 Reverse Secondary
47、Pilot Channel . 2-165 24 2.1.3.3.1 Reverse Secondary Pilot Channel Time Alignment 2-165 25 2.1.3.3.2 Reverse Secondary Pilot Channel Orthogonal Spreading . 2-166 26 2.1.3.3.3 Reverse Secondary Pilot Channel Gating 2-166 27 2.1.3.3.4 Reverse Secondary Pilot Channel Quadrature Spreading 2-166 28 2.1.3
48、.3.5 Reverse Secondary Pilot Channel Baseband Filtering . 2-166 29 2.1.3.3.6 Reverse Secondary Pilot Channel Transmission Processing 2-166 30 2.1.3.4 Access Channel 2-166 31 2.1.3.4.1 Access Channel Time Alignment and Modulation Rate . 2-166 32 2.1.3.4.2 Access Channel Frame Structure . 2-167 33 3GP
49、P2 C.S0002-F v2.0 vi 2.1.3.4.2.1 Access Channel Preamble 2-167 1 2.1.3.4.3 Access Channel Convolutional Encoding 2-167 2 2.1.3.4.4 Access Channel Code Symbol Repetition 2-168 3 2.1.3.4.5 Access Channel Interleaving 2-168 4 2.1.3.4.6 Access Channel Modulation . 2-168 5 2.1.3.4.7 Access Channel Gating 2-168 6 2.1.3.4.8 Access Channel Direct Sequence Spreading . 2-168 7 2.1.3.4.9 Access Channel Quadrature Spreading 2-168 8 2.1.3.4.10 Access Channel Baseband Filtering . 2-168 9 2.1.3.4.11 Access Channel Transmission Processing 2-168 10 2.1.3.5 Enhanced Access Channel . 2-168 11 2.1.3.5.1
