1、 TIA-1038 October 2009 Signaling Conformance Test Specification for cdma2000 Location Services NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and i
2、mprovement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products no
3、t conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards In
4、stitute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable reg
5、ulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0157, formulated under the cognizance of the TIA TR-45 Mobile (b) there is
6、 no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use
7、of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from
8、 the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, whic
9、h are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Docu
10、ment or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether su
11、ch reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii)
12、 TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to
13、TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of th
14、e Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL P
15、ROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVIC
16、E REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONS
17、EQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF
18、DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. C.S059-0 v1.0 ii 1 CONTENTS 2 1 Introduction 1-1 3 1.1 General Description1-1 4 1.2 References.1-2 5 1.3 Definitions, Symbols and Abreviations1-3 6 1.4 Setup
19、 and Chanel conditions.1-5 7 2 MS response elements2-1 8 2.1 Provide MS Information2-1 9 2.2 Provide Autonomous Measurement Weighting Factors2-2 10 2.3 Provide Pseudorange Measurement2-3 11 2.4 Provide Pilot Phase measurement.2-5 12 2.5 Provide Location Response2-6 13 2.6 Provide Time Ofset Measurem
20、ent.2-8 14 2.7 Provide Cancelation Acknowledgement2-9 15 3 Location Request (GPS).3-11 16 3.1 Mobile Station Terminated Location Request Originated on Dedicated Chanel (MS 17 Asisted).3-11 18 3.2 Mobile Station Terminated Location Request Originated on Dedicated Chanel (MS 19 Based).3-13 20 4 Locati
21、on Request (AFLT)4-17 21 4.1 Location Request Originated on Dedicated Chanel.4-17 22 5 Location Request (Hybrid).5-19 23 5.1 Mobile Station Terminated Cal, Location Request Originated on Dedicated Chanel (MS 24 Asisted).5-19 25 6 Cal Procesing.6-22 26 6.1 Mobile Station Cal Origination, Location Req
22、uest Restricted to Emergency Cals.6-22 27 6.2 Mobile Station Cal Back, Location Request Restricted to Emergency Cals6-24 28 6.3 Mobile Station Cal Origination, Location Request Restricted to due to Privacy mode.6-27 29 7 ANEX A (Informative).7-31 30 7.1 Figures.7-31 31 8 ANEX B GPS Simulator Setings
23、 (Informative).8-32 32 33 34 35 C.S059-0 v1.0 FOREWORD 1 (This foreword is not part of this Standard.) 2 This Specification was prepared by Technical Specification Group C of the Third Generation 3 Partnership Project 2 (3GP2). This Specification is the first revision of the document and tests the 4
24、 signaling conformance requirements of the C.S02-0 (Position Determination Service for 5 cdma2001Spread Spectrum Systems) specification. Other signaling conformance specifications 6 such as C.S043-0 (Signaling Conforance Test Specification for cdma200 Spread Spectrum 7 Systems) do not cover Position
25、 Determination Services signaling conformance test. 8 SCOPE 9 The objective of these tests is to demonstrate mobile station compliance to Position Determination 10 Services mesaging and protocol requirements in the cdma200 family of standards, with emphasis 11 on the reference (contained in ), indic
26、ated in the Traceability sections of each test case. This 12 standard does not adres al posible test cases. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 1cdma200is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (
27、OPs) of 3GP2. Geographicaly (and as of the date of publication), cdma200 is a registered trademark of the Telecomunications Industry Asociation (TIA-USA) in the United States. C.S059-0 v1.0 iv No Text 1 2 3 4 C.S059-0 v1.0 1-1 1 Introduction 1 2 1.1 General Description 3 This specification defines P
28、osition Determination Services signaling conformance tests for CDMA 4 mobile stations. In this document, mobile station refers to a subscriber terminal, handset, PDA, 5 wireles local lop unit, or any other subscriber terminal that comunicates with the base station at 6 the air interface. Base statio
29、n refers to the composite functionality of the base station and conected 7 network elements or emulators. 8 Execution Strategy: Separate signaling conformance tests are specified for mobile stations. Tests are 9 typicaly performed using an emulator to interface with the unit under test, with a cable
30、d conection 10 for the RF interface. Any test should be executed only if unit under test suports coresponding 11 feature. 12 13 14 C.S059-0 v1.0 1-2 1.2 References 1 2 1.2.1 Normative References 3 The folowing standards are referenced in this text. At the time of publication, the 4 editions indicate
31、d were valid. Al standards are subject to revision, and parties to 5 agrements based on this standard are encouraged to investigate the posibility of 6 aplying the most recent editions of the standards indicated below. ANSI and TIA 7 maintain registers of curently valid national standards published
32、by them. 8 1 3GP2 C.S02-0 v3.0 Position Determination Service Standard for 9 Dual-Mode Spread Spectrum Systems, March 201 10 2 3GP2 C.S005-C, Uper Layer (Layer 3) Signaling Standard for 11 cdma200 Spread Spectrum Systems, May 202. 12 13 14 15 C.S059-0 v1.0 1-3 1.3 Definitions, Symbols and Abreviatio
33、ns 1 2 1.3.1 Suplementary Terms and Definitions 3 4 Advanced Forward Link Trilateration (AFLT). 5 A geolocation technique that utilizes the mobile stations measured time of arival of radio 6 signals from the base stations (and, posibly, other terestrial measurements). 7 AFLT. 8 Se Advanced Forward L
34、ink Trilateration. 9 Almanac. 10 Se GPS Almanac. 11 Asistance Data. 12 The asistance data provided by the base station to the mobile station for various purposes 13 (e.g., acquisition, location calculation or sensitivity improvement). 14 Base Station. 15 The base station includes the transceiver equ
35、ipment, Mobile Switching Center (MSC), Mobile 16 Positioning Center (MPC), Position Determination Entity (PDE) and any Inter-Working 17 Function (IWF) required for network conection. 18 C/N0. 19 The ratio of carier signal power (C) to the power spectral density of background noise (N0).20 DBM. 21 Da
36、ta Burst Mesage. 22 Ephemeris. 23 The ephemeris data embeded in the GPS signal. The precise (high acuracy) orbital 24 parameters of one GPS satelite, as transmited by that satelite in GPS subframes 1, 2, and 3. 25 The ephemeris also includes satelite clock corection. 26 Fix. 27 The proces of perform
37、ing position computation. 28 Frame. 29 Se GPS Navigation Mesage Frame. 30 GPS. 31 Global Positioning System. 32 GPS Almanac. 33 The almanac data embeded in the GPS signal. The almanac data are a reduced-precision 34 subset of the clock and ephemeris parameters for al satelites, as transmited by ever
38、y satelite 35 in GPS subframes 4 and 5. 36 Location. 37 C.S059-0 v1.0 1-4 The terms “location” and “position” are used interchangeably throughout this document. In 1 this respect, the definition of the term difers from the historic use of location in wireles 2 systems to identify the mobiles curent
39、serving system. Se Position. 3 Mobile Station (MS). 4 A station that comunicates with the base station. 5 Mobile Station Originated Mesage. 6 A mesage originating from a mobile station. 7 Mobile Station Terminated Mesage. 8 A mesage received by a mobile station. 9 ms. 10 Milisecond (10-3second). 11
40、MS. 12 Se Mobile Station. 13 MSC. 14 Se Mobile Switching Center. 15 PDE. 16 Se Position Determination Entity. 17 PN Ofset. 18 The PN ofset measured in units of 64 PN chips of a pilot, relative to the zero-ofset pilot PN 19 sequence. 20 Position. 21 The geographic position of the mobile station expre
41、sed in latitude and longitude. 22 Position Determination Entity (PDE). 23 A network entity which manages the position or geographic location determination of the 24 mobile station. 25 PDM. 26 Position Determination Data Mesage. 27 s. 28 Second. 29 Sensitivity. 30 The minimum level (dBm) of received
42、GPS signal at mobile station that alows the 31 determination of the geolocation of the mobile station. 32 PRN Number. 33 The GPS PRN signal number as defined in ICD-GPS-20C, table 3-I. 34 Unsolicited Response. 35 A response element that is isued in the absence of the coresponding request element. 36
43、 Weighting Factor. 37 C.S059-0 v1.0 1-5 Weighting factor is a weight aplied to the GPS measurement as part of a Weighted Least 1 Squares Filter (WLSF) implementation of the navigation algorithm used by the mobile station 2 to compute its position. 3 4 1.4 Setup and Chanel conditions 5 Table 1.4-1 Sa
44、telite Signal Levels 6 Satelite PRN Number Signal Level (dBm) C/No (dB-Hz) 3, 14, 15, 17, 18, 21, 29, 31 -130 44 7 8 1.4.1 Chanel Conditions 9 Unles specified otherwise in a test case, chanel conditions for a test shal be set to have 10 low FER. 11 Base stations should be configured for normal opera
45、tion as specified in IS-200 unles 12 otherwise specified in a specific test. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 C.S059-0 v1.0 1-6 No Text 1 2 C.S059-0 v1.0 2-1 2 MS response elements 1 2 2.1 Provide MS Information 3 2.1.1 Definition 4 This wil demonstrate the Mobile Stations ability to res
46、pond to a Provide MS 5 Information request element 6 7 2.1.2 Traceability 8 (Se 1) 9 3.2.2.3.3.1 Request MS Information 10 11 2.1.3 Method Of Measurement 12 a. Conect a base station simulator to the mobile station as shown in Figure 7.1-1. 13 b. Configure the mobile station to operate in a band clas
47、 it suports. 14 c. Configure the base station acording to the standard test parameters listed in 1.4.1. 15 d. Power up the mobile station. 16 e. Setup a mobile station originated cal using a dialed number or Service Option that 17 trigers the PDE to start a position determination sesion. 18 f. Instr
48、uct the base station to send a position determination Data Burst Mesage with 19 burst type 00101 that includes a Position Determination Data Mesage to start a 20 sesion (SES_START = 1) and Request Mobile Station Information (REQ_TYPE = 21 010). 22 g. Verify the mobile station sends a position determ
49、ination Data Burst Mesage with a 23 burst type 00101 that includes a Position Determination Data Mesage with 24 Provide Mobile Station Information (RESP_TYPE = 010) within 750 ms. 25 h. Record the values returned by the mobile station. 26 i. Power down the mobile station. 27 28 29 2.1.4 Minimum Standard 30 The mobile station shal comply with step g. 31 C.S059-0 v1.0 2-2 2.2 Provide Autonomous Measurement Weighting Factors 1 2.2.1 Definition 2 This wil demonstrate the Mobile Stations ability to respond to a Provide Autonomous 3 Measurement Weighting Factors req
